Hardware access layer for managing the RADIO peripheral. More...

Data Structures
struct	nrf_radio_packet_conf_t
	Packet configuration. More...

Enumerations
enum	nrf_radio_task_t { NRF_RADIO_TASK_TXEN = offsetof(NRF_RADIO_Type, TASKS_TXEN), NRF_RADIO_TASK_RXEN = offsetof(NRF_RADIO_Type, TASKS_RXEN), NRF_RADIO_TASK_START = offsetof(NRF_RADIO_Type, TASKS_START), NRF_RADIO_TASK_STOP = offsetof(NRF_RADIO_Type, TASKS_STOP), NRF_RADIO_TASK_DISABLE = offsetof(NRF_RADIO_Type, TASKS_DISABLE), NRF_RADIO_TASK_RSSISTART = offsetof(NRF_RADIO_Type, TASKS_RSSISTART), NRF_RADIO_TASK_RSSISTOP = offsetof(NRF_RADIO_Type, TASKS_RSSISTOP), NRF_RADIO_TASK_BCSTART = offsetof(NRF_RADIO_Type, TASKS_BCSTART), NRF_RADIO_TASK_BCSTOP = offsetof(NRF_RADIO_Type, TASKS_BCSTOP), NRF_RADIO_TASK_EDSTART = offsetof(NRF_RADIO_Type, TASKS_EDSTART), NRF_RADIO_TASK_EDSTOP = offsetof(NRF_RADIO_Type, TASKS_EDSTOP), NRF_RADIO_TASK_CCASTART = offsetof(NRF_RADIO_Type, TASKS_CCASTART), NRF_RADIO_TASK_CCASTOP = offsetof(NRF_RADIO_Type, TASKS_CCASTOP) }
	RADIO tasks. More...

enum	nrf_radio_event_t { NRF_RADIO_EVENT_READY = offsetof(NRF_RADIO_Type, EVENTS_READY), NRF_RADIO_EVENT_ADDRESS = offsetof(NRF_RADIO_Type, EVENTS_ADDRESS), NRF_RADIO_EVENT_PAYLOAD = offsetof(NRF_RADIO_Type, EVENTS_PAYLOAD), NRF_RADIO_EVENT_END = offsetof(NRF_RADIO_Type, EVENTS_END), NRF_RADIO_EVENT_DISABLED = offsetof(NRF_RADIO_Type, EVENTS_DISABLED), NRF_RADIO_EVENT_DEVMATCH = offsetof(NRF_RADIO_Type, EVENTS_DEVMATCH), NRF_RADIO_EVENT_DEVMISS = offsetof(NRF_RADIO_Type, EVENTS_DEVMISS), NRF_RADIO_EVENT_RSSIEND = offsetof(NRF_RADIO_Type, EVENTS_RSSIEND), NRF_RADIO_EVENT_BCMATCH = offsetof(NRF_RADIO_Type, EVENTS_BCMATCH), NRF_RADIO_EVENT_CRCOK = offsetof(NRF_RADIO_Type, EVENTS_CRCOK), NRF_RADIO_EVENT_CRCERROR = offsetof(NRF_RADIO_Type, EVENTS_CRCERROR), NRF_RADIO_EVENT_FRAMESTART = offsetof(NRF_RADIO_Type, EVENTS_FRAMESTART), NRF_RADIO_EVENT_EDEND = offsetof(NRF_RADIO_Type, EVENTS_EDEND), NRF_RADIO_EVENT_EDSTOPPED = offsetof(NRF_RADIO_Type, EVENTS_EDSTOPPED), NRF_RADIO_EVENT_CCAIDLE = offsetof(NRF_RADIO_Type, EVENTS_CCAIDLE), NRF_RADIO_EVENT_CCABUSY = offsetof(NRF_RADIO_Type, EVENTS_CCABUSY), NRF_RADIO_EVENT_CCASTOPPED = offsetof(NRF_RADIO_Type, EVENTS_CCASTOPPED), NRF_RADIO_EVENT_RATEBOOST = offsetof(NRF_RADIO_Type, EVENTS_RATEBOOST), NRF_RADIO_EVENT_TXREADY = offsetof(NRF_RADIO_Type, EVENTS_TXREADY), NRF_RADIO_EVENT_RXREADY = offsetof(NRF_RADIO_Type, EVENTS_RXREADY), NRF_RADIO_EVENT_MHRMATCH = offsetof(NRF_RADIO_Type, EVENTS_MHRMATCH), NRF_RADIO_EVENT_PHYEND = offsetof(NRF_RADIO_Type, EVENTS_PHYEND) }
	RADIO events. More...

enum	nrf_radio_int_mask_t { NRF_RADIO_INT_READY_MASK = RADIO_INTENSET_READY_Msk, NRF_RADIO_INT_ADDRESS_MASK = RADIO_INTENSET_ADDRESS_Msk, NRF_RADIO_INT_PAYLOAD_MASK = RADIO_INTENSET_PAYLOAD_Msk, NRF_RADIO_INT_END_MASK = RADIO_INTENSET_END_Msk, NRF_RADIO_INT_DISABLED_MASK = RADIO_INTENSET_DISABLED_Msk, NRF_RADIO_INT_DEVMATCH_MASK = RADIO_INTENSET_DEVMATCH_Msk, NRF_RADIO_INT_DEVMISS_MASK = RADIO_INTENSET_DEVMISS_Msk, NRF_RADIO_INT_RSSIEND_MASK = RADIO_INTENSET_RSSIEND_Msk, NRF_RADIO_INT_BCMATCH_MASK = RADIO_INTENSET_BCMATCH_Msk, NRF_RADIO_INT_CRCOK_MASK = RADIO_INTENSET_CRCOK_Msk, NRF_RADIO_INT_CRCERROR_MASK = RADIO_INTENSET_CRCERROR_Msk, NRF_RADIO_INT_FRAMESTART_MASK = RADIO_INTENSET_FRAMESTART_Msk, NRF_RADIO_INT_EDEND_MASK = RADIO_INTENSET_EDEND_Msk, NRF_RADIO_INT_EDSTOPPED_MASK = RADIO_INTENSET_EDSTOPPED_Msk, NRF_RADIO_INT_CCAIDLE_MASK = RADIO_INTENSET_CCAIDLE_Msk, NRF_RADIO_INT_CCABUSY_MASK = RADIO_INTENSET_CCABUSY_Msk, NRF_RADIO_INT_CCASTOPPED_MASK = RADIO_INTENSET_CCASTOPPED_Msk, NRF_RADIO_INT_RATEBOOST_MASK = RADIO_INTENSET_RATEBOOST_Msk, NRF_RADIO_INT_TXREADY_MASK = RADIO_INTENSET_TXREADY_Msk, NRF_RADIO_INT_RXREADY_MASK = RADIO_INTENSET_RXREADY_Msk, NRF_RADIO_INT_MHRMATCH_MASK = RADIO_INTENSET_MHRMATCH_Msk, NRF_RADIO_INT_PHYEND_MASK = RADIO_INTENSET_PHYEND_Msk }
	RADIO interrupts. More...

