Macros |
|
| #define | SPIS_ENABLED |
|
Set to 1 to activate.
More...
|
|
| #define | SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
|
Interrupt priority.
More...
|
|
| #define | SPIS_DEFAULT_MODE |
|
Mode.
More...
|
|
| #define | SPIS_DEFAULT_BIT_ORDER |
|
SPIS default bit order.
More...
|
|
| #define | SPIS_DEFAULT_DEF |
|
SPIS default DEF character.
More...
|
|
| #define | SPIS_DEFAULT_ORC |
|
SPIS default ORC character.
More...
|
|
| #define | SPIS0_ENABLED |
|
Enable SPIS0 instance.
More...
|
|
| #define | SPIS1_ENABLED |
|
Enable SPIS1 instance.
More...
|
|
| #define | SPIS2_ENABLED |
|
Enable SPIS2 instance.
More...
|
|
| #define | SPIS_CONFIG_LOG_ENABLED |
|
Enables logging in the module.
More...
|
|
| #define | SPIS_CONFIG_LOG_LEVEL |
|
Default Severity level.
More...
|
|
| #define | SPIS_CONFIG_INFO_COLOR |
|
ANSI escape code prefix.
More...
|
|
| #define | SPIS_CONFIG_DEBUG_COLOR |
|
ANSI escape code prefix.
More...
|
|
Detailed Description
Macro Definition Documentation
| #define SPIS0_ENABLED |
Enable SPIS0 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define SPIS1_ENABLED |
Enable SPIS1 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define SPIS2_ENABLED |
Enable SPIS2 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
- 0 - Off
- 1 - Error
- 2 - Warning
- 3 - Info
- 4 - Debug
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_DEFAULT_BIT_ORDER |
SPIS default bit order.
Following options are available:
- 0 - MSB first
- 1 - LSB first
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
Following options are available:
- 0 - 0 (highest)
- 1 - 1
- 2 - 2
- 3 - 3
- 4 - 4 (except nRF51 family)
- 5 - 5 (except nRF51 family)
- 6 - 6 (except nRF51 family)
- 7 - 7 (except nRF51 family)
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_DEFAULT_DEF |
SPIS default DEF character.
Minimum value: 0 Maximum value: 255
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_DEFAULT_MODE |
Mode.
Following options are available:
- 0 - MODE_0
- 1 - MODE_1
- 2 - MODE_2
- 3 - MODE_3
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_DEFAULT_ORC |
SPIS default ORC character.
Minimum value: 0 Maximum value: 255
- Note
- This is an NRF_CONFIG macro.
| #define SPIS_ENABLED |
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.