Near field communication (NFC) is a technology for wireless transfer of small amounts of data between two devices. It uses very simple communication protocols and therefore allows quicker connection than BLE. However, because NFC uses magnetic induction to enable communication, the devices must be very close (< 10 cm) to connect.
NFC supports different modes of operation. In reader/writer mode, one of the NFC devices (the polling device ) is active and requests and reads data from the other device (the tag ). The NFC tag is passive. It does not generate an electromagnetic field, but it modulates the field that is generated by the polling device. The tag contains data, such as a URL, that can be read and written by the polling device.
The nRF52 IC contains an NFC tag that works in NFC-A technology (see NFCT — Near field communication tag ). The SDK provides libraries and modules to program two types of tag:
- The Type 2 Tag - based on the NFC Forum Type 2 Tag Operation Specification (see NFC Type 2 Tag for more information)
- The Type 4 Tag - based on the NFC Forum Type 4 Tag Operation Specification (see Experimental: NFC Type 4 Tag for more information)
NFC communication uses NFC Data Exchange Format (NDEF) messages to exchange data. The SDK provides modules for Generating messages and records to make it easy to generate such messages.
If you want to implement your own polling device, you can use the parser libraries supplied in the SDK. Note that you need additional hardware for reading NFC tags. The Adafruit NFC Shield library provides functions to read and write NFC tag data.
NFC Type 2 Tag nRF52 Series only
Experimental: NFC Type 4 Tag nRF52 Series only