SPI/SPIM peripheral driver configuration

nRF5 SDK v12.1.0
Macros

Macros

#define SPI_ENABLED
Set to 1 to activate. More...
#define SPI_CONFIG_LOG_ENABLED
Enables logging in the module. More...
#define SPI_CONFIG_LOG_LEVEL
Default Severity level. More...
#define SPI_CONFIG_INFO_COLOR
ANSI escape code prefix. More...
#define SPI_CONFIG_DEBUG_COLOR
ANSI escape code prefix. More...
#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY
Interrupt priority. More...
#define SPI0_ENABLED
Enable SPI0 instance. More...
#define SPI0_USE_EASY_DMA
Use EasyDMA. More...
#define SPI1_ENABLED
Enable SPI1 instance. More...
#define SPI1_USE_EASY_DMA
Use EasyDMA. More...
#define SPI2_ENABLED
Enable SPI2 instance. More...
#define SPI2_USE_EASY_DMA
Use EasyDMA. More...

Detailed Description

Macro Definition Documentation

#define SPI0_ENABLED

Enable SPI0 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI0_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI1_ENABLED

Enable SPI1 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI1_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI2_ENABLED

Enable SPI2 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI2_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI_CONFIG_DEBUG_COLOR

ANSI escape code prefix.

Following options are available:

  • 0 - Default
  • 1 - Black
  • 2 - Red
  • 3 - Green
  • 4 - Yellow
  • 5 - Blue
  • 6 - Magenta
  • 7 - Cyan
  • 8 - White
Note
This is an NRF_CONFIG macro.
#define SPI_CONFIG_INFO_COLOR

ANSI escape code prefix.

Following options are available:

  • 0 - Default
  • 1 - Black
  • 2 - Red
  • 3 - Green
  • 4 - Yellow
  • 5 - Blue
  • 6 - Magenta
  • 7 - Cyan
  • 8 - White
Note
This is an NRF_CONFIG macro.
#define SPI_CONFIG_LOG_ENABLED

Enables logging in the module.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define SPI_CONFIG_LOG_LEVEL

Default Severity level.

Following options are available:

  • 0 - Off
  • 1 - Error
  • 2 - Warning
  • 3 - Info
  • 4 - Debug
Note
This is an NRF_CONFIG macro.
#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

  • 0 - 0 (highest)
  • 1 - 1
  • 2 - 2
  • 3 - 3
  • 4 - 4 (except nRF51 family)
  • 5 - 5 (except nRF51 family)
  • 6 - 6 (except nRF51 family)
  • 7 - 7 (except nRF51 family)
Note
This is an NRF_CONFIG macro.
#define SPI_ENABLED

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.