UART module interface. More...

Modules
	UART driver configuration

Data Structures
struct	app_uart_comm_params_t
	UART communication structure holding configuration settings for the peripheral. More...

struct	app_uart_buffers_t
	UART buffer for transmitting/receiving data. More...

struct	app_uart_evt_t
	Struct containing events from the UART module. More...

Macros
#define	UART_PIN_DISCONNECTED 0xFFFFFFFF

#define	APP_UART_FIFO_INIT (P_COMM_PARAMS, RX_BUF_SIZE, TX_BUF_SIZE, EVT_HANDLER, IRQ_PRIO, ERR_CODE)
	Macro for safe initialization of the UART module in a single user instance when using a FIFO together with UART. More...

#define	APP_UART_INIT (P_COMM_PARAMS, EVT_HANDLER, IRQ_PRIO, ERR_CODE)
	Macro for safe initialization of the UART module in a single user instance. More...

Typedefs
typedef void(*	app_uart_event_handler_t )( app_uart_evt_t *p_app_uart_event)
	Function for handling app_uart event callback. More...

Enumerations
enum	app_uart_flow_control_t { APP_UART_FLOW_CONTROL_DISABLED , APP_UART_FLOW_CONTROL_ENABLED }
	UART Flow Control modes for the peripheral. More...

enum	app_uart_evt_type_t { APP_UART_DATA_READY , APP_UART_FIFO_ERROR , APP_UART_COMMUNICATION_ERROR , APP_UART_TX_EMPTY , APP_UART_DATA }
	Enumeration which defines events used by the UART module upon data reception or error. More...

Functions
uint32_t	app_uart_init (const app_uart_comm_params_t p_comm_params, app_uart_buffers_t p_buffers, app_uart_event_handler_t error_handler, app_irq_priority_t irq_priority)
	Function for initializing the UART module. Use this initialization when several instances of the UART module are needed. More...

uint32_t	app_uart_get (uint8_t *p_byte)
	Function for getting a byte from the UART. More...

uint32_t	app_uart_put (uint8_t byte)
	Function for putting a byte on the UART. More...

uint32_t	app_uart_flush (void)
	Function for flushing the RX and TX buffers (Only valid if FIFO is used). This function does nothing if FIFO is not used. More...

uint32_t	app_uart_close (void)
	Function for closing the UART module. More...

Detailed Description

UART module interface.

Macro Definition Documentation

#define APP_UART_FIFO_INIT	(	P_COMM_PARAMS,
		RX_BUF_SIZE,
		TX_BUF_SIZE,
		EVT_HANDLER,
		IRQ_PRIO,
		ERR_CODE
	)

Value:

         
          do
         
         \
        
         {
         
          \
         
          app_uart_buffers_t
         
         buffers;                                                                \
        
         static uint8_t     rx_buf[RX_BUF_SIZE];                                                    \
        
         static uint8_t     tx_buf[TX_BUF_SIZE];                                                    \
        
         \
        
         buffers.
         
          rx_buf
         
         = rx_buf;                                                              \
        
         buffers.rx_buf_size =
         
          sizeof
         
         (rx_buf);                                                     \
        
         buffers.tx_buf      = tx_buf;                                                              \
        
         buffers.tx_buf_size =
         
          sizeof
         
         (tx_buf);                                                     \
        
         ERR_CODE =
         
          app_uart_init
         
         (P_COMM_PARAMS, &buffers, EVT_HANDLER, IRQ_PRIO);                  \
        
         }
         
          while
         
         (0)

Macro for safe initialization of the UART module in a single user instance when using a FIFO together with UART.

Parameters

[in]	P_COMM_PARAMS	Pointer to a UART communication structure: app_uart_comm_params_t
[in]	RX_BUF_SIZE	Size of desired RX buffer, must be a power of 2 or ZERO (No FIFO).
[in]	TX_BUF_SIZE	Size of desired TX buffer, must be a power of 2 or ZERO (No FIFO).
[in]	EVT_HANDLER	Event handler function to be called when an event occurs in the UART module.
[in]	IRQ_PRIO	IRQ priority, app_irq_priority_t, for the UART module irq handler.
[out]	ERR_CODE	The return value of the UART initialization function will be written to this parameter.

Note: Since this macro allocates a buffer and registers the module as a GPIOTE user when flow control is enabled, it must only be called once.

#define APP_UART_INIT	(	P_COMM_PARAMS,
		EVT_HANDLER,
		IRQ_PRIO,
		ERR_CODE
	)

Value:

         
          do
         
         \
        
         {                                                                                              \
        
         ERR_CODE =
         
          app_uart_init
         
         (P_COMM_PARAMS, NULL, EVT_HANDLER, IRQ_PRIO);                      \
        
         }
         
          while
         
         (0)

Macro for safe initialization of the UART module in a single user instance.

Parameters

[in]	P_COMM_PARAMS	Pointer to a UART communication structure: app_uart_comm_params_t
[in]	EVT_HANDLER	Event handler function to be called when an event occurs in the UART module.
[in]	IRQ_PRIO	IRQ priority, app_irq_priority_t, for the UART module irq handler.
[out]	ERR_CODE	The return value of the UART initialization function will be written to this parameter.