enum	nrf_radio_short_mask_t { NRF_RADIO_SHORT_READY_START_MASK = RADIO_SHORTS_READY_START_Msk, NRF_RADIO_SHORT_END_DISABLE_MASK = RADIO_SHORTS_END_DISABLE_Msk, NRF_RADIO_SHORT_DISABLED_TXEN_MASK = RADIO_SHORTS_DISABLED_TXEN_Msk, NRF_RADIO_SHORT_DISABLED_RXEN_MASK = RADIO_SHORTS_DISABLED_RXEN_Msk, NRF_RADIO_SHORT_ADDRESS_RSSISTART_MASK = RADIO_SHORTS_ADDRESS_RSSISTART_Msk, NRF_RADIO_SHORT_END_START_MASK = RADIO_SHORTS_END_START_Msk, NRF_RADIO_SHORT_ADDRESS_BCSTART_MASK = RADIO_SHORTS_ADDRESS_BCSTART_Msk, NRF_RADIO_SHORT_DISABLED_RSSISTOP_MASK = RADIO_SHORTS_DISABLED_RSSISTOP_Msk, NRF_RADIO_SHORT_RXREADY_CCASTART_MASK = RADIO_SHORTS_RXREADY_CCASTART_Msk, NRF_RADIO_SHORT_CCAIDLE_TXEN_MASK = RADIO_SHORTS_CCAIDLE_TXEN_Msk, NRF_RADIO_SHORT_CCABUSY_DISABLE_MASK = RADIO_SHORTS_CCABUSY_DISABLE_Msk, NRF_RADIO_SHORT_FRAMESTART_BCSTART_MASK = RADIO_SHORTS_FRAMESTART_BCSTART_Msk, NRF_RADIO_SHORT_READY_EDSTART_MASK = RADIO_SHORTS_READY_EDSTART_Msk, NRF_RADIO_SHORT_EDEND_DISABLE_MASK = RADIO_SHORTS_EDEND_DISABLE_Msk, NRF_RADIO_SHORT_CCAIDLE_STOP_MASK = RADIO_SHORTS_CCAIDLE_STOP_Msk, NRF_RADIO_SHORT_TXREADY_START_MASK = RADIO_SHORTS_TXREADY_START_Msk, NRF_RADIO_SHORT_RXREADY_START_MASK = RADIO_SHORTS_RXREADY_START_Msk, NRF_RADIO_SHORT_PHYEND_DISABLE_MASK = RADIO_SHORTS_PHYEND_DISABLE_Msk, NRF_RADIO_SHORT_PHYEND_START_MASK = RADIO_SHORTS_PHYEND_START_Msk }
	RADIO shortcuts. More...

enum	nrf_radio_cca_mode_t { NRF_RADIO_CCA_MODE_ED = RADIO_CCACTRL_CCAMODE_EdMode, NRF_RADIO_CCA_MODE_CARRIER = RADIO_CCACTRL_CCAMODE_CarrierMode, NRF_RADIO_CCA_MODE_CARRIER_AND_ED = RADIO_CCACTRL_CCAMODE_CarrierAndEdMode, NRF_RADIO_CCA_MODE_CARRIER_OR_ED = RADIO_CCACTRL_CCAMODE_CarrierOrEdMode, NRF_RADIO_CCA_MODE_ED_TEST1 = RADIO_CCACTRL_CCAMODE_EdModeTest1 }
	RADIO Clear Channel Assessment modes. More...

enum	nrf_radio_state_t { NRF_RADIO_STATE_DISABLED = RADIO_STATE_STATE_Disabled, NRF_RADIO_STATE_RXRU = RADIO_STATE_STATE_RxRu, NRF_RADIO_STATE_RXIDLE = RADIO_STATE_STATE_RxIdle, NRF_RADIO_STATE_RX = RADIO_STATE_STATE_Rx, NRF_RADIO_STATE_RXDISABLE = RADIO_STATE_STATE_RxDisable, NRF_RADIO_STATE_TXRU = RADIO_STATE_STATE_TxRu, NRF_RADIO_STATE_TXIDLE = RADIO_STATE_STATE_TxIdle, NRF_RADIO_STATE_TX = RADIO_STATE_STATE_Tx, NRF_RADIO_STATE_TXDISABLE = RADIO_STATE_STATE_TxDisable }
	Types of RADIO states. More...

enum	nrf_radio_txpower_t { NRF_RADIO_TXPOWER_POS8DBM = RADIO_TXPOWER_TXPOWER_Pos8dBm, NRF_RADIO_TXPOWER_POS7DBM = RADIO_TXPOWER_TXPOWER_Pos7dBm, NRF_RADIO_TXPOWER_POS6DBM = RADIO_TXPOWER_TXPOWER_Pos6dBm, NRF_RADIO_TXPOWER_POS5DBM = RADIO_TXPOWER_TXPOWER_Pos5dBm, NRF_RADIO_TXPOWER_POS4DBM = RADIO_TXPOWER_TXPOWER_Pos4dBm, NRF_RADIO_TXPOWER_POS3DBM = RADIO_TXPOWER_TXPOWER_Pos3dBm, NRF_RADIO_TXPOWER_POS2DBM = RADIO_TXPOWER_TXPOWER_Pos2dBm, NRF_RADIO_TXPOWER_0DBM = RADIO_TXPOWER_TXPOWER_0dBm, NRF_RADIO_TXPOWER_NEG4DBM = RADIO_TXPOWER_TXPOWER_Neg4dBm, NRF_RADIO_TXPOWER_NEG8DBM = RADIO_TXPOWER_TXPOWER_Neg8dBm, NRF_RADIO_TXPOWER_NEG12DBM = RADIO_TXPOWER_TXPOWER_Neg12dBm, NRF_RADIO_TXPOWER_NEG16DBM = RADIO_TXPOWER_TXPOWER_Neg16dBm, NRF_RADIO_TXPOWER_NEG20DBM = RADIO_TXPOWER_TXPOWER_Neg20dBm, NRF_RADIO_TXPOWER_NEG30DBM = RADIO_TXPOWER_TXPOWER_Neg30dBm, NRF_RADIO_TXPOWER_NEG40DBM = RADIO_TXPOWER_TXPOWER_Neg40dBm }
	Types of RADIO TX power. More...

