Device Firmware Update (DFU) transport layer using USB. More...

Enumerations
enum	usb_dfu_op_code_t { USB_DFU_OP_CODE_CREATE_OBJECT = 0x01, USB_DFU_OP_CODE_SET_RECEIPT_NOTIF = 0x02, USB_DFU_OP_CODE_CALCULATE_CRC = 0x03, USB_DFU_OP_CODE_EXECUTE_OBJECT = 0x04, USB_DFU_OP_CODE_SELECT_OBJECT = 0x06, USB_DFU_OP_CODE_GET_SERIAL_MTU = 0x07, USB_DFU_OP_CODE_WRITE_OBJECT = 0x08, USB_DFU_OP_CODE_RESPONSE = 0x60 }
	USB DFU opcodes. More...

Functions
uint32_t	usb_dfu_transport_init (void)
	Function for initializing the transport layer. More...

uint32_t	usb_dfu_transport_close (void)
	Function for closing down the transport layer. More...

Detailed Description

Device Firmware Update (DFU) transport layer using USB.

The transport layer can be used for performing firmware updates over USB. The implementation uses SLIP to encode packets.

Enumeration Type Documentation

USB DFU opcodes.

Enumerator
USB_DFU_OP_CODE_CREATE_OBJECT	Value of the opcode field for a 'Create object' request.
USB_DFU_OP_CODE_SET_RECEIPT_NOTIF	Value of the opcode field for a 'Set Packet Receipt Notification' request.
USB_DFU_OP_CODE_CALCULATE_CRC	Value of the opcode field for a 'Calculating checksum' request.
USB_DFU_OP_CODE_EXECUTE_OBJECT	Value of the opcode field for an 'Initialize DFU parameters' request.
USB_DFU_OP_CODE_SELECT_OBJECT	Value of the opcode field for a 'Select object' request.
USB_DFU_OP_CODE_GET_SERIAL_MTU	Value of the opcode field for a 'Get Serial MTU' request.
USB_DFU_OP_CODE_WRITE_OBJECT	Value of the opcode indicating a write to the current object.
USB_DFU_OP_CODE_RESPONSE	Value of the opcode field for a response.

uint32_t usb_dfu_transport_close ( void )

Function for closing down the transport layer.

Return values

NRF_SUCCESS If the transport layer was correctly closed down.

uint32_t usb_dfu_transport_init ( void )

Function for initializing the transport layer.

Return values

NRF_SUCCESS If the transport layer was successfully initialized. Otherwise, an error code is returned.