COMP peripheral driver configuration

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

Hystheresis.

Following options are available:

• 0 - No
• 1 - 50mV

Note

This is an NRF_CONFIG macro.

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

Analog input.

Following options are available:

• 0
• 1
• 2
• 3
• 4
• 5
• 6
• 7

Note

This is an NRF_CONFIG macro.

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (except nRF51 family)
• 5 - 5 (except nRF51 family)
• 6 - 6 (except nRF51 family)
• 7 - 7 (except nRF51 family)

Note

This is an NRF_CONFIG macro.

Current Source.

Following options are available:

• 0 - Off
• 1 - 2.5 uA
• 2 - 5 uA
• 3 - 10 uA

Note

This is an NRF_CONFIG macro.

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

Main mode.

Following options are available:

• 0 - Single ended
• 1 - Differential

Note

This is an NRF_CONFIG macro.

Reference voltage.

Following options are available:

• 0 - Internal 1.2V
• 1 - Internal 1.8V
• 2 - Internal 2.4V
• 4 - VDD
• 7 - ARef

Note

This is an NRF_CONFIG macro.

Speed mode.

Following options are available:

• 0 - Low power
• 1 - Normal
• 2 - High speed

Note

This is an NRF_CONFIG macro.

Enable COMP driver.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.