Note: Since this macro allocates registers the module as a GPIOTE user when flow control is enabled, it must only be called once.

#define UART_PIN_DISCONNECTED 0xFFFFFFFF

Value indicating that no pin is connected to this UART register.

Typedef Documentation

typedef void(* app_uart_event_handler_t)( app_uart_evt_t *p_app_uart_event)

Function for handling app_uart event callback.

Upon an event in the app_uart module this callback function will be called to notify the application about the event.

Parameters

[in] p_app_uart_event Pointer to UART event.

Enumeration Type Documentation

enum app_uart_evt_type_t

Enumeration which defines events used by the UART module upon data reception or error.

The event type is used to indicate the type of additional information in the event app_uart_evt_t .

Enumerator
APP_UART_DATA_READY	An event indicating that UART data has been received. The data is available in the FIFO and can be fetched using app_uart_get .
APP_UART_FIFO_ERROR	An error in the FIFO module used by the app_uart module has occured. The FIFO error code is stored in app_uart_evt_t.data.error_code field.
APP_UART_COMMUNICATION_ERROR	An communication error has occured during reception. The error is stored in app_uart_evt_t.data.error_communication field.
APP_UART_TX_EMPTY	An event indicating that UART has completed transmission of all available data in the TX FIFO.
APP_UART_DATA	An event indicating that UART data has been received, and data is present in data field. This event is only used when no FIFO is configured.

enum app_uart_flow_control_t

UART Flow Control modes for the peripheral.

Enumerator
APP_UART_FLOW_CONTROL_DISABLED	UART Hw Flow Control is disabled.
APP_UART_FLOW_CONTROL_ENABLED	Standard UART Hw Flow Control is enabled.

Function Documentation

uint32_t app_uart_close ( void )

Function for closing the UART module.

Return values

NRF_SUCCESS	If successfully closed.
NRF_ERROR_INVALID_PARAM	If an invalid user id is provided or the user id differs from the current active user.

uint32_t app_uart_flush ( void )

Function for flushing the RX and TX buffers (Only valid if FIFO is used). This function does nothing if FIFO is not used.

Return values

NRF_SUCCESS Flushing completed (Current implementation will always succeed).

uint32_t app_uart_get ( uint8_t * p_byte )

Function for getting a byte from the UART.

This function will get the next byte from the RX buffer. If the RX buffer is empty an error code will be returned and the app_uart module will generate an event upon reception of the first byte which is added to the RX buffer.

Parameters

[out] p_byte Pointer to an address where next byte received on the UART will be copied.

Return values

NRF_SUCCESS	If a byte has been received and pushed to the pointer provided.
NRF_ERROR_NOT_FOUND	If no byte is available in the RX buffer of the app_uart module.

uint32_t app_uart_init	(	const app_uart_comm_params_t *	p_comm_params ,
		app_uart_buffers_t *	p_buffers ,
		app_uart_event_handler_t	error_handler ,
		app_irq_priority_t	irq_priority
	)

Function for initializing the UART module. Use this initialization when several instances of the UART module are needed.

Note: Normally single initialization should be done using the APP_UART_INIT() or APP_UART_INIT_FIFO() macro depending on whether the FIFO should be used by the UART, as that will allocate the buffers needed by the UART module (including aligning the buffer correctly).

Parameters

[in]	p_comm_params	Pin and communication parameters.
[in]	p_buffers	RX and TX buffers, NULL is FIFO is not used.
[in]	error_handler	Function to be called in case of an error.
[in]	irq_priority	Interrupt priority level.

Return values

NRF_SUCCESS	If successful initialization.
NRF_ERROR_INVALID_LENGTH	If a provided buffer is not a power of two.
NRF_ERROR_NULL	If one of the provided buffers is a NULL pointer.

The below errors are propagated by the UART module to the caller upon registration when Hardware Flow Control is enabled. When Hardware Flow Control is not used, these errors cannot occur.

Return values

NRF_ERROR_INVALID_STATE	The GPIOTE module is not in a valid state when registering the UART module as a user.
NRF_ERROR_INVALID_PARAM	The UART module provides an invalid callback function when registering the UART module as a user. Or the value pointed to by *p_uart_uid is not a valid GPIOTE number.
NRF_ERROR_NO_MEM	GPIOTE module has reached the maximum number of users.

uint32_t app_uart_put ( uint8_t byte )

Function for putting a byte on the UART.

This call is non-blocking.

Parameters

[in] byte Byte to be transmitted on the UART.

Return values

NRF_SUCCESS	If the byte was successfully put on the TX buffer for transmission.
NRF_ERROR_NO_MEM	If no more space is available in the TX buffer. NRF_ERROR_NO_MEM may occur if flow control is enabled and CTS signal is high for a long period and the buffer fills up.
NRF_ERROR_INTERNAL	If UART driver reported error.

Modules

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Typedef Documentation

Enumeration Type Documentation

Function Documentation