enum	nrf_radio_mode_t { NRF_RADIO_MODE_NRF_1MBIT = RADIO_MODE_MODE_Nrf_1Mbit, NRF_RADIO_MODE_NRF_2MBIT = RADIO_MODE_MODE_Nrf_2Mbit, NRF_RADIO_MODE_NRF_250KBIT = RADIO_MODE_MODE_Nrf_250Kbit, NRF_RADIO_MODE_BLE_1MBIT = RADIO_MODE_MODE_Ble_1Mbit, NRF_RADIO_MODE_BLE_2MBIT = RADIO_MODE_MODE_Ble_2Mbit, NRF_RADIO_MODE_BLE_LR125KBIT = RADIO_MODE_MODE_Ble_LR125Kbit, NRF_RADIO_MODE_BLE_LR500KBIT = RADIO_MODE_MODE_Ble_LR500Kbit, NRF_RADIO_MODE_IEEE802154_250KBIT = RADIO_MODE_MODE_Ieee802154_250Kbit }
	Types of RADIO modes (data rate and modulation). More...

enum	nrf_radio_preamble_length_t { NRF_RADIO_PREAMBLE_LENGTH_8BIT = RADIO_PCNF0_PLEN_8bit, NRF_RADIO_PREAMBLE_LENGTH_16BIT = RADIO_PCNF0_PLEN_16bit, NRF_RADIO_PREAMBLE_LENGTH_32BIT_ZERO = RADIO_PCNF0_PLEN_32bitZero, NRF_RADIO_PREAMBLE_LENGTH_LONG_RANGE = RADIO_PCNF0_PLEN_LongRange }
	Types of preamble length. More...

enum	nrf_radio_crc_addr_t { NRF_RADIO_CRC_ADDR_INCLUDE = RADIO_CRCCNF_SKIPADDR_Include, NRF_RADIO_CRC_ADDR_SKIP = RADIO_CRCCNF_SKIPADDR_Skip, NRF_RADIO_CRC_ADDR_IEEE802154 = RADIO_CRCCNF_SKIPADDR_Ieee802154 }
	Types of CRC calculatons regarding address. More...

Functions
__STATIC_INLINE void	nrf_radio_task_trigger ( nrf_radio_task_t task)
	Function for activating a specific RADIO task. More...

__STATIC_INLINE uint32_t	nrf_radio_task_address_get ( nrf_radio_task_t task)
	Function for getting the address of a specific RADIO task register. More...

__STATIC_INLINE void	nrf_radio_event_clear ( nrf_radio_event_t event)
	Function for clearing a specific RADIO event. More...

__STATIC_INLINE bool	nrf_radio_event_check ( nrf_radio_event_t event)
	Function for retrieving the state of the RADIO event. More...

__STATIC_INLINE uint32_t	nrf_radio_event_address_get ( nrf_radio_event_t event)
	Function for getting the address of a specific RADIO event register. More...

__STATIC_INLINE void	nrf_radio_shorts_enable (uint32_t shorts_mask)
	Function for enabling specified RADIO shortcuts. More...

__STATIC_INLINE void	nrf_radio_shorts_disable (uint32_t shorts_mask)
	Function for disabling specified RADIO shortcuts. More...

__STATIC_INLINE void	nrf_radio_shorts_set (uint32_t shorts_mask)
	Function for setting the configuration of RADIO shortcuts. More...

__STATIC_INLINE uint32_t	nrf_radio_shorts_get (void)
	Function for getting the configuration of RADIO shortcuts. More...

__STATIC_INLINE void	nrf_radio_int_enable (uint32_t int_mask)
	Function for enabling specified RADIO interrupts. More...

__STATIC_INLINE void	nrf_radio_int_disable (uint32_t int_mask)
	Function for disabling specified RADIO interrupts. More...

__STATIC_INLINE bool	nrf_radio_int_enable_check ( nrf_radio_int_mask_t int_mask)
	Function for getting the state of a specific interrupt. More...

__STATIC_INLINE bool	nrf_radio_crc_status_check (void)
	Function for getting CRC status of last received packet. More...

__STATIC_INLINE uint8_t	nrf_radio_rxmatch_get (void)
	Function for getting the received address. More...

__STATIC_INLINE uint32_t	nrf_radio_rxcrc_get (void)
	Function for getting CRC field of the last received packet. More...

__STATIC_INLINE uint8_t	nrf_radio_dai_get (void)
	Function for getting the device address match index. More...

__STATIC_INLINE uint8_t	nrf_radio_pdustat_get (void)
	Function for getting status on payload length. More...

__STATIC_INLINE uint8_t	nrf_radio_cistat_get (void)
	Function for getting status on what rate packet is received with in Long Range. More...

__STATIC_INLINE void	nrf_radio_packetptr_set (const void *p_packet)
	Function for setting packet pointer to given location in memory. More...

__STATIC_INLINE void *	nrf_radio_packetptr_get (void)
	Function for getting packet pointer. More...

__STATIC_INLINE void	nrf_radio_frequency_set (uint16_t radio_frequency)
	Function for setting the radio frequency. More...

__STATIC_INLINE uint16_t	nrf_radio_frequency_get (void)
	Function for getting the radio frequency. More...

__STATIC_INLINE void	nrf_radio_txpower_set ( nrf_radio_txpower_t tx_power)
	Function for setting the radio transmit power. More...

__STATIC_INLINE nrf_radio_txpower_t	nrf_radio_txpower_get (void)
	Function for getting the radio transmit power. More...

__STATIC_INLINE void	nrf_radio_mode_set ( nrf_radio_mode_t radio_mode)
	Function for setting the radio data rate and modulation settings. More...

__STATIC_INLINE nrf_radio_mode_t	nrf_radio_mode_get (void)
	Function for getting Radio data rate and modulation settings. More...

__STATIC_INLINE void	nrf_radio_packet_configure (const nrf_radio_packet_conf_t *p_config)
	Function for setting the packet configuration. More...

__STATIC_INLINE void	nrf_radio_base0_set (uint32_t address)
	Function for setting the base address 0. More...

__STATIC_INLINE uint32_t	nrf_radio_base0_get (void)
	Function for getting the base address 0. More...

__STATIC_INLINE void	nrf_radio_base1_set (uint32_t address)
	Function for setting Base address 1. More...

__STATIC_INLINE uint32_t	nrf_radio_base1_get (void)
	Function for getting base address 1. More...

__STATIC_INLINE void	nrf_radio_prefix0_set (uint32_t prefixes)
	Function for setting prefixes bytes for logical addresses 0-3. More...

