Software controlled TWI Master driver (deprecated). More...

Macros
#define	TWI_READ_BIT (0x01)
	If this bit is set in the address field, transfer direction is from slave to master.

#define	TWI_ISSUE_STOP ((bool)true)
	Parameter for twi_master_transfer .

#define	TWI_DONT_ISSUE_STOP ((bool)false)
	Parameter for twi_master_transfer .

#define	TWI_SCL_HIGH () do { NRF_GPIO->OUTSET = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

#define	TWI_SCL_LOW () do { NRF_GPIO->OUTCLR = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

#define	TWI_SDA_HIGH () do { NRF_GPIO->OUTSET = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

#define	TWI_SDA_LOW () do { NRF_GPIO->OUTCLR = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

#define	TWI_SDA_INPUT () do { NRF_GPIO->DIRCLR = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

#define	TWI_SDA_OUTPUT () do { NRF_GPIO->DIRSET = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

#define	TWI_SCL_OUTPUT () do { NRF_GPIO->DIRSET = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

#define	TWI_SDA_READ () ((NRF_GPIO->IN >> TWI_MASTER_CONFIG_DATA_PIN_NUMBER) & 0x1UL)

#define	TWI_SCL_READ () ((NRF_GPIO->IN >> TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER) & 0x1UL)

#define	TWI_DELAY () nrf_delay_us(4)

Functions
bool	twi_master_init (void)
	Function for initializing TWI bus IO pins and checks if the bus is operational. More...

bool	twi_master_transfer (uint8_t address, uint8_t *data, uint8_t data_length, bool issue_stop_condition)
	Function for transferring data over TWI bus. More...

Detailed Description

Software controlled TWI Master driver (deprecated).

Warning: This module is deprecated.

Supported features:

Repeated start
No multi-master
Only 7-bit addressing
Supports clock stretching (with optional SMBus style slave timeout)
Tries to handle slaves stuck in the middle of transfer

Macro Definition Documentation

#define TWI_DELAY ( ) nrf_delay_us(4)

Time to wait when pin states are changed. For fast-mode the delay can be zero and for standard-mode 4 us delay is sufficient.

#define TWI_SCL_HIGH ( ) do { NRF_GPIO->OUTSET = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

Pulls SCL line high

#define TWI_SCL_LOW ( ) do { NRF_GPIO->OUTCLR = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

Pulls SCL line low

#define TWI_SCL_OUTPUT ( ) do { NRF_GPIO->DIRSET = (1UL << TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER); } while (0)

Configures SCL pin as output

#define TWI_SCL_READ ( ) ((NRF_GPIO->IN >> TWI_MASTER_CONFIG_CLOCK_PIN_NUMBER) & 0x1UL)

Reads current state of SCL

#define TWI_SDA_HIGH ( ) do { NRF_GPIO->OUTSET = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

Pulls SDA line high

#define TWI_SDA_INPUT ( ) do { NRF_GPIO->DIRCLR = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

Configures SDA pin as input

#define TWI_SDA_LOW ( ) do { NRF_GPIO->OUTCLR = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

Pulls SDA line low

#define TWI_SDA_OUTPUT ( ) do { NRF_GPIO->DIRSET = (1UL << TWI_MASTER_CONFIG_DATA_PIN_NUMBER); } while (0)

Configures SDA pin as output

#define TWI_SDA_READ ( ) ((NRF_GPIO->IN >> TWI_MASTER_CONFIG_DATA_PIN_NUMBER) & 0x1UL)

Reads current state of SDA

Function Documentation

bool twi_master_init ( void )

Function for initializing TWI bus IO pins and checks if the bus is operational.

Both pins are configured as Standard-0, No-drive-1 (open drain).

Returns

Return values

true	TWI bus is clear for transfers.
false	TWI bus is stuck.

bool twi_master_transfer	(	uint8_t	address ,
		uint8_t *	data ,
		uint8_t	data_length ,
		bool	issue_stop_condition
	)

Function for transferring data over TWI bus.

If TWI master detects even one NACK from the slave or timeout occurs, STOP condition is issued and the function returns false. Bit 0 ( TWI_READ_BIT ) in the address parameter controls transfer direction;

If 1, master reads data_length number of bytes from the slave
If 0, master writes data_length number of bytes to the slave.

Note: Make sure at least data_length number of bytes is allocated in data if TWI_READ_BIT is set.; TWI_ISSUE_STOP

Parameters

address	Data transfer direction (LSB) / Slave address (7 MSBs).
data	Pointer to data.
data_length	Number of bytes to transfer.
issue_stop_condition	If TWI_ISSUE_STOP , STOP condition is issued before exiting function. If TWI_DONT_ISSUE_STOP , STOP condition is not issued before exiting function. If transfer failed for any reason, STOP condition will be issued in any case.

Returns

Return values

true	Data transfer succeeded without errors.
false	Data transfer failed.

Macros

Functions

Detailed Description

Macro Definition Documentation

Function Documentation