Detailed Description
Macro Definition Documentation
| #define PWM0_ENABLED |
Enable PWM0 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define PWM1_ENABLED |
Enable PWM1 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define PWM2_ENABLED |
Enable PWM2 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define PWM3_ENABLED |
Enable PWM3 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define PWM_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define PWM_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define PWM_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define PWM_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
- 0 - Off
- 1 - Error
- 2 - Warning
- 3 - Info
- 4 - Debug
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_BASE_CLOCK |
Base clock.
Following options are available:
- 0 - 16 MHz
- 1 - 8 MHz
- 2 - 4 MHz
- 3 - 2 MHz
- 4 - 1 MHz
- 5 - 500 kHz
- 6 - 250 kHz
- 7 - 125 MHz
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_COUNT_MODE |
Count mode.
Following options are available:
- 0 - Up
- 1 - Up and Down
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice
Following options are available:
- 0 - 0 (highest)
- 1 - 1
- 2 - 2
- 3 - 3
- 4 - 4
- 5 - 5
- 6 - 6
- 7 - 7
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_LOAD_MODE |
Load mode.
Following options are available:
- 0 - Common
- 1 - Grouped
- 2 - Individual
- 3 - Waveform
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_OUT0_PIN |
Out0 pin.
Minimum value: 0 Maximum value: 31
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_OUT1_PIN |
Out1 pin.
Minimum value: 0 Maximum value: 31
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_OUT2_PIN |
Out2 pin.
Minimum value: 0 Maximum value: 31
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_OUT3_PIN |
Out3 pin.
Minimum value: 0 Maximum value: 31
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_STEP_MODE |
Step mode.
Following options are available:
- 0 - Auto
- 1 - Triggered
- Note
- This is an NRF_CONFIG macro.
| #define PWM_DEFAULT_CONFIG_TOP_VALUE |
Top value.
- Note
- This is an NRF_CONFIG macro.
| #define PWM_ENABLED |
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.