__STATIC_INLINE uint32_t	nrf_radio_prefix0_get (void)
	Function for getting prefixes bytes for logical addresses 0-3. More...

__STATIC_INLINE void	nrf_radio_prefix1_set (uint32_t prefixes)
	Function for setting prefixes bytes for logical addresses 4-7. More...

__STATIC_INLINE uint32_t	nrf_radio_prefix1_get (void)
	Function for getting prefixes bytes for logical addresses 4-7. More...

__STATIC_INLINE void	nrf_radio_txaddress_set (uint8_t txaddress)
	Function for setting the transmit address. More...

__STATIC_INLINE uint8_t	nrf_radio_txaddress_get (void)
	Function for getting the transmit address select. More...

__STATIC_INLINE void	nrf_radio_rxaddresses_set (uint8_t rxaddresses)
	Function for for selecting the receive addresses. More...

__STATIC_INLINE uint8_t	nrf_radio_rxaddresses_get (void)
	Function for getting receive address select. More...

__STATIC_INLINE void	nrf_radio_crc_configure (uint8_t crc_length, nrf_radio_crc_addr_t crc_address, uint32_t crc_polynominal)
	Function for configure CRC. More...

__STATIC_INLINE void	nrf_radio_crcinit_set (uint32_t crc_init_value)
	Function for setting CRC initial value. More...

__STATIC_INLINE uint32_t	nrf_radio_crcinit_get (void)
	Function for getting CRC initial value. More...

__STATIC_INLINE void	nrf_radio_ifs_set (uint32_t radio_ifs)
	Function for setting Inter Frame Spacing interval. More...

__STATIC_INLINE uint32_t	nrf_radio_ifs_get (void)
	Function for getting Inter Frame Spacing interval. More...

__STATIC_INLINE uint8_t	nrf_radio_rssi_sample_get (void)
	Function for getting RSSI sample result. More...

__STATIC_INLINE nrf_radio_state_t	nrf_radio_state_get (void)
	Function for getting the current state of the radio module. More...

__STATIC_INLINE void	nrf_radio_datawhiteiv_set (uint8_t datawhiteiv)
	Function for setting the data whitening initial value. More...

__STATIC_INLINE uint8_t	nrf_radio_datawhiteiv_get (void)
	Function for getting the data whitening initial value. More...

__STATIC_INLINE void	nrf_radio_bcc_set (uint32_t radio_bcc)
	Function for setting Bit counter compare. More...

__STATIC_INLINE uint32_t	nrf_radio_bcc_get (void)
	Function for getting Bit counter compare. More...

__STATIC_INLINE void	nrf_radio_dab_set (uint32_t dab_value, uint8_t segment)
	Function for setting Device address base segment. More...

__STATIC_INLINE uint32_t	nrf_radio_dab_get (uint8_t segment)
	Function for getting Device address base segment. More...

__STATIC_INLINE void	nrf_radio_dap_set (uint16_t dap_value, uint8_t prefix_index)
	Function for setting device address prefix. More...

__STATIC_INLINE uint32_t	nrf_radio_dap_get (uint8_t prefix_index)
	Function for getting Device address prefix. More...

__STATIC_INLINE void	nrf_radio_dacnf_set (uint8_t ena, uint8_t txadd)
	Function for setting device address match configuration. More...

__STATIC_INLINE uint8_t	nrf_radio_dacnf_ena_get (void)
	Function for getting ENA field of the Device address match configuration register. More...

__STATIC_INLINE uint8_t	nrf_radio_dacnf_txadd_get (void)
	Function for getting TXADD field of the Device address match configuration register. More...

__STATIC_INLINE void	nrf_radio_mhmu_search_pattern_set (uint32_t radio_mhmu_search_pattern)
	Function for setting MAC Header Match Unit search pattern configuration. More...

__STATIC_INLINE uint32_t	nrf_radio_mhmu_search_pattern_get (void)
	Function for getting MAC Header Match Unit search pattern configuration. More...

__STATIC_INLINE void	nrf_radio_mhmu_pattern_mask_set (uint32_t radio_mhmu_pattern_mask)
	Function for setting MAC Header Match Unit pattern mask configuration. More...

__STATIC_INLINE uint32_t	nrf_radio_mhmu_pattern_mask_get (void)
	Function for getting MAC Header Match Unit pattern mask configuration. More...

__STATIC_INLINE void	nrf_radio_modecnf0_set (bool fast_ramp_up, uint8_t default_tx)
	Function for setting Radio mode configuration register 0. More...

__STATIC_INLINE bool	nrf_radio_modecnf0_ru_get (void)
	Function for getting ramp-up time configuration of the Radio mode configuration register 0. More...

__STATIC_INLINE uint8_t	nrf_radio_modecnf0_dtx_get (void)
	Function for getting default TX value of the Radio mode configuration register 0. More...

__STATIC_INLINE void	nrf_radio_sfd_set (uint8_t sfd)
	Function for setting IEEE 802.15.4 start of frame delimiter. More...

__STATIC_INLINE uint8_t	nrf_radio_sfd_get (void)
	Function for getting IEEE 802.15.4 start of frame delimiter. More...

__STATIC_INLINE void	nrf_radio_ed_loop_count_set (uint32_t ed_loop_count)
	Function for setting number of iterations to perform ED scan. More...

__STATIC_INLINE uint8_t	nrf_radio_ed_sample_get (void)
	Function for getting Energy Detection level. More...

__STATIC_INLINE void	nrf_radio_cca_configure ( nrf_radio_cca_mode_t cca_mode, uint8_t cca_ed_threshold, uint8_t cca_corr_threshold, uint8_t cca_corr_cnt)
	Function for configuring the IEEE 802.15.4 clear channel assessment. More...

__STATIC_INLINE void	nrf_radio_power_set (bool radio_power)
	Function for setting power mode of the radio peripheral. More...

Detailed Description

Hardware access layer for managing the RADIO peripheral.

Enumeration Type Documentation

enum nrf_radio_cca_mode_t

RADIO Clear Channel Assessment modes.

Enumerator
NRF_RADIO_CCA_MODE_ED	Energy Above Threshold. Will report busy whenever energy is detected above set threshold.
NRF_RADIO_CCA_MODE_CARRIER	Carrier Seen. Will report busy whenever compliant IEEE 802.15.4 signal is seen.
NRF_RADIO_CCA_MODE_CARRIER_AND_ED	Energy Above Threshold AND Carrier Seen.
NRF_RADIO_CCA_MODE_CARRIER_OR_ED	Energy Above Threshold OR Carrier Seen.
NRF_RADIO_CCA_MODE_ED_TEST1	Energy Above Threshold test mode that will abort when first ED measurement over threshold is seen. No averaging.

enum nrf_radio_crc_addr_t

Types of CRC calculatons regarding address.

