Macros |
|
| #define | UART_ENABLED |
|
Enable UART driver.
More...
|
|
| #define | UART_DEFAULT_CONFIG_HWFC |
|
Hardware Flow Control.
More...
|
|
| #define | UART_DEFAULT_CONFIG_PARITY |
|
Parity.
More...
|
|
| #define | UART_DEFAULT_CONFIG_BAUDRATE |
|
Default Baudrate.
More...
|
|
| #define | UART_DEFAULT_CONFIG_IRQ_PRIORITY |
|
Interrupt priority.
More...
|
|
| #define | UART_EASY_DMA_SUPPORT |
|
Driver supporting EasyDMA.
More...
|
|
| #define | UART_LEGACY_SUPPORT |
|
Driver supporting Legacy mode.
More...
|
|
| #define | UART0_ENABLED |
|
Enable UART0 instance.
More...
|
|
| #define | UART0_CONFIG_USE_EASY_DMA |
|
Default setting for using EasyDMA.
More...
|
|
| #define | UART1_ENABLED |
|
Enable UART1 instance.
More...
|
|
| #define | UART1_CONFIG_USE_EASY_DMA |
|
Default setting for using EasyDMA.
More...
|
|
| #define | UART_CONFIG_LOG_ENABLED |
|
Enables logging in the module.
More...
|
|
| #define | UART_CONFIG_LOG_LEVEL |
|
Default Severity level.
More...
|
|
| #define | UART_CONFIG_INFO_COLOR |
|
ANSI escape code prefix.
More...
|
|
| #define | UART_CONFIG_DEBUG_COLOR |
|
ANSI escape code prefix.
More...
|
|
Detailed Description
Macro Definition Documentation
| #define UART0_CONFIG_USE_EASY_DMA |
Default setting for using EasyDMA.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define UART0_ENABLED |
Enable UART0 instance.
- Note
- This is an NRF_CONFIG macro.
| #define UART1_CONFIG_USE_EASY_DMA |
Default setting for using EasyDMA.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define UART1_ENABLED |
Enable UART1 instance.
- Note
- This is an NRF_CONFIG macro.
| #define UART_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define UART_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define UART_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define UART_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
- 0 - Off
- 1 - Error
- 2 - Warning
- 3 - Info
- 4 - Debug
- Note
- This is an NRF_CONFIG macro.
| #define UART_DEFAULT_CONFIG_BAUDRATE |
Default Baudrate.
Following options are available:
- 323584 - 1200 baud
- 643072 - 2400 baud
- 1290240 - 4800 baud
- 2576384 - 9600 baud
- 3862528 - 14400 baud
- 5152768 - 19200 baud
- 7716864 - 28800 baud
- 10289152 - 38400 baud
- 15400960 - 57600 baud
- 20615168 - 76800 baud
- 30801920 - 115200 baud (nRF52 family only)
- 30924800 - 115200 baud (nRF51 family only)
- 61865984 - 230400 baud
- 67108864 - 250000 baud
- 121634816 - 460800 baud
- 251658240 - 921600 baud
- 268435456 - 57600 baud
- Note
- This is an NRF_CONFIG macro.
| #define UART_DEFAULT_CONFIG_HWFC |
Hardware Flow Control.
Following options are available:
- 0 - Disabled
- 1 - Enabled
- Note
- This is an NRF_CONFIG macro.
| #define UART_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
Following options are available:
- 0 - 0 (highest)
- 1 - 1
- 2 - 2
- 3 - 3
- 4 - 4 (except nRF51 family)
- 5 - 5 (except nRF51 family)
- 6 - 6 (except nRF51 family)
- 7 - 7 (except nRF51 family)
- Note
- This is an NRF_CONFIG macro.
| #define UART_DEFAULT_CONFIG_PARITY |
Parity.
Following options are available:
- 0 - Excluded
- 14 - Included
- Note
- This is an NRF_CONFIG macro.
| #define UART_EASY_DMA_SUPPORT |
Driver supporting EasyDMA.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define UART_ENABLED |
Enable UART driver.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define UART_LEGACY_SUPPORT |
Driver supporting Legacy mode.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.