PWM peripheral driver configuration

nRF5 SDK v12.1.0
Macros

Macros

#define PWM_ENABLED
Set to 1 to activate. More...
#define PWM_DEFAULT_CONFIG_OUT0_PIN
Out0 pin. More...
#define PWM_DEFAULT_CONFIG_OUT1_PIN
Out1 pin. More...
#define PWM_DEFAULT_CONFIG_OUT2_PIN
Out2 pin. More...
#define PWM_DEFAULT_CONFIG_OUT3_PIN
Out3 pin. More...
#define PWM_DEFAULT_CONFIG_BASE_CLOCK
Base clock. More...
#define PWM_DEFAULT_CONFIG_COUNT_MODE
Count mode. More...
#define PWM_DEFAULT_CONFIG_TOP_VALUE
Top value. More...
#define PWM_DEFAULT_CONFIG_LOAD_MODE
Load mode. More...
#define PWM_DEFAULT_CONFIG_STEP_MODE
Step mode. More...
#define PWM_DEFAULT_CONFIG_IRQ_PRIORITY
Interrupt priority. More...
#define PWM0_ENABLED
Enable PWM0 instance. More...
#define PWM1_ENABLED
Enable PWM1 instance. More...
#define PWM2_ENABLED
Enable PWM2 instance. More...

Detailed Description

Macro Definition Documentation

#define PWM0_ENABLED

Enable PWM0 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define PWM1_ENABLED

Enable PWM1 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define PWM2_ENABLED

Enable PWM2 instance.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_BASE_CLOCK

Base clock.

Following options are available:

  • 0 - 16 MHz
  • 1 - 8 MHz
  • 2 - 4 MHz
  • 3 - 2 MHz
  • 4 - 1 MHz
  • 5 - 500 kHz
  • 6 - 250 kHz
  • 7 - 125 MHz
Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_COUNT_MODE

Count mode.

Following options are available:

  • 0 - Up
  • 1 - Up and Down
Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

  • 0 - 0 (highest)
  • 1 - 1
  • 2 - 2
  • 3 - 3
  • 4 - 4
  • 5 - 5
  • 6 - 6
  • 7 - 7
Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_LOAD_MODE

Load mode.

Following options are available:

  • 0 - Common
  • 1 - Grouped
  • 2 - Individual
  • 3 - Waveform
Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_OUT0_PIN

Out0 pin.

Minimum value: 0 Maximum value: 31

Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_OUT1_PIN

Out1 pin.

Minimum value: 0 Maximum value: 31

Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_OUT2_PIN

Out2 pin.

Minimum value: 0 Maximum value: 31

Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_OUT3_PIN

Out3 pin.

Minimum value: 0 Maximum value: 31

Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_STEP_MODE

Step mode.

Following options are available:

  • 0 - Auto
  • 1 - Triggered
Note
This is an NRF_CONFIG macro.
#define PWM_DEFAULT_CONFIG_TOP_VALUE

Top value.

Note
This is an NRF_CONFIG macro.
#define PWM_ENABLED

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.