Enumerator
NRF_RADIO_CRC_ADDR_INCLUDE	CRC calculation includes address field.
NRF_RADIO_CRC_ADDR_SKIP	CRC calculation does not include address field.
NRF_RADIO_CRC_ADDR_IEEE802154	CRC calculation as per 802.15.4 standard.

enum nrf_radio_event_t

RADIO events.

Enumerator
NRF_RADIO_EVENT_READY	Radio has ramped up and is ready to be started.
NRF_RADIO_EVENT_ADDRESS	Address sent or received.
NRF_RADIO_EVENT_PAYLOAD	Packet payload sent or received.
NRF_RADIO_EVENT_END	Packet transmitted or received.
NRF_RADIO_EVENT_DISABLED	RADIO has been disabled.
NRF_RADIO_EVENT_DEVMATCH	A device address match occurred on the last received packet.
NRF_RADIO_EVENT_DEVMISS	No device address match occurred on the last received packet.
NRF_RADIO_EVENT_RSSIEND	Sampling of receive signal strength complete.
NRF_RADIO_EVENT_BCMATCH	Bit counter reached bit count value.
NRF_RADIO_EVENT_CRCOK	Packet received with correct CRC.
NRF_RADIO_EVENT_CRCERROR	Packet received with incorrect CRC.
NRF_RADIO_EVENT_FRAMESTART	IEEE 802.15.4 length field received.
NRF_RADIO_EVENT_EDEND	Energy Detection procedure ended.
NRF_RADIO_EVENT_EDSTOPPED	The sampling of Energy Detection has stopped.
NRF_RADIO_EVENT_CCAIDLE	Wireless medium in idle - clear to send.
NRF_RADIO_EVENT_CCABUSY	Wireless medium busy - do not send.
NRF_RADIO_EVENT_CCASTOPPED	The CCA has stopped.
NRF_RADIO_EVENT_RATEBOOST	Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.
NRF_RADIO_EVENT_TXREADY	RADIO has ramped up and is ready to be started TX path.
NRF_RADIO_EVENT_RXREADY	RADIO has ramped up and is ready to be started RX path.
NRF_RADIO_EVENT_MHRMATCH	MAC Header match found.
NRF_RADIO_EVENT_PHYEND	Generated in Ble_LR125Kbit, Ble_LR500Kbit and BleIeee802154_250Kbit modes when last bit is sent on the air.

enum nrf_radio_int_mask_t

RADIO interrupts.

Enumerator
NRF_RADIO_INT_READY_MASK	Interrupt on READY event.
NRF_RADIO_INT_ADDRESS_MASK	Interrupt on ADDRESS event.
NRF_RADIO_INT_PAYLOAD_MASK	Interrupt on PAYLOAD event.
NRF_RADIO_INT_END_MASK	Interrupt on END event.
NRF_RADIO_INT_DISABLED_MASK	Interrupt on DISABLED event.
NRF_RADIO_INT_DEVMATCH_MASK	Interrupt on DEVMATCH event.
NRF_RADIO_INT_DEVMISS_MASK	Interrupt on DEVMISS event.
NRF_RADIO_INT_RSSIEND_MASK	Interrupt on RSSIEND event.
NRF_RADIO_INT_BCMATCH_MASK	Interrupt on BCMATCH event.
NRF_RADIO_INT_CRCOK_MASK	Interrupt on CRCOK event.
NRF_RADIO_INT_CRCERROR_MASK	Interrupt on CRCERROR event.
NRF_RADIO_INT_FRAMESTART_MASK	Interrupt on FRAMESTART event.
NRF_RADIO_INT_EDEND_MASK	Interrupt on EDEND event.
NRF_RADIO_INT_EDSTOPPED_MASK	Interrupt on EDSTOPPED event.
NRF_RADIO_INT_CCAIDLE_MASK	Interrupt on CCAIDLE event.
NRF_RADIO_INT_CCABUSY_MASK	Interrupt on CCABUSY event.
NRF_RADIO_INT_CCASTOPPED_MASK	Interrupt on CCASTOPPED event.
NRF_RADIO_INT_RATEBOOST_MASK	Interrupt on RATEBOOST event.
NRF_RADIO_INT_TXREADY_MASK	Interrupt on TXREADY event.
NRF_RADIO_INT_RXREADY_MASK	Interrupt on RXREADY event.
NRF_RADIO_INT_MHRMATCH_MASK	Interrupt on MHRMATCH event.
NRF_RADIO_INT_PHYEND_MASK	Interrupt on PHYEND event.

enum nrf_radio_mode_t

Types of RADIO modes (data rate and modulation).

Enumerator
NRF_RADIO_MODE_NRF_1MBIT	1Mbit/s Nordic proprietary radio mode.
NRF_RADIO_MODE_NRF_2MBIT	2Mbit/s Nordic proprietary radio mode.
NRF_RADIO_MODE_NRF_250KBIT	250Kbit/s Nordic proprietary radio mode.
NRF_RADIO_MODE_BLE_1MBIT	1 Mbit/s Bluetooth Low Energy.
NRF_RADIO_MODE_BLE_2MBIT	2 Mbit/s Bluetooth Low Energy.
NRF_RADIO_MODE_BLE_LR125KBIT	Bluetooth Low Energy Long range 125 kbit/s TX, 125 kbit/s and 500 kbit/s RX
NRF_RADIO_MODE_BLE_LR500KBIT	Bluetooth Low Energy Long range 500 kbit/s TX, 125 kbit/s and 500 kbit/s RX
NRF_RADIO_MODE_IEEE802154_250KBIT	IEEE 802.15.4-2006 250 kbit/s.

enum nrf_radio_preamble_length_t

Types of preamble length.

Enumerator
NRF_RADIO_PREAMBLE_LENGTH_8BIT	8-bit preamble.
NRF_RADIO_PREAMBLE_LENGTH_16BIT	16-bit preamble.
NRF_RADIO_PREAMBLE_LENGTH_32BIT_ZERO	32-bit zero preamble used for IEEE 802.15.4.
NRF_RADIO_PREAMBLE_LENGTH_LONG_RANGE	Preamble - used for BTLE Long Range.

enum nrf_radio_short_mask_t

RADIO shortcuts.

