Macros |
|
| #define | NRFX_TWIM_ENABLED |
|
Set to 1 to activate.
More...
|
|
| #define | NRFX_TWIM0_ENABLED |
|
Enable TWIM0 instance.
More...
|
|
| #define | NRFX_TWIM1_ENABLED |
|
Enable TWIM1 instance.
More...
|
|
| #define | NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY |
|
Frequency.
More...
|
|
| #define | NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT |
|
Enables bus holding after uninit.
More...
|
|
| #define | NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY |
|
Interrupt priority.
More...
|
|
| #define | NRFX_TWIM_CONFIG_LOG_ENABLED |
|
Enables logging in the module.
More...
|
|
| #define | NRFX_TWIM_CONFIG_LOG_LEVEL |
|
Default Severity level.
More...
|
|
| #define | NRFX_TWIM_CONFIG_INFO_COLOR |
|
ANSI escape code prefix.
More...
|
|
| #define | NRFX_TWIM_CONFIG_DEBUG_COLOR |
|
ANSI escape code prefix.
More...
|
|
| #define | NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED |
|
Enables nRF52 anomaly 109 workaround for TWIM.
More...
|
|
Detailed Description
Macro Definition Documentation
| #define NRFX_TWIM0_ENABLED |
Enable TWIM0 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM1_ENABLED |
Enable TWIM1 instance.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
- 0 - Default
- 1 - Black
- 2 - Red
- 3 - Green
- 4 - Yellow
- 5 - Blue
- 6 - Magenta
- 7 - Cyan
- 8 - White
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
- 0 - Off
- 1 - Error
- 2 - Warning
- 3 - Info
- 4 - Debug
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY |
Frequency.
Following options are available:
- 26738688 - 100k
- 67108864 - 250k
- 104857600 - 400k
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT |
Enables bus holding after uninit.
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Following options are available:
- 0 - 0 (highest)
- 1 - 1
- 2 - 2
- 3 - 3
- 4 - 4 (Software Component only)
- 5 - 5 (Software Component only)
- 6 - 6 (Software Component only)
- 7 - 7 (Software Component only)
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_ENABLED |
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.
| #define NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED |
Enables nRF52 anomaly 109 workaround for TWIM.
The workaround uses interrupts to wake up the CPU by catching the start event of zero-frequency transmission, clear the peripheral, set desired frequency, start the peripheral, and the proper transmission. See more in the Errata document or Anomaly 109 Addendum located at https://docs.nordicsemi.com/
Set to 1 to activate.
- Note
- This is an NRF_CONFIG macro.