Enumerator
NRF_RADIO_SHORT_READY_START_MASK	Shortcut between READY event and START task.
NRF_RADIO_SHORT_END_DISABLE_MASK	Shortcut between END event and DISABLE task.
NRF_RADIO_SHORT_DISABLED_TXEN_MASK	Shortcut between DISABLED event and TXEN task.
NRF_RADIO_SHORT_DISABLED_RXEN_MASK	Shortcut between DISABLED event and RXEN task.
NRF_RADIO_SHORT_ADDRESS_RSSISTART_MASK	Shortcut between ADDRESS event and RSSISTART task.
NRF_RADIO_SHORT_END_START_MASK	Shortcut between END event and START task.
NRF_RADIO_SHORT_ADDRESS_BCSTART_MASK	Shortcut between ADDRESS event and BCSTART task.
NRF_RADIO_SHORT_DISABLED_RSSISTOP_MASK	Shortcut between DISABLED event and RSSISTOP task.
NRF_RADIO_SHORT_RXREADY_CCASTART_MASK	Shortcut between RXREADY event and CCASTART task.
NRF_RADIO_SHORT_CCAIDLE_TXEN_MASK	Shortcut between CCAIDLE event and TXEN task.
NRF_RADIO_SHORT_CCABUSY_DISABLE_MASK	Shortcut between CCABUSY event and DISABLE task.
NRF_RADIO_SHORT_FRAMESTART_BCSTART_MASK	Shortcut between FRAMESTART event and BCSTART task.
NRF_RADIO_SHORT_READY_EDSTART_MASK	Shortcut between READY event and EDSTART task.
NRF_RADIO_SHORT_EDEND_DISABLE_MASK	Shortcut between EDEND event and DISABLE task.
NRF_RADIO_SHORT_CCAIDLE_STOP_MASK	Shortcut between CCAIDLE event and STOP task.
NRF_RADIO_SHORT_TXREADY_START_MASK	Shortcut between TXREADY event and START task.
NRF_RADIO_SHORT_RXREADY_START_MASK	Shortcut between RXREADY event and START task.
NRF_RADIO_SHORT_PHYEND_DISABLE_MASK	Shortcut between PHYEND event and DISABLE task.
NRF_RADIO_SHORT_PHYEND_START_MASK	Shortcut between PHYEND event and START task.

enum nrf_radio_state_t

Types of RADIO states.

Enumerator
NRF_RADIO_STATE_DISABLED	No operations are going on inside the radio and the power consumption is at a minimum.
NRF_RADIO_STATE_RXRU	The radio is ramping up and preparing for reception.
NRF_RADIO_STATE_RXIDLE	The radio is ready for reception to start.
NRF_RADIO_STATE_RX	Reception has been started.
NRF_RADIO_STATE_RXDISABLE	The radio is disabling the receiver.
NRF_RADIO_STATE_TXRU	The radio is ramping up and preparing for transmission.
NRF_RADIO_STATE_TXIDLE	The radio is ready for transmission to start.
NRF_RADIO_STATE_TX	The radio is transmitting a packet.
NRF_RADIO_STATE_TXDISABLE	The radio is disabling the transmitter.

enum nrf_radio_task_t

RADIO tasks.

Enumerator
NRF_RADIO_TASK_TXEN	Enable RADIO in TX mode.
NRF_RADIO_TASK_RXEN	Enable RADIO in RX mode.
NRF_RADIO_TASK_START	Start RADIO.
NRF_RADIO_TASK_STOP	Stop RADIO.
NRF_RADIO_TASK_DISABLE	Disable RADIO.
NRF_RADIO_TASK_RSSISTART	Start the RSSI and take one single sample of the receive signal strength.
NRF_RADIO_TASK_RSSISTOP	Stop the RSSI measurement.
NRF_RADIO_TASK_BCSTART	Start the bit counter.
NRF_RADIO_TASK_BCSTOP	Stop the bit counter.
NRF_RADIO_TASK_EDSTART	Start the Energy Detect measurement used in IEEE 802.15.4 mode.
NRF_RADIO_TASK_EDSTOP	Stop the Energy Detect measurement.
NRF_RADIO_TASK_CCASTART	Start the Clear Channel Assessment used in IEEE 802.15.4 mode.
NRF_RADIO_TASK_CCASTOP	Stop the Clear Channel Assessment.

enum nrf_radio_txpower_t

Types of RADIO TX power.

Enumerator
NRF_RADIO_TXPOWER_POS8DBM	8 dBm.
NRF_RADIO_TXPOWER_POS7DBM	7 dBm.
NRF_RADIO_TXPOWER_POS6DBM	6 dBm.
NRF_RADIO_TXPOWER_POS5DBM	5 dBm.
NRF_RADIO_TXPOWER_POS4DBM	4 dBm.
NRF_RADIO_TXPOWER_POS3DBM	3 dBm.
NRF_RADIO_TXPOWER_POS2DBM	2 dBm.
NRF_RADIO_TXPOWER_0DBM	0 dBm.
NRF_RADIO_TXPOWER_NEG4DBM	-4 dBm.
NRF_RADIO_TXPOWER_NEG8DBM	-8 dBm.
NRF_RADIO_TXPOWER_NEG12DBM	-12 dBm.
NRF_RADIO_TXPOWER_NEG16DBM	-16 dBm.
NRF_RADIO_TXPOWER_NEG20DBM	-20 dBm.
NRF_RADIO_TXPOWER_NEG30DBM	-30 dBm.
NRF_RADIO_TXPOWER_NEG40DBM	-40 dBm.

Function Documentation

__STATIC_INLINE uint32_t nrf_radio_base0_get ( void )

Function for getting the base address 0.

Returns: Base address 0.

__STATIC_INLINE void nrf_radio_base0_set ( uint32_t address )

Function for setting the base address 0.

Parameters

address Base address 0 value.

__STATIC_INLINE uint32_t nrf_radio_base1_get ( void )

Function for getting base address 1.

Returns: Base address 1.

__STATIC_INLINE void nrf_radio_base1_set ( uint32_t address )

Function for setting Base address 1.

Parameters

address Base address 1 value.

__STATIC_INLINE uint32_t nrf_radio_bcc_get ( void )

Function for getting Bit counter compare.

Returns: Bit counter compare.

__STATIC_INLINE void nrf_radio_bcc_set ( uint32_t radio_bcc )

Function for setting Bit counter compare.

Parameters

[in] radio_bcc Bit counter compare [bits].

__STATIC_INLINE void nrf_radio_cca_configure	(	nrf_radio_cca_mode_t	cca_mode ,
		uint8_t	cca_ed_threshold ,
		uint8_t	cca_corr_threshold ,
		uint8_t	cca_corr_cnt
	)

Function for configuring the IEEE 802.15.4 clear channel assessment.

Parameters

cca_mode	Mode of CCA.
cca_ed_threshold	Energy Detection threshold value.
cca_corr_threshold	Correlator Busy Threshold.
cca_corr_cnt	Limit of occurances above Correlator Threshold. When not equal to zero the correlator based signal detect is enabled.

__STATIC_INLINE uint8_t nrf_radio_cistat_get ( void )

Function for getting status on what rate packet is received with in Long Range.

Return values

0	The frame is received at 125kbps.
1	The frame is received at 500kbps.

__STATIC_INLINE void nrf_radio_crc_configure	(	uint8_t	crc_length ,
		nrf_radio_crc_addr_t	crc_address ,
		uint32_t	crc_polynominal
	)

Function for configure CRC.

Parameters

[in]	crc_length	CRC length in number of bytes [0-3].
[in]	crc_address	Include or exclude packet address field out of CRC.
[in]	crc_polynominal	CRC polynominal to set.

__STATIC_INLINE bool nrf_radio_crc_status_check ( void )

Function for getting CRC status of last received packet.

Return values

true	The packet was received without CRC error.
false	The packet was received with CRC error.

__STATIC_INLINE uint32_t nrf_radio_crcinit_get ( void )

Function for getting CRC initial value.

Returns: CRC initial value.

__STATIC_INLINE void nrf_radio_crcinit_set ( uint32_t crc_init_value )

Function for setting CRC initial value.

Parameters

crc_init_value CRC initial value

__STATIC_INLINE uint32_t nrf_radio_dab_get ( uint8_t segment )

Function for getting Device address base segment.

Parameters

segment Number of the Device address base segment.

Returns: Particular segment of the Device address base.

__STATIC_INLINE void nrf_radio_dab_set	(	uint32_t	dab_value ,
		uint8_t	segment
	)

Function for setting Device address base segment.

Parameters

dab_value	Particular base segment value.
segment	Index of the particular Device address base segment register.

__STATIC_INLINE uint8_t nrf_radio_dacnf_ena_get ( void )

Function for getting ENA field of the Device address match configuration register.

Returns: ENA field of the Device address match configuration register.

__STATIC_INLINE void nrf_radio_dacnf_set	(	uint8_t	ena ,
		uint8_t	txadd
	)

Function for setting device address match configuration.

Note: Read more about configuring device address match in the Product Specification.

Parameters

ena	Device address matching bitmask.
txadd	TxAdd bitmask.

__STATIC_INLINE uint8_t nrf_radio_dacnf_txadd_get ( void )

Function for getting TXADD field of the Device address match configuration register.

Returns: TXADD field of the Device address match configuration register.

__STATIC_INLINE uint8_t nrf_radio_dai_get ( void )

Function for getting the device address match index.

Returns: Device adress match index.

__STATIC_INLINE uint32_t nrf_radio_dap_get ( uint8_t prefix_index )

Function for getting Device address prefix.

Parameters

prefix_index Number of the Device address prefix segment.

Returns: Particular segment of the Device address prefix.

__STATIC_INLINE void nrf_radio_dap_set	(	uint16_t	dap_value ,
		uint8_t	prefix_index
	)

Function for setting device address prefix.

Parameters

dap_value	Particular device address prefix value.
prefix_index	Index of the particular device address prefix register.

__STATIC_INLINE uint8_t nrf_radio_datawhiteiv_get ( void )

Function for getting the data whitening initial value.

Returns: Data whitening initial value.

__STATIC_INLINE void nrf_radio_datawhiteiv_set ( uint8_t datawhiteiv )

Function for setting the data whitening initial value.

Parameters

datawhiteiv Data whitening initial value.

__STATIC_INLINE void nrf_radio_ed_loop_count_set ( uint32_t ed_loop_count )

Function for setting number of iterations to perform ED scan.

Parameters

[in] ed_loop_count Number of iterations during ED procedure.

__STATIC_INLINE uint8_t nrf_radio_ed_sample_get ( void )

Function for getting Energy Detection level.

Returns: IEEE 802.15.4 energy detect level.

__STATIC_INLINE uint32_t nrf_radio_event_address_get ( nrf_radio_event_t event )

Function for getting the address of a specific RADIO event register.

This function can be used by the PPI module.

Parameters

[in] event Requested Event.

Returns: Address of the specified event register.

__STATIC_INLINE bool nrf_radio_event_check ( nrf_radio_event_t event )

Function for retrieving the state of the RADIO event.

Parameters

[in] event Event to be checked.

Return values

true	The event has been generated.
false	The event has not been generated.

__STATIC_INLINE void nrf_radio_event_clear ( nrf_radio_event_t event )

Function for clearing a specific RADIO event.

Parameters

[in] event Event to clean.

__STATIC_INLINE uint16_t nrf_radio_frequency_get ( void )

Function for getting the radio frequency.

Returns: Frequency in MHz.

__STATIC_INLINE void nrf_radio_frequency_set ( uint16_t radio_frequency )

Function for setting the radio frequency.

Parameters

[in] radio_frequency Frequency in MHz.

__STATIC_INLINE uint32_t nrf_radio_ifs_get ( void )

Function for getting Inter Frame Spacing interval.

Returns: Inter frame spacing interval [us].

__STATIC_INLINE void nrf_radio_ifs_set ( uint32_t radio_ifs )

Function for setting Inter Frame Spacing interval.

Parameters

[in] radio_ifs Inter frame spacing interval [us].

__STATIC_INLINE void nrf_radio_int_disable ( uint32_t int_mask )

Function for disabling specified RADIO interrupts.

Parameters

[in] int_mask Mask of interrupts.

__STATIC_INLINE void nrf_radio_int_enable ( uint32_t int_mask )

Function for enabling specified RADIO interrupts.

Parameters

[in] int_mask Mask of interrupts.

__STATIC_INLINE bool nrf_radio_int_enable_check ( nrf_radio_int_mask_t int_mask )

Function for getting the state of a specific interrupt.

Parameters

[in] int_mask Interrupt to be checked.

Return values

true	The interrupt is enabled.
false	The interrupt is not enabled.

__STATIC_INLINE uint32_t nrf_radio_mhmu_pattern_mask_get ( void )

Function for getting MAC Header Match Unit pattern mask configuration.

Returns: Pattern mask.

__STATIC_INLINE void nrf_radio_mhmu_pattern_mask_set ( uint32_t radio_mhmu_pattern_mask )

Function for setting MAC Header Match Unit pattern mask configuration.

Parameters

[in] radio_mhmu_pattern_mask Pattern mask.

__STATIC_INLINE uint32_t nrf_radio_mhmu_search_pattern_get ( void )

Function for getting MAC Header Match Unit search pattern configuration.

Returns: Search Pattern Configuration.

__STATIC_INLINE void nrf_radio_mhmu_search_pattern_set ( uint32_t radio_mhmu_search_pattern )

Function for setting MAC Header Match Unit search pattern configuration.

Parameters

[in] radio_mhmu_search_pattern Search Pattern Configuration.

__STATIC_INLINE nrf_radio_mode_t nrf_radio_mode_get ( void )

Function for getting Radio data rate and modulation settings.

Returns: Radio data rate and modulation.

__STATIC_INLINE void nrf_radio_mode_set ( nrf_radio_mode_t radio_mode )

Function for setting the radio data rate and modulation settings.

Parameters

[in] radio_mode Radio data rate and modulation.

__STATIC_INLINE uint8_t nrf_radio_modecnf0_dtx_get ( void )

Function for getting default TX value of the Radio mode configuration register 0.

Returns: Default TX value.

__STATIC_INLINE bool nrf_radio_modecnf0_ru_get ( void )

Function for getting ramp-up time configuration of the Radio mode configuration register 0.

Return values

true	If the ramp-up time is set to fast.
false	If the ramp-up time is set to default.

__STATIC_INLINE void nrf_radio_modecnf0_set	(	bool	fast_ramp_up ,
		uint8_t	default_tx
	)

Function for setting Radio mode configuration register 0.

Parameters

fast_ramp_up	Use fast radio ramp-up time
default_tx	Default TX value during inactivity.

__STATIC_INLINE void nrf_radio_packet_configure ( const nrf_radio_packet_conf_t * p_config )

Function for setting the packet configuration.

Parameters

[in] p_config Pointer to the structure with packet configuration.

__STATIC_INLINE void* nrf_radio_packetptr_get ( void )

Function for getting packet pointer.

Returns: Pointer to tx or rx packet buffer.

__STATIC_INLINE void nrf_radio_packetptr_set ( const void * p_packet )

Function for setting packet pointer to given location in memory.

Parameters

[in] p_packet Packet pointer.

__STATIC_INLINE uint8_t nrf_radio_pdustat_get ( void )

Function for getting status on payload length.

Return values

0	The payload is lesser than PCNF1.MAXLEN.
1	The payload is greater than PCNF1.MAXLEN.

__STATIC_INLINE void nrf_radio_power_set ( bool radio_power )

Function for setting power mode of the radio peripheral.

Parameters

[in] radio_power If radio should be powered on.

__STATIC_INLINE uint32_t nrf_radio_prefix0_get ( void )

Function for getting prefixes bytes for logical addresses 0-3.

Returns: Prefixes bytes for logical addresses 0-3

__STATIC_INLINE void nrf_radio_prefix0_set ( uint32_t prefixes )

Function for setting prefixes bytes for logical addresses 0-3.

Parameters

prefixes Prefixes bytes for logical addresses 0-3.

__STATIC_INLINE uint32_t nrf_radio_prefix1_get ( void )

Function for getting prefixes bytes for logical addresses 4-7.

Returns: Prefixes bytes for logical addresses 4-7

__STATIC_INLINE void nrf_radio_prefix1_set ( uint32_t prefixes )

Function for setting prefixes bytes for logical addresses 4-7.

Parameters

prefixes Prefixes bytes for logical addresses 4-7.

__STATIC_INLINE uint8_t nrf_radio_rssi_sample_get ( void )

Function for getting RSSI sample result.

Note: The read value is a positive value while the actual received signal is a negative value. Actual received signal strength is therefore as follows: received signal strength = - read_value dBm .

Returns: RSSI sample result.

__STATIC_INLINE uint8_t nrf_radio_rxaddresses_get ( void )

Function for getting receive address select.

Returns: Receive address select.

__STATIC_INLINE void nrf_radio_rxaddresses_set ( uint8_t rxaddresses )

Function for for selecting the receive addresses.

Parameters

rxaddresses Enable or disable reception on logical address i. Read more in the Product Specification.

__STATIC_INLINE uint32_t nrf_radio_rxcrc_get ( void )

Function for getting CRC field of the last received packet.

Returns: CRC field of previously received packet.

__STATIC_INLINE uint8_t nrf_radio_rxmatch_get ( void )

Function for getting the received address.

Returns: Received address.

__STATIC_INLINE uint8_t nrf_radio_sfd_get ( void )

Function for getting IEEE 802.15.4 start of frame delimiter.

Returns: IEEE 802.15.4 start of frame delimiter.

__STATIC_INLINE void nrf_radio_sfd_set ( uint8_t sfd )

Function for setting IEEE 802.15.4 start of frame delimiter.

Parameters

sfd	IEEE 802.15.4 start of frame delimiter.

__STATIC_INLINE void nrf_radio_shorts_disable ( uint32_t shorts_mask )

Function for disabling specified RADIO shortcuts.

Parameters

[in] shorts_mask Mask of shortcuts.

__STATIC_INLINE void nrf_radio_shorts_enable ( uint32_t shorts_mask )

Function for enabling specified RADIO shortcuts.

Parameters

[in] shorts_mask Mask of shortcuts.

__STATIC_INLINE uint32_t nrf_radio_shorts_get ( void )

Function for getting the configuration of RADIO shortcuts.

Returns: Mask of currently enabled shortcuts.

__STATIC_INLINE void nrf_radio_shorts_set ( uint32_t shorts_mask )

Function for setting the configuration of RADIO shortcuts.

Parameters

[in] shorts_mask Shortcuts configuration to set.

__STATIC_INLINE nrf_radio_state_t nrf_radio_state_get ( void )

Function for getting the current state of the radio module.

Returns: Current radio state.

__STATIC_INLINE uint32_t nrf_radio_task_address_get ( nrf_radio_task_t task )

Function for getting the address of a specific RADIO task register.

This function can be used by the PPI module.

Parameters

[in] task Requested task.

Returns: Address of the specified task register.

__STATIC_INLINE void nrf_radio_task_trigger ( nrf_radio_task_t task )

Function for activating a specific RADIO task.

Parameters

[in] task Task to be activated.

__STATIC_INLINE uint8_t nrf_radio_txaddress_get ( void )

Function for getting the transmit address select.

Returns: Logical address to be used when transmitting a packet.

__STATIC_INLINE void nrf_radio_txaddress_set ( uint8_t txaddress )

Function for setting the transmit address.

Parameters

txaddress Logical address to be used when transmitting a packet.

__STATIC_INLINE nrf_radio_txpower_t nrf_radio_txpower_get ( void )

Function for getting the radio transmit power.

Returns: Transmit power of the radio.

__STATIC_INLINE void nrf_radio_txpower_set ( nrf_radio_txpower_t tx_power )

Function for setting the radio transmit power.

Parameters

[in] tx_power Transmit power of the radio [dBm].

RADIO HAL

nRF5 SDK v16.0.0

Data Structures

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation