Data Structures

nRF5 SDK v15.0.0
Here are the data structures with brief descriptions:
[detail level 1 2 ]
o C adjust_reason_t "Adjust Reason" field of the Current Time Characteristic
o C ant_bpwr_common_data_t Data structure for BPWR common data
o C ant_bpwr_disp_cb_t Bicycle Power Sensor RX control block
o C ant_bpwr_disp_config_t Bicycle Power Display configuration structure
o C ant_bpwr_page16_data_t Data structure for Bicycle Power data page 16
o C ant_bpwr_page1_data_t Data structure for Bicycle Power data page 1
o C ant_bpwr_page_torque_data_t Common data structure for Bicycle Power data pages 17, 18
o C ant_bpwr_profile_s Bicycle Power profile structure
o C ant_bpwr_sens_cb_t Bicycle Power Sensor control block
o C ant_bpwr_sens_config_t Bicycle Power Sensor configuration structure
o C ant_bpwr_simulator_cb_t BPWR simulator control block structure
o C ant_bpwr_simulator_cfg_t BPWR simulator configuration structure
o C ant_bpwr_simulator_t BPWR simulator structure
o C ant_bsc_combined_page0_data_t Data structure for Bicycle Combined Speed and Cadence data page 0
o C ant_bsc_disp_cb_t BSC Display control block
o C ant_bsc_disp_config_t BSC Display configuration structure
o C ant_bsc_page0_data_t Data structure for BSC data page 0
o C ant_bsc_page1_data_t Data structure for BSC data page 1
o C ant_bsc_page2_data_t Data structure for BSC data page 2
o C ant_bsc_page3_data_t Data structure for BSC data page 3
o C ant_bsc_page4_data_t Data structure for BSC data page 4
o C ant_bsc_page5_data_t Data structure for BSC data page 5
o C ant_bsc_profile_s BSC profile structure
o C ant_bsc_sens_cb_t BSC Sensor control block
o C ant_bsc_sens_config_t BSC Sensor configuration structure
o C ant_bsc_simulator_cb_t BSC simulator control block structure
o C ant_bsc_simulator_cfg_t BSC simulator configuration structure
o C ant_bsc_simulator_t BSC simulator structure
o C ant_channel_config_t ANT channel configuration structure
o C ant_common_page70_data_t Data structure for ANT+ common data page 70
o C ant_common_page80_data_t Data structure for ANT+ common data page 80
o C ant_common_page81_data_t Data structure for ANT+ common data page 81
o C ant_encrypt_adv_burst_settings_t Advanced burst settings used by the encrypted channel
o C ant_encrypt_channel_settings_t ANT channel cryptographic configuration
o C ant_encrypt_info_settings_t ANT encryption information
o C ant_encrypt_stack_settings_t ANT stack cryptographic configuration
o C ant_evt_t ANT stack event
o C ant_hrm_page0_data_t Data structure for HRM data page 0
o C ant_hrm_page1_data_t Data structure for HRM data page 1
o C ant_hrm_page2_data_t Data structure for HRM data page 2
o C ant_hrm_page3_data_t Data structure for HRM data page 3
o C ant_hrm_page4_data_t Data structure for HRM data page 4
o C ant_hrm_profile_s HRM profile structure
o C ant_hrm_sens_cb_t HRM Sensor control block
o C ant_hrm_sens_config_t HRM sensor configuration structure
o C ant_hrm_simulator_cb_t HRM simulator control block structure
o C ant_hrm_simulator_cfg_t HRM simulator configuration structure
o C ant_hrm_simulator_t HRM simulator structure
o C ant_request_controller_t ANT request controller structure
o C ant_sdm_common_data_t Data structure for SDM common data
o C ant_sdm_disp_cb_t SDM Display control block
o C ant_sdm_disp_config_t SDM Display configuration structure
o C ant_sdm_page1_data_t Data structure for SDM data page 1
o C ant_sdm_page22_data_t Data structure for SDM data page 22
o C ant_sdm_page2_data_t Data structure for SDM data page 2
o C ant_sdm_page3_data_t Data structure for SDM data page 3
o C ant_sdm_profile_s SDM profile structure
o C ant_sdm_sens_cb_t SDM Sensor control block
o C ant_sdm_sens_config_t SDM Sensor configuration structure
o C ant_sdm_simulator_cb_t SDM simulator control block structure
o C ant_sdm_simulator_cfg_t SDM simulator configuration structure
o C ant_sdm_simulator_t SDM simulator structure
o C ant_search_config_t ANT search configuration structure
o C antfs_beacon_status_byte1_t ANT-FS beacon status
o C antfs_dir_header_t ANT-FS directory header
o C antfs_dir_struct_t ANT-FS directory entry
o C antfs_event_return_t ANT-FS <-> application event communication object
o C antfs_params_t ANT-FS parameters
o C antfs_request_info_t ANT-FS download/upload request context
o C app_button_cfg_t Button configuration structure
o C app_fifo_t A FIFO instance structure
o C app_gpiote_user_pin_config_t Single pin configuration
o C app_pwm_config_t PWM configuration structure used for initialization
o C app_pwm_t PWM instance structure
o C app_sdc_config_t SDC configuration structure
o C app_sdc_info_t SDC information structure
o C app_timer_event_t Structure passed to app_scheduler
o C app_timer_t
o C app_uart_buffers_t UART buffer for transmitting/receiving data
o C app_uart_comm_params_t UART communication structure holding configuration settings for the peripheral
o C app_uart_evt_t Struct containing events from the UART module
o C app_uart_stream_comm_params_t UART communication structure holding configuration settings for the peripheral
o C app_usbd_audio_ac_iface_header_desc_t Audio class control interface header descriptor
o C app_usbd_audio_as_endpoint_desc_t Audio class audio endpoint descriptor
o C app_usbd_audio_as_format_type_one_desc_t Audio class audio streaming format type I descriptor
o C app_usbd_audio_as_format_type_three_desc_t Audio class audio streaming format type III descriptor
o C app_usbd_audio_as_format_type_two_desc_t Audio class audio streaming format type II descriptor
o C app_usbd_audio_as_iface_desc_t Audio class audio streaming interface descriptor
o C app_usbd_audio_ctx_t Audio class context
o C app_usbd_audio_feature_unit_desc_t Audio class feature unit descriptor
o C app_usbd_audio_input_terminal_desc_t Audio class input terminal descriptor
o C app_usbd_audio_inst_t Audio class part of class instance data
o C app_usbd_audio_output_terminal_desc_t Audio class output terminal descriptor
o C app_usbd_audio_req_t Audio class specific request handled via control endpoint
o C app_usbd_audio_subclass_desc_t Audio subclass descriptor
o C app_usbd_audio_t Audio class instance type
o C app_usbd_cdc_acm_ctx_t CDC ACM class context
o C app_usbd_cdc_acm_inst_t CDC ACM class part of class instance data
o C app_usbd_cdc_acm_notify_t CDC ACM serial state class notify
o C app_usbd_cdc_acm_req_t CDC ACM class specific request handled via control endpoint
o C app_usbd_cdc_acm_t CDC ACM class instance type
o C app_usbd_cdc_desc_acm_t CDC ACM Functional Descriptor
o C app_usbd_cdc_desc_call_mgmt_t CDC Call Management Functional Descriptor
o C app_usbd_cdc_desc_country_sel_t Country Selection Functional Descriptor
o C app_usbd_cdc_desc_header_t Header Functional Descriptor
o C app_usbd_cdc_desc_union_t Union Functional Descriptor
o C app_usbd_cdc_line_coding_t CDC line coding structure
o C app_usbd_cdc_notify_t Notification sent via CDC COMM endpoint
o C app_usbd_class_data_t Instance variable data
o C app_usbd_class_descriptor_ctx_t Class descriptor context
o C app_usbd_class_descriptor_state_t Class descriptor state
o C app_usbd_class_ep_conf_t Endpoint configuration
o C app_usbd_class_iface_conf_t Interface configuration
o C app_usbd_class_inst_s The instance structure itself
o C app_usbd_class_inst_t
o C app_usbd_class_methods_t Class interface function set
o C app_usbd_complex_evt_t Complex event variable type
o C app_usbd_config_t Configuration passed to app_usbd_init
o C app_usbd_core_setup_data_handler_desc_t Variable type used to register EP0 transfer handler
o C app_usbd_descriptor_configuration_t Configuration descriptor
o C app_usbd_descriptor_device_t Device descriptor
o C app_usbd_descriptor_ep_t Endpoint descriptor
o C app_usbd_descriptor_header_t Common descriptor header
o C app_usbd_descriptor_iad_t Interface association descriptor
o C app_usbd_descriptor_iface_t Interface descriptor
o C app_usbd_descriptor_string0_t Raw descriptor - String descriptor zero
o C app_usbd_descriptor_string_t Raw descriptor - Any normal string
o C app_usbd_dummy_ctx_t Dummy context
o C app_usbd_dummy_inst_t Dummy part of class instance data
o C app_usbd_dummy_t Dummy class instance type
o C app_usbd_evt_t Specific application event structure
o C app_usbd_hid_ctx_t HID internal context
o C app_usbd_hid_descriptor_t HID descriptor, binary layout
o C app_usbd_hid_generic_ctx_t HID generic context
o C app_usbd_hid_generic_inst_t HID generic part of class instance data
o C app_usbd_hid_generic_t HID generic class instance type
o C app_usbd_hid_inst_t USB HID instance
o C app_usbd_hid_kbd_ctx_t HID keyboard context
| \ C app_usbd_hid_kbd_ctx_internal_s
o C app_usbd_hid_kbd_inst_t HID keyboard part of class instance data
o C app_usbd_hid_kbd_t HID keyboard class instance type
o C app_usbd_hid_methods_t HID unified interface
o C app_usbd_hid_mouse_ctx_t HID mouse context
o C app_usbd_hid_mouse_inst_t HID mouse part of class instance data
o C app_usbd_hid_mouse_t HID mouse class instance type
o C app_usbd_hid_report_buffer_t HID report buffers
o C app_usbd_hid_subclass_desc_t HID subclass descriptor
o C app_usbd_internal_evt_t Internal event variable type
o C app_usbd_msc_cbw_t Command Block Wrapper (CBW)
o C app_usbd_msc_csw_t Command Status Wrapper (CSW)
o C app_usbd_msc_ctx_t MSC context
o C app_usbd_msc_inst_t MSC part of class instance data
o C app_usbd_msc_t Mass storage class instance type
o C app_usbd_nrf_dfu_trigger_ctx_t Nordic DFU Trigger context
o C app_usbd_nrf_dfu_trigger_desc_func_t Nordic DFU Trigger Functional Descriptor
o C app_usbd_nrf_dfu_trigger_inst_t Nordic DFU Trigger part of class instance data
o C app_usbd_nrf_dfu_trigger_nordic_info_t Nordic custom DFU information
o C app_usbd_nrf_dfu_trigger_t Nordic DFU Trigger class instance type
o C app_usbd_scsi_cmd_inquiry_resp_t Payload of APP_USBD_SCSI_CMD_INQUIRY response
o C app_usbd_scsi_cmd_inquiry_t Payload of APP_USBD_SCSI_CMD_INQUIRY command
o C app_usbd_scsi_cmd_modesense10_resp_t Payload of APP_USBD_SCSI_CMD_MODESENSE10 response
o C app_usbd_scsi_cmd_modesense10_t Payload of APP_USBD_SCSI_CMD_MODESENSE10 command
o C app_usbd_scsi_cmd_modesense6_resp_t Payload of APP_USBD_SCSI_CMD_MODESENSE6 response
o C app_usbd_scsi_cmd_modesense6_t Payload of APP_USBD_SCSI_CMD_MODESENSE6 command
o C app_usbd_scsi_cmd_read10_t Payload of APP_USBD_SCSI_CMD_READ10 command
o C app_usbd_scsi_cmd_read6_t Payload of APP_USBD_SCSI_CMD_READ6 command
o C app_usbd_scsi_cmd_readcapacity10_resp_t Payload of APP_USBD_SCSI_CMD_READCAPACITY10 response
o C app_usbd_scsi_cmd_readcapacity10_t Payload of APP_USBD_SCSI_CMD_READCAPACITY10 command
o C app_usbd_scsi_cmd_requestsense_resp_t Payload of APP_USBD_SCSI_CMD_REQUESTSENSE response
o C app_usbd_scsi_cmd_requestsense_t Payload of APP_USBD_SCSI_CMD_REQUESTSENSE command
o C app_usbd_scsi_cmd_write10_t Payload of APP_USBD_SCSI_CMD_WRITE10 command
o C app_usbd_scsi_cmd_write6_t Payload of APP_USBD_SCSI_CMD_WRITE6 command
o C app_usbd_setup_evt_t Specific application event structure with setup structure included
o C app_usbd_setup_t Internal redefinition of setup structure
o C app_usbd_setup_w_t Universal way to access 16 bit values and its parts
o C assert_info_t Structure containing info about an error of the type NRF_FAULT_ID_SDK_ASSERT
o C bh1745_data_t Measurement result
o C bh1745_instance_t Sensor instance information
o C blcm_link_ctx_storage_t Type of description that is used for registry of all current connections
o C ble_6lowpan_data_rx_t Event parameters associated with the BLE_6LO_EVT_INTERFACE_DATA_RX event
o C ble_6lowpan_event_param_t Asynchronous event parameter type
o C ble_6lowpan_event_t Asynchronous event type
o C ble_6lowpan_init_t Initialization parameters type
o C ble_add_char_params_t Add characteristic parameters structure
o C ble_add_char_user_desc_t Characteristic User Descriptor parameters
o C ble_add_descr_params_t Add descriptor parameters structure
o C ble_adv_mode_config_t
o C ble_adv_modes_config_t Options for the different advertisement modes
o C ble_advdata_conn_int_t Connection interval range structure
o C ble_advdata_manuf_data_t Manufacturer specific data structure
o C ble_advdata_service_data_t Service data structure
o C ble_advdata_t Advertising data structure. This structure contains all options and data needed for encoding and setting the advertising data
o C ble_advdata_tk_value_t Security Manager TK value
o C ble_advdata_uuid_list_t UUID list type
o C ble_advertising_init_t Initialization parameters for the Advertising Module
o C ble_advertising_t
o C ble_ancs_c_attr_list_t IOS notification attribute content wanted by our application
o C ble_ancs_c_attr_t IOS attribute structure. This type is used for both notification attributes and app attributes
o C ble_ancs_c_evt_app_attr_t
o C ble_ancs_c_evt_attr_t IOS notification attribute structure for incoming attributes
o C ble_ancs_c_evt_notif_t IOS notification structure
o C ble_ancs_c_evt_t ANCS client module event structure
o C ble_ancs_c_init_t Apple Notification client init structure, which contains all options and data needed for initialization of the client
o C ble_ancs_c_notif_flags_t Flags for iOS notifications
o C ble_ancs_c_service_t Structure used for holding the Apple Notification Center Service found during the discovery process
o C ble_ancs_c_t IOS notification structure, which contains various status information for the client
o C ble_ancs_parse_sm_t
o C ble_ans_alert_notification_t Alert Notification structure
o C ble_ans_alert_settings_t Alert Notification Setting structure containing the supported alerts in the service
o C ble_ans_c_evt_t Alert Notification Event structure
o C ble_ans_c_init_t Alert Notification init structure. This contains all options and data needed for initialization of the client
o C ble_ans_c_s Alert Notification structure. This contains various status information for the client
o C ble_ans_c_service_t Struct to hold information on the Alert Notification Service if found on the server
o C ble_ans_control_point_t Alert Notification Control Point structure
o C ble_bas_c_db_t Structure containing the handles related to the Battery Service found on the peer
o C ble_bas_c_evt_t Battery Service Client Event structure
o C ble_bas_c_init_t Battery Service Client initialization structure
o C ble_bas_c_s Battery Service Client structure
o C ble_bas_evt_t Battery Service event
o C ble_bas_init_t Battery Service init structure. This contains all options and data needed for initialization of the service
o C ble_bas_s Battery Service structure. This contains various status information for the service
o C ble_bps_evt_t Blood Pressure Service event
o C ble_bps_init_t Blood Pressure Service init structure. This contains all options and data needed for initialization of the service
o C ble_bps_meas_s Blood Pressure Service measurement structure. This contains a Blood Pressure measurement
o C ble_bps_s Blood Pressure Service structure. This contains various status information for the service
o C ble_button_t Structure containing the Button value received from the peer
o C ble_cgms_rec_t CGM Measurement record
o C ble_cgms_s Status information for the CGM Service
o C ble_cgms_socp_value_t Specific Operation Control Point value
o C ble_cgms_sst_t Required data for setting the SST characteristic value
o C ble_conn_params_evt_t Connection Parameters Module event
o C ble_conn_params_init_t Connection Parameters Module init structure. This contains all options and data needed for initialization of the connection parameters negotiation module
o C ble_conn_state_conn_handle_list_t Type used to present a list of conn_handles
o C ble_cs_ctrlpt_init_t Speed and Cadence Control Point init structure. This contains all options and data needed for initialization of the Speed and Cadence Control Point module
o C ble_cscs_evt_t Cycling Speed and Cadence Service event
o C ble_cscs_init_t Cycling Speed and Cadence Service init structure. This contains all options and data needed for initialization of the service
o C ble_cscs_meas_s Cycling Speed and Cadence Service measurement structure. This contains a Cycling Speed and Cadence Service measurement
o C ble_cscs_s Cycling Speed and Cadence Service structure. This contains various status information for the service
o C ble_cts_c_evt_t Current Time Service client event
o C ble_cts_c_handles_t Structure containing the handles related to the Heart Rate Service found on the peer
o C ble_cts_c_init_t Current Time Service client init structure. This structure contains all options and data needed for initialization of the client
o C ble_cts_c_s Current Time Service client structure. This structure contains status information for the client
o C ble_date_time_t Date and Time structure
o C ble_db_discovery_evt_t Structure containing the event from the DB discovery module to the application
o C ble_db_discovery_t Structure for holding the information related to the GATT database at the server
o C ble_dfu_buttonless_init_t Type used to initialize the Secure DFU Buttonless Service
o C ble_dfu_buttonless_t Type holding memory used by Secure DFU Buttonless Service
o C ble_dfu_t DFU Service
o C ble_dis_c_char_group_t Structure describing the group of DIS characteristics with which this module can interact
o C ble_dis_c_evt_disc_complete_t Event structure for BLE_DIS_C_EVT_DISCOVERY_COMPLETE
o C ble_dis_c_evt_read_rsp_err_t Event structure for BLE_DIS_C_EVT_DIS_C_READ_RSP_ERROR
o C ble_dis_c_evt_read_rsp_t Event structure for BLE_DIS_C_EVT_DIS_C_READ_RSP
o C ble_dis_c_evt_t Structure containing the DIS event data received from the peer
o C ble_dis_c_init_t DIS Client initialization structure
o C ble_dis_c_s DIS Client structure
o C ble_dis_c_string_t Response data for string-based DIS characteristics
o C ble_dis_init_t Device Information Service init structure. This contains all possible characteristics needed for initialization of the service
o C ble_dis_pnp_id_t PnP ID parameters
o C ble_dis_reg_cert_data_list_t IEEE 11073-20601 Regulatory Certification Data List Structure
o C ble_dis_sys_id_t System ID parameters
o C ble_gap_dev_name_t Bluetooth Low Energy GAP device name
o C ble_gatt_db_char_t Structure for holding the characteristic and the handle of its CCCD present on a server
o C ble_gatt_db_srv_t Structure for holding information about the service and the characteristics present on a server
o C ble_gls_evt_t Glucose Service event
o C ble_gls_init_t Glucose Service init structure. This contains all options and data needed for initialization of the service
o C ble_gls_meas_context_t Glucose measurement context structure
o C ble_gls_meas_t Glucose Measurement structure. This contains glucose measurement value
o C ble_gls_rec_t Glucose measurement record
o C ble_gls_s Glucose Service structure. This contains various status information for the service
o C ble_hids_char_id_t HID Service characteristic id
o C ble_hids_client_context_t HID Host context structure. It keeps information relevant to a single host
o C ble_hids_evt_t HID Service event
o C ble_hids_feature_rep_init_t HID Service Feature Report characteristic init structure. This contains all options and data needed for initialization of one Feature Report characteristic
o C ble_hids_hid_information_t HID Information characteristic value
o C ble_hids_init_t HID Service init structure. This contains all options and data needed for initialization of the service
o C ble_hids_inp_rep_init_t HID Service Input Report characteristic init structure. This contains all options and data needed for initialization of one Input Report characteristic
o C ble_hids_outp_rep_init_t HID Service Output Report characteristic init structure. This contains all options and data needed for initialization of one Output Report characteristic
o C ble_hids_rep_char_t HID Report characteristic structure
o C ble_hids_rep_map_init_t HID Service Report Map characteristic init structure. This contains all options and data needed for initialization of the Report Map characteristic
o C ble_hids_s HID Service structure. This contains various status information for the service
o C ble_hrm_t Structure containing the heart rate measurement received from the peer
o C ble_hrs_c_evt_t Heart Rate Event structure
o C ble_hrs_c_init_t Heart Rate Client initialization structure
o C ble_hrs_c_s Heart Rate Client structure
o C ble_hrs_evt_t Heart Rate Service event
o C ble_hrs_init_t Heart Rate Service init structure. This contains all options and data needed for initialization of the service
o C ble_hrs_s Heart Rate Service structure. This contains various status information for the service
o C ble_hts_evt_t Health Thermometer Service event
o C ble_hts_init_t Health Thermometer Service init structure. This contains all options and data needed for initialization of the service
o C ble_hts_meas_s Health Thermometer Service measurement structure. This contains a Health Thermometer measurement
o C ble_hts_s Health Thermometer Service structure. This contains various status information for the service
o C ble_hvx_buf_t Ble_hvx_buf_t is the structure holding the state of the hvx buffering module
o C ble_hvx_t Ble_hvx_t represents one notification/indication
o C ble_ias_c_evt_t Immediate Alert Service client event
o C ble_ias_c_init_t IAS Client init structure. This contains all options and data needed for initialization of the client
o C ble_ias_c_s IAS Client structure. This contains various status information for the client
o C ble_ias_client_context_t Immediate Alert Service client context structure
o C ble_ias_evt_t Immediate Alert Service event
o C ble_ias_init_t Immediate Alert Service init structure. This contains all options and data needed for initialization of the service
o C ble_ias_s Immediate Alert Service structure. This contains various status information for the service
o C ble_ipsp_event_param_t IPSP event parameter
o C ble_ipsp_evt_t IPSP event and associated parameter type
o C ble_ipsp_handle_t IPSP handle
o C ble_ipsp_init_t IPSP initialization structure
o C ble_lbs_c_evt_t LED Button Event structure
o C ble_lbs_c_init_t LED Button Client initialization structure
o C ble_lbs_c_s LED Button Client structure
o C ble_lbs_init_t LED Button Service init structure. This structure contains all options and data needed for initialization of the service
o C ble_lbs_s LED Button Service structure. This structure contains various status information for the service
o C ble_lls_evt_t Link Loss Service event
o C ble_lls_init_t Link Loss Service init structure. This contains all options and data needed for initialization of the service
o C ble_lls_s Link Loss Service structure. This contains various status information for the service
o C ble_lncp_evt_t
o C ble_lncp_init_t
o C ble_lncp_mask_t A mask can be used to temporarily enable and disable features of the Location and Speed characteristic
o C ble_lncp_rsp_t Information included in a control point write response indication
o C ble_lncp_s
o C ble_lns_evt_t Location and Navigation event structure. When an event occurs, the data structures of the module are automatically updated
o C ble_lns_init_s Location and Navigation Service init structure. This structure contains all options and data needed to initialize the service
o C ble_lns_loc_speed_s Location and Speed data structure
o C ble_lns_navigation_s Navigation data structure
o C ble_lns_pos_quality_s Position quality structure
o C ble_lns_route_t Definition of a navigation route
o C ble_lns_s Location and Navigation Service structure. This structure contains various status information for the service
o C ble_nus_c_evt_t Structure containing the NUS event data received from the peer
o C ble_nus_c_handles_t Handles on the connected peer device needed to interact with it
o C ble_nus_c_init_t NUS Client initialization structure
o C ble_nus_c_s NUS Client structure
o C ble_nus_client_context_t Nordic UART Service client context structure
o C ble_nus_evt_rx_data_t Nordic UART Service BLE_NUS_EVT_RX_DATA event data
o C ble_nus_evt_t Nordic UART Service event structure
o C ble_nus_init_t Nordic UART Service initialization structure
o C ble_nus_s Nordic UART Service structure
o C ble_ots_evt_t This structure represents the state of the Object Transfer Service
o C ble_ots_init_t Structure for initializing the OTS
o C ble_ots_l2cap_evt_t L2cap event
o C ble_ots_l2cap_init_t The initialization structure of the l2cap module
o C ble_ots_l2cap_s The structure holding the l2cap connection oriented channels state
o C ble_ots_oacp_evt_t Definition of an OACP event
o C ble_ots_oacp_init_t OACP initialization properties
o C ble_ots_oacp_proc_t
o C ble_ots_oacp_s
o C ble_ots_obj_properties_t Properties of an Object Transfer Service object
o C ble_ots_obj_type_t A structure representing the object type
o C ble_ots_object_chars_init_t Initialization properties of the Object Transfer Service Object characteristics
o C ble_ots_object_chars_t The structure holding the state of the OTS object characteristics
o C ble_ots_object_evt_t The definition of an event from the object characteristics
o C ble_ots_object_t The structure representing one Object Transfer Service object
o C ble_ots_s
o C ble_racp_value_t Record Access Control Point value structure
o C ble_rsc_t Structure containing the Running Speed and Cadence measurement received from the peer
o C ble_rscs_c_db_t Structure containing the handles related to the Running Speed and Cadence Service found on the peer
o C ble_rscs_c_evt_t Running Speed and Cadence Event structure
o C ble_rscs_c_init_t Running Speed and Cadence client initialization structure
o C ble_rscs_c_s Running Speed and Cadence client structure
o C ble_rscs_evt_t Running Speed and Cadence Service event
o C ble_rscs_init_t Running Speed and Cadence Service init structure. This contains all options and data needed for initialization of the service
o C ble_rscs_meas_s Running Speed and Cadence Service measurement structure. This contains a Running Speed and Cadence measurement
o C ble_rscs_s Running Speed and Cadence Service structure. This contains various status information for the service
o C ble_sc_ctrlpt_evt_t Speed and Cadence Control point event
o C ble_sc_ctrlpt_resp_t Speed and Cadence Control Point response indication structure
o C ble_sc_ctrlpt_rsp_t
o C ble_sc_ctrlpt_s Speed and Cadence Control Point structure. This contains various status information for the Speed and Cadence Control Point behavior
o C ble_sc_ctrlpt_val_t
o C ble_socp_rsp_t Specific Operation Control Point response structure
o C ble_srv_cccd_security_mode_t Security settings structure
o C ble_srv_report_ref_t Value of a Report Reference descriptor
o C ble_srv_security_mode_t Security settings structure
o C ble_srv_utf8_str_t UTF-8 string data type
o C ble_tps_init_t TX Power Service init structure. This contains all options and data needed for initialization of the service
o C ble_tps_t TX Power Service structure. This contains various status information for the service
o C bsp_button_event_cfg_t
o C ccs811_alg_data_t Structure for holding algorithm data
o C ccs811_instance_t Structure holding sensor instance
o C cdc_rx_buffer_t CDC ACM rx transfer buffer
o C cli_libuarte_config_t
o C cli_libuarte_internal_cb_t
o C cli_libuarte_internal_s
o C coap_block_opt_block1_t
o C coap_message_conf_t Structure to hold a CoAP message configuration
o C coap_message_header_t Structure to hold a CoAP message header
o C coap_message_t Structure to hold a CoAP message
o C coap_observable_t Struct for CoAP Client for holding an instance of a remote observable resource
o C coap_observer_t Struct for CoAP Server for holding an instance of a remote observer
o C coap_option_t Structure to hold a CoAP option
o C coap_port_t Port identification information
o C coap_remote_t Remote endpoint
o C coap_resource_t Structure to hold a CoAP endpoint resource
o C coap_transport_init_t Transport initialization information
o C commissioning_evt_t Structure of events passed by the Commissioning module to the parent layer
o C commissioning_init_params_t Structure for initialization parameters of the Commissioning module
o C commissioning_timer_t Structure for creating timers in the Commissioning module
o C CONCAT_2 Declare Core instance type
o C config_medium_params_t Parameters passed for the MEDIUM_INIT_PARAMS option
o C CRYS_AESCCM_UserContext_t
o C CRYS_CHACHAUserContext_t
o C CRYS_DH_ExpTemp_t
o C CRYS_DH_FipsKat_t
o C CRYS_DH_HybrTemp_t
o C CRYS_DH_Temp_t
o C CRYS_DHKG_CheckTemp_t
o C CRYS_DHKGData_t
o C CRYS_ECDH_TempData_t
o C CRYS_ECDHFipsKatContext_t
o C CRYS_ECDSA_SignUserContext_t
o C CRYS_ECDSA_VerifyUserContext_t
o C CRYS_ECDSAFipsKatContext_t
o C CRYS_ECEDW_TempBuff_t
o C CRYS_ECIES_TempData_t
o C CRYS_ECMONT_ScalrMultTempBuff_t
o C CRYS_ECMONT_TempBuff_t
o C CRYS_ECPKI_BUILD_TempData_t
o C CRYS_ECPKI_Domain_t
o C CRYS_ECPKI_KG_FipsContext_t
o C CRYS_ECPKI_KG_TempData_t
o C CRYS_ECPKI_PointAffine_t
o C CRYS_ECPKI_PrivKey_t
o C CRYS_ECPKI_PublKey_t
o C CRYS_ECPKI_UserPrivKey_t
o C CRYS_ECPKI_UserPublKey_t
o C CRYS_HASHUserContext_t
o C CRYS_HMACUserContext_t
o C CRYS_KDF_OtherInfo_t
o C CRYS_PrngFipsKatCtx_t
o C CRYS_RND_State_t
o C CRYS_RND_WorkBuff_t
o C CRYS_RSAFipsKatContext_t
o C CRYS_RSAKGData_t
o C CRYS_RSAKGFipsContext_t
o C CRYS_RSAPrimeData_t
o C CRYS_RSAPrivUserContext_t
o C CRYS_RSAPubUserContext_t
o C CRYS_RSAUserPrivKey_t
o C CRYS_RSAUserPubKey_t
o C CRYS_SRP_Context_t
o C CRYS_SRP_GroupParam_t
o C CRYSRSAPrivCRTKey_t
o C CRYSRSAPrivKey_t
o C CRYSRSAPrivNonCRTKey_t
o C CRYSRSAPubKey_t
o C current_time_char_t Data structure for the Current Time Characteristic
o C day_date_time_t "Day Date Time" field of the "Exact Time 256" field of the Current Time Characteristic
o C dfu_command_t
o C dfu_hash_t
o C dfu_init_command_t
o C dfu_packet_t
o C dfu_progress_t
o C dfu_signed_command_t
o C dns6_init_t Initialization parameters type
o C dns6_server_param_t DNS Server parameter
o C drv_rtc_config_t RTC driver instance configuration structure
o C drv_rtc_t RTC driver instance structure
o C ECDSA_SignContext_t
o C ECDSA_VerifyContext_t
o C error_info_t Structure containing info about an error of the type NRF_FAULT_ID_SDK_ERROR
o C es_adv_frame_t Advertisable frame types that can be passed in to the advertising data during non-connectable slot advertising
o C es_adv_timing_evt_t Eddystone advertisement timing event
o C es_adv_timing_resolver_adv_timing_t Timing parameters for a single slot
o C es_adv_timing_resolver_input_t Input to the timing resolver
o C es_adv_timing_resolver_result_t Results of calculating advertisement delays
o C es_eid_config_t EID configuration
o C es_eid_frame_t EID frame data representation
o C es_etlm_frame_t ETLM frame data representation
o C es_flash_beacon_config_t Beacon configuration
o C es_flash_flags_t Structure for keeping track of which slot has a configuration that must be restored upon reboot
o C es_slot_reg_t Slot registry
o C es_slot_t Slot
o C es_tlm_frame_t TLM frame data representation
o C es_uid_frame_t UID frame data representation
o C es_url_frame_t URL frame data representation
o C eui48_t EUI-48 value type
o C eui64_t
o C exact_time_256_t "Exact Time 256" field of the Current Time Characteristic
o C fds_evt_t An FDS event
o C fds_find_token_t A token to keep information about the progress of fds_record_find , fds_record_find_by_key , and fds_record_find_in_file
o C fds_flash_record_t Structure that can be used to read the contents of a record stored in flash
o C fds_gc_data_t
o C fds_header_t The record metadata as stored in flash
o C fds_op_t
o C fds_page_t
o C fds_record_desc_t The record descriptor structure that is used to manipulate records
o C fds_record_t A record to be written to flash
o C fds_reserve_token_t A token to a reserved space in flash, created by fds_reserve
o C fds_stat_t File system statistics
o C fds_swap_page_t
o C FONT_CHAR_INFO Font char information
o C FONT_INFO Font descriptor
o C hal_exceptions_dump_t This structure is put into dump monitor port and holds values of said registers when exception has happen
o C hal_exceptions_status_registers_t This structure holds values of fault status registers
o C hal_uart_config_t HAL UART configuration structure
o C hal_uart_descriptor_t This structure defines the UART module operation
o C HardFault_stack Contents of the stack
o C hci_slip_evt_t Structure containing an event from the SLIP layer
o C hci_transport_evt_t Struct containing events from the Transport layer
o C hci_transport_ioctl_cmd_t
o C hrs_db_t Structure containing the handles related to the Heart Rate Service found on the peer
o C hts221_calib_t Structure holding calibration information
o C hts221_instance_t Structure holding sensor instance
o C icmp6_error_message_param_t Parameters associated with error message in receive and transmit paths
o C icmp6_header_t
o C icmp6_ns_param_t
o C ieee_float16_t SFLOAT format (IEEE-11073 16-bit FLOAT, defined as a 16-bit vlue with 12-bit mantissa and 4-bit exponent
o C ieee_float32_t FLOAT format (IEEE-11073 32-bit FLOAT, defined as a 32-bit value with a 24-bit mantissa and an 8-bit exponent
o C ifx_i2c_context IFX I2C context structure
o C ifx_i2c_dl Datalink layer structure
o C ifx_i2c_pl Physical layer structure
o C ifx_i2c_tl Transport layer structure
o C in6_addr IPv6 address
o C in_addr IPv4 address structure
o C iot_context_id_t Context identifiers used in stateful compression
o C iot_context_t Context structure used for efficient compression and decompression
o C iot_file_struct_t Generic IoT File instance structure
o C iot_interface_t Encapsulates all information of the 6LoWPAN interface
o C iot_pbuffer_alloc_param_t Parameters required to allocate the packet buffer
o C iot_pbuffer_t Packet buffer used for exchanging IPv6 payload across layers in both receive and transmit paths
o C iot_tftp_evt_data_received_t TFTP data received event structure
o C iot_tftp_evt_err_t TFTP error event structure
o C iot_tftp_evt_param_t TFTP event structure
o C iot_tftp_evt_t Asynchronous event type
o C iot_tftp_init_t TFTP initialization structure
o C iot_tftp_trans_params_t TFTP Transmission initialization structure (both GET and PUT)
o C iot_timer_client_t IoT Timer client structure
o C iot_timer_clients_list_t IoT Timer client list structure
o C ipso_accelerometer_t
o C ipso_actuation_t
o C ipso_analog_input_t
o C ipso_analog_output_t
o C ipso_barometer_t
o C ipso_digital_input_t
o C ipso_digital_output_t
o C ipso_generic_sensor_t
o C ipso_humidity_t
o C ipso_illuminance_t
o C ipso_light_control_t
o C ipso_load_control_t
o C ipso_magnetometer_t
o C ipso_power_control_t
o C ipso_power_measurement_t
o C ipso_presence_t
o C ipso_set_point_t
o C ipso_temperature_t
o C ipv6_addr_conf_t IPv6 address configuration
o C ipv6_addr_t
o C ipv6_data_rx_t Event parameters associated with the IPV6_EVT_INTERFACE_RX_DATA event
o C ipv6_event_param_t Asynchronous event parameter type
o C ipv6_event_t Asynchronous event type
o C ipv6_header_t
o C ipv6_init_t Initialization parameters type
o C ipv6_medium_ble_adv_params_t Structure for storing all advertisement parameters
o C ipv6_medium_ble_cb_params_t Structure of BLE-specific parameters of events passed to the parent layer by the IPv6 medium
o C ipv6_medium_ble_error_params_t Structure of BLE-specific parameters of errors passed to the parent layer by the IPv6 medium
o C ipv6_medium_ble_gap_params_t Structure for storing all GAP parameters
o C ipv6_medium_error_t Type of IPv6 medium error parameters
o C ipv6_medium_evt_t Type of IPv6 medium event parameters
o C ipv6_medium_init_params_t Structure for initialization parameters of the IPv6 medium
o C ipv6_medium_instance_t IPv6 medium instance type
o C lbs_db_t Structure containing the handles related to the LED Button Service found on the peer
o C lcd_cb_t LCD instance control block
o C led_sb_init_params_t Structure holding the initialization parameters
o C lis2dh12_data_t Structure containing accelerometer data
o C lis2dh12_instance_t Structure holding sensor instance
o C low_power_pwm_config_t Structure holding the initialization parameters
o C lps22hb_data_t Pressure and temperature output data
o C lps22hb_instance_t Structure holding sensor instance
o C lps22hb_raw_data_t Raw pressure and temperature data
o C lwm2m_acl_t
o C lwm2m_client_identity_t LWM2M client identity structure type
o C lwm2m_connectivity_monitoring_t
o C lwm2m_connectivity_statistics_t
o C lwm2m_device_t
o C lwm2m_firmware_t
o C lwm2m_identity_string_t LWM2M identity string
o C lwm2m_instance_prototype_t LWM2M instance structure
o C lwm2m_location_t
o C lwm2m_object_prototype_t LWM2M object prototype structure
o C lwm2m_opaque_t LWM2M opaque type
o C lwm2m_security_t
o C lwm2m_server_config_t LWM2M server configuration type
o C lwm2m_server_t
o C lwm2m_software_update_t
o C lwm2m_string_t LWM2M string type
o C mac_abstract_req_t MAC request descriptor
o C mac_addr_t MAC ADDRESS
o C mac_capability_t Capability information field
o C mac_device_descr_t DeviceDescriptor as described in Table 93
o C mac_gts_characteristics_t MAC GTS characteristics (not packed)
o C mac_key_descr_t KeyDescriptor as described in Table 89
o C mac_key_device_descr_t KeyDeviceDescriptor as described in Table 91
o C mac_key_id_lookup_descr_t KeyIdLookupDescriptor as described in Table 94
o C mac_key_usage_descr_t KeyUsageDescriptor as described in Table 90
o C mac_pan_descriptor_t PAN Descriptor structure
o C mac_payload_descriptor_t Payload descriptor
o C mac_pend_addr_spec_t Pending Address Specification
o C mac_pending_addr_list_t List of pending addresses Short addresses are at the top of the table
o C mac_scheduler_mem_t Scheduler memory
o C mac_security_level_descr_t SecurityLevelDescriptor as described in Table 93
o C mac_superframe_spec_t Superframe specification structure
o C mac_table_item_t Due to processing algorithm this field MUST be the first inside a table or list
o C mac_table_t Abstract type to work with growing tables such as some of MAC security attributes
o C mac_tx_options_t TX options for MAC data transmission
o C max9850_config_t MAX9850 configuration
o C max9850_regmap_t Internal MAX9850 register map
o C mbuf_t Memory management structure
o C mcp4725_pins_config_t
o C mcps_data_conf_t MCPS-DATA.confirm
o C mcps_data_ind_private_t Private information passed with MCPS-DATA.indication. Not covered by the standard
o C mcps_data_ind_t MCPS-DATA.indication
o C mcps_data_req_t MCPS-DATA.request
o C mcps_purge_conf_t MCPS-PURGE.confirm
o C mcps_purge_req_t MCPS-PURGE.request
o C mlme_beacon_notify_ind_t MLME-BEACON-NOTIFY.indication parameters
o C mlme_comm_status_ind_t MLME-COMM-STATUS.indication
o C mlme_disassociate_conf_t MLME-DISASSOCIATE.confirm
o C mlme_disassociate_ind_t MLME-DISASSOCIATE.indication
o C mlme_disassociate_req_t MLME-DISASSOCIATE.request
o C mlme_get_conf_t MLME-GET.confirm
o C mlme_get_req_t MLME-GET.request
o C mlme_gts_conf_t MLME-GTS.confirm
o C mlme_gts_ind_t MLME-GTS.indication
o C mlme_gts_req_t MLME-GTS.request
o C mlme_orphan_ind_t MLME-ORPHAN.indication
o C mlme_orphan_resp_t MLME-ORPHAN.response
o C mlme_poll_conf_t MLME-POLL.confirm
o C mlme_poll_ind_t MLME-Poll.indication
o C mlme_poll_req_t MLME-POLL.request
o C mlme_reset_conf_t MLME-Reset.confirm
o C mlme_reset_req_t MLME-RESET.request
o C mlme_rx_enable_conf_t MLME-RX-ENABLE.confirm
o C mlme_rx_enable_req_t MLME-RX-ENABLE.request
o C mlme_scan_conf_t MLME-SCAN.confirm
o C mlme_scan_req_t MLME-SCAN.request
o C mlme_set_conf_t MLME-SET.confirm
o C mlme_set_req_t MLME-SET.request
o C mlme_start_conf_t MLME-Start.confirm
o C mlme_start_req_t MLME-START.request
o C mlme_sync_loss_ind_t MLME-SYNC-LOSS.indication
o C mqtt_binstr_t Abstracts binary strings
o C mqtt_client_t MQTT Client definition to maintain information relevant to the client
o C mqtt_connack_param_t Parameters for a connection acknowledgment (connack)
o C mqtt_evt_param_t Defines event parameters notified along with asynchronous events to the application. Currently, only MQTT_EVT_PUBLISH is accompanied with parameters
o C mqtt_evt_t Defined MQTT asynchronous event notified to the application
o C mqtt_puback_param_t Parameters for MQTT publish acknowledgment(puback)
o C mqtt_pubcomp_param_t Parameters for MQTT publish complete(pubcomp)
o C mqtt_publish_message_t Parameters for a publish message
o C mqtt_publish_param_t Parameters for a publish message
o C mqtt_pubrec_param_t Parameters for MQTT publish receive(pubrec)
o C mqtt_pubrel_param_t Parameters for MQTT publish release(pubrec)
o C mqtt_suback_param_t Parameters for MQTT subscription acknowledgment (suback)
o C mqtt_subscription_list_t List of topics in a subscription request
o C mqtt_topic_t Abstracts MQTT UTF-8 encoded topic that can be subscribed to or published
o C mqtt_unsuback_param_t Parameters for MQTT unsubscription acknowledgment (unsuback)
o C mqtt_utf8_t Abstracts UTF-8 encoded strings
o C nfc_a_tag_info Basic information about detected NFC-A tag
o C nfc_ac_rec_data_ref_t Carrier Data Reference and Auxiliary Data Reference descriptor
o C nfc_ac_rec_payload_desc_t Alternative Carrier record payload descriptor
o C nfc_ble_oob_pairing_data_t BLE Advertising data that is relevant for OOB pairing
o C nfc_hs_rec_payload_desc_t Handover Select record payload descriptor
o C nfc_ndef_bin_payload_desc_t Binary data descriptor containing the payload for the record
o C nfc_ndef_msg_desc_t NDEF message descriptor
o C nfc_ndef_parser_memo_desc_t Type for holding descriptors that are used by the NDEF parser
o C nfc_ndef_record_desc_t NDEF record descriptor
o C nfc_t4t_apdu_data_t APDU data field descriptor
o C nfc_t4t_capability_container_t Descriptor for the Capability Container (CC) file of Type 4 Tag
o C nfc_t4t_comm_apdu_t Command Application Protocol Data Unit (C-APDU) descriptor
o C nfc_t4t_file_control_val_t Extended NDEF/NDEF/Proprietary File Control Value descriptor
o C nfc_t4t_file_t File content descriptor
o C nfc_t4t_resp_apdu_t Response Application Protocol Data Unit (R-APDU) descriptor
o C nfc_t4t_tlv_block_t File Control TLV block descriptor
o C nfc_text_rec_payload_desc_t Text record payload descriptor
o C notification_t
o C nrf_adc_config_t Analog-to-digital converter configuration
o C nrf_atfifo_item_put_s FIFO write operation item context
o C nrf_atfifo_postag_pos_s Read and write position structure
o C nrf_atfifo_postag_u End data index tag
o C nrf_atfifo_rcontext_s FIFO read operation item context
o C nrf_atfifo_s The FIFO instance
o C nrf_balloc_cb_t Block memory allocator control block
o C nrf_balloc_t Block memory allocator pool instance. The pool is made of elements of the same size
o C nrf_ble_bms_auth_code_t Received authorization codes
o C nrf_ble_bms_bond_cbs_t BMS bond management callbacks
o C nrf_ble_bms_ctrlpt_t BMS control points
o C nrf_ble_bms_evt_t BMS events
o C nrf_ble_bms_features_t Supported features
o C nrf_ble_bms_init_t BMS initialization structure that contains all information needed to initialize the service
o C nrf_ble_bms_s Status information for the service
o C nrf_ble_cgm_status_t Status of the CGM measurement
o C nrf_ble_cgms_calib_t Calibration value
o C nrf_ble_cgms_char_handler_t Handles related to CGM characteristics
o C nrf_ble_cgms_evt_t CGM Service event
o C nrf_ble_cgms_feature_t Features supported by the CGM Service
o C nrf_ble_cgms_init_t CGM Service initialization structure that contains all options and data needed for initializing the service
o C nrf_ble_cgms_meas_t CGM measurement
o C nrf_ble_cgms_racp_t Record Access Control Point transaction data
o C nrf_ble_cgms_sensor_annunc_t CGM Measurement Sensor Status Annunciation
o C nrf_ble_escs_broadcast_cap_t Data fields in the Broadcast Capabilities characteristic
o C nrf_ble_escs_eid_id_key_t EID Identity Key characteristic
o C nrf_ble_escs_init_params_t Eddystone Configuration Service initialization parameters (corresponding to required characteristics)
o C nrf_ble_escs_init_t Eddystone Configuration Service initialization structure
o C nrf_ble_escs_lock_state_t Lock State characteristic
o C nrf_ble_escs_lock_state_write_t Write data fields of the Lock State characteristic
o C nrf_ble_escs_public_ecdh_key_t Public ECDH Key characteristic
o C nrf_ble_escs_remain_conntbl_t Unlock characteristic (read/write)
o C nrf_ble_escs_s
o C nrf_ble_escs_unlock_t Unlock characteristic (read/write)
o C nrf_ble_gatt_evt_t GATT module event
o C nrf_ble_gatt_link_t GATT information for each connection
o C nrf_ble_gatt_s GATT structure that contains status information for the GATT module
o C nrf_ble_gatts_c_evt_t Structure containing the event from the Service Changed client module to the application
o C nrf_ble_gatts_c_init_t Initialization parameters. These must be supplied when calling nrf_ble_gatts_c_init
o C nrf_ble_gatts_c_t Structure for holding the information related to the Service Changed indication at the server
o C nrf_ble_ots_c_evt_t Structure containing the event from the Object Transfer client module to the application
o C nrf_ble_ots_c_feature_t Structure to hold the features of a server
o C nrf_ble_ots_c_init_t Initialization parameters, these must be supplied when calling nrf_ble_ots_c_init
o C nrf_ble_ots_c_oacp_response_t
o C nrf_ble_ots_c_obj_size
o C nrf_ble_ots_c_service_t Structure used for holding the Apple Notification Center Service found during the discovery process
o C nrf_ble_ots_c_t Structure for holding the information related to the Object Transfer Service
o C nrf_ble_qwr_evt_t Queued Writes module events
o C nrf_ble_qwr_init_t Queued Writes init structure
o C nrf_ble_qwr_t Queued Writes structure
o C nrf_block_dev_empty_config_t EMPTY block device config
o C nrf_block_dev_empty_t EMPTY block device
o C nrf_block_dev_empty_work_t Work structure of EMPTY block device
o C nrf_block_dev_event_t Block device event
o C nrf_block_dev_geometry_t Block device geometry
o C nrf_block_dev_info_strings_t Block device information strings
o C nrf_block_dev_qspi_config_t QSPI block device config
o C nrf_block_dev_qspi_t QSPI block device
o C nrf_block_dev_qspi_work_t Work structure of QSPI block device
o C nrf_block_dev_ram_config_t Ram block device config
o C nrf_block_dev_ram_t Ram block device
o C nrf_block_dev_ram_work_t Work structure of RAM block device
o C nrf_block_dev_s Block device API
| \ C nrf_block_dev_ops_s
o C nrf_block_dev_sdc_config_t SDC block device config
o C nrf_block_dev_sdc_t SDC block device
o C nrf_block_dev_sdc_work_t Work structure of SDC block device
o C nrf_block_req_t Block device request descriptor item
o C nrf_cli CLI instance internals
o C nrf_cli_ble_uart_config_t
o C nrf_cli_ble_uart_internal_cb_t
o C nrf_cli_ble_uart_internal_s
o C nrf_cli_cdc_acm_internal_cb_t
o C nrf_cli_cdc_acm_internal_t
o C nrf_cli_cmd_entry CLI command descriptor
o C nrf_cli_ctx_t CLI instance context
o C nrf_cli_flag_t
o C nrf_cli_getopt_option Option descriptor
o C nrf_cli_internal_t
o C nrf_cli_log_backend_t
o C nrf_cli_multiline_cons_t
o C nrf_cli_rtt_internal_cb_t CLI RTT transport control block structure
o C nrf_cli_rtt_internal_t CLI RTT transport instance structure
o C nrf_cli_static_entry CLI static command descriptor
o C nrf_cli_transport_api_t Unified CLI transport interface
o C nrf_cli_transport_s
o C nrf_cli_uart_internal_cb_t
o C nrf_cli_uart_internal_s
o C nrf_cli_vt100_colors_t
o C nrf_cli_vt100_ctx_t
o C nrf_comp_ref_conf_t COMP reference configuration
o C nrf_comp_th_t COMP THDOWN and THUP values that are used to calculate the threshold voltages VDOWN and VUP
o C nrf_crypto_aead_info_t
o C nrf_crypto_aead_internal_context_t
o C nrf_crypto_aes_info_t
o C nrf_crypto_aes_internal_context_t
o C nrf_crypto_backend_aead_context_t
o C nrf_crypto_backend_aes_context_t
o C nrf_crypto_backend_aes_ctx_t
o C nrf_crypto_backend_hash_context_t
o C nrf_crypto_backend_hmac_context_t
o C nrf_crypto_backend_info_t
o C nrf_crypto_backend_no_iv_aes_ctx_t
o C nrf_crypto_backend_rng_temp_buffer_t
o C nrf_crypto_ecc_curve_info_s Structure holding information on a specific curve
o C nrf_crypto_ecc_key_pair_generate_context_t Union holding a context for a key pair generation
o C nrf_crypto_ecc_private_key_t Union holding representation of a private key for any curve type
o C nrf_crypto_ecc_public_key_calculate_context_t Union holding a context for a public key calculation
o C nrf_crypto_ecc_public_key_t Union holding representation of a public key for any curve type
o C nrf_crypto_ecdh_context_t Union holding a context for ECDH computation
o C nrf_crypto_ecdsa_sign_context_t Union holding a context for ECDSA hash sign
o C nrf_crypto_ecdsa_verify_context_t Union holding a context for ECDSA hash verify
o C nrf_crypto_hash_info_t
o C nrf_crypto_hash_internal_context_t
o C nrf_crypto_hmac_info_t
o C nrf_crypto_hmac_internal_context_t
o C nrf_crypto_rng_internal_context_t
o C nrf_csense_evt_param_t Event data union for nrf_csense events
o C nrf_csense_evt_t Structure with event parameters
o C nrf_csense_slider_evt_t Structure with slider event data including the measured step
o C nrf_dfu_bank_t Description of a single bank
o C nrf_dfu_request_create_t NRF_DFU_OP_OBJECT_CREATE request details
o C nrf_dfu_request_firmware_t NRF_DFU_OP_FIRMWARE_VERSION request details
o C nrf_dfu_request_mtu_t NRF_DFU_OP_MTU_GET request details
o C nrf_dfu_request_ping_t NRF_DFU_OP_PING request details
o C nrf_dfu_request_prn_t NRF_DFU_OP_RECEIPT_NOTIF_SET request details
o C nrf_dfu_request_select_t NRF_DFU_OP_OBJECT_SELECT request details
o C nrf_dfu_request_t DFU request
o C nrf_dfu_request_write_t NRF_DFU_OP_OBJECT_WRITE request details
o C nrf_dfu_response_crc_t NRF_DFU_OP_CRC_GET response details
o C nrf_dfu_response_create_t NRF_DFU_OP_OBJECT_CREATE response details
o C nrf_dfu_response_firmware_t NRF_DFU_OP_FIRMWARE_VERSION response details
o C nrf_dfu_response_hardware_t NRF_DFU_OP_HARDWARE_VERSION response details
o C nrf_dfu_response_mtu_t NRF_DFU_OP_MTU_GET response details
o C nrf_dfu_response_ping_t NRF_DFU_OP_PING response details
o C nrf_dfu_response_protocol_t NRF_DFU_OP_PROTOCOL_VERSION response details
o C nrf_dfu_response_select_t NRF_DFU_OP_OBJECT_SELECT response details
o C nrf_dfu_response_t DFU response message
o C nrf_dfu_response_write_t NRF_DFU_OP_OBJECT_WRITE response details
o C nrf_dfu_serial_t DFU serial transport layer state
o C nrf_dfu_settings_t DFU settings for application and bank data
o C nrf_dfu_transport_s DFU transport registration
o C nrf_drv_clock_handler_item_s
o C nrf_drv_csense_config_t Module initializing structure
o C nrf_drv_csense_evt_t Structure holding event parameters
o C nrf_drv_spi_config_t SPI master driver instance configuration structure
o C nrf_drv_spi_evt_t
o C nrf_drv_spi_t SPI master driver instance data structure
o C nrf_drv_spi_xfer_desc_t Single transfer descriptor structure
o C nrf_drv_twi_config_t Structure for the TWI master driver instance configuration
o C nrf_drv_twi_evt_t Structure for a TWI event
o C nrf_drv_twi_t Structure for the TWI master driver instance
o C nrf_drv_twi_xfer_desc_t Structure for a TWI transfer descriptor
o C nrf_drv_uart_config_t Structure for UART configuration
o C nrf_drv_uart_error_evt_t Structure for UART error event
o C nrf_drv_uart_event_t Structure for UART event
o C nrf_drv_uart_t Structure for the UART driver instance
o C nrf_drv_uart_xfer_evt_t Structure for UART transfer completion event
o C nrf_drv_usbd_data_ptr_t Universal data pointer
o C nrf_drv_usbd_ep_transfer_t Structure to be filled with information about the next transfer
o C nrf_drv_usbd_evt_t Event structure
o C nrf_drv_usbd_handler_desc_t USBD transfer descriptor
o C nrf_drv_usbd_handler_t Universal transfer handler
o C nrf_drv_usbd_setup_t Setup packet structure
o C nrf_drv_usbd_transfer_t Total transfer configuration
o C nrf_esb_config_t Main configuration structure for the module
o C nrf_esb_evt_t Enhanced ShockBurst event
o C nrf_esb_payload_t Enhanced ShockBurst payload
o C nrf_fifo_t FIFO data structure
o C nrf_fstorage_api_s Functions provided by the API implementation
o C nrf_fstorage_evt_t An fstorage event
o C nrf_fstorage_info_t Information about the implementation and the flash peripheral
o C nrf_fstorage_t An fstorage instance
o C nrf_gfx_circle_t GFX circle object structure
o C nrf_gfx_line_t GFX line object structure
o C nrf_gfx_point_t GFX point object structure
o C nrf_gfx_rect_t GFX rectangle object structure
o C nrf_gzll_device_tx_info_t Data structure containing information about the last packet transmission
o C nrf_gzll_host_rx_info_t Data structure containing information about the last packet received
o C nrf_gzll_pa_lna_cfg_t Data structure holding external front end control configuration
o C nrf_gzll_tx_statistics_t
o C nrf_lcd_t LCD instance type
o C nrf_libuarte_async_config_t Structure for libuarte async configuration
o C nrf_libuarte_async_data_t Structure for libuarte async transfer completion event
o C nrf_libuarte_async_evt_t Structure for libuarte error event
o C nrf_libuarte_config_t
o C nrf_libuarte_data_t
o C nrf_libuarte_evt_t
o C nrf_log_backend_api_t Logger backend API
o C nrf_log_backend_crashlog_t Crashlog logger backend structure
o C nrf_log_backend_flashlog_t Flashlog logger backend structure
o C nrf_log_backend_rtt_t
o C nrf_log_backend_s Logger backend structure
o C nrf_log_backend_uart_t
o C nrf_log_generic_header_t
o C nrf_log_header_t
o C nrf_log_hexdump_header_t
o C nrf_log_main_header_t
o C nrf_log_module_const_data_t Structure holding constant data associated with a module or instance
o C nrf_log_module_dynamic_data_t Structure holding dynamic data associated with a module or instance if filtering is enabled ( NRF_LOG_FILTERS_ENABLED )
o C nrf_log_module_reduced_dynamic_data_t Structure holding dynamic data associated with a module or instance if filtering is disabled ( NRF_LOG_FILTERS_ENABLED )
o C nrf_log_pushed_header_t
o C nrf_log_std_header_t
o C nrf_log_str_formatter_entry_params_t
o C nrf_lpcomp_config_t LPCOMP configuration
o C nrf_pwm_sequence_t Structure for defining a sequence of PWM duty cycles
o C nrf_pwm_values_grouped_t Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_GROUPED mode
o C nrf_pwm_values_individual_t Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_INDIVIDUAL mode
o C nrf_pwm_values_t Union grouping pointers to arrays of duty cycle values applicable to various loading modes
o C nrf_pwm_values_wave_form_t Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_WAVE_FORM mode
o C nrf_qspi_addrconfig_conf_t Addressing mode register configuration. See nrf_qspi_addrconfig_set
o C nrf_qspi_cinstr_conf_t Custom instruction configuration
o C nrf_qspi_phy_conf_t QSPI physical interface configuration
o C nrf_qspi_pins_t Pins configuration
o C nrf_qspi_prot_conf_t Structure with QSPI protocol interface configuration
o C nrf_queue_cb_t Queue control block
o C nrf_queue_t Instance of the queue
o C nrf_ringbuf_cb_t Ring buffer instance control block
o C nrf_ringbuf_t Ring buffer instance structure
o C nrf_saadc_channel_config_t Analog-to-digital converter channel configuration structure
o C nrf_saadc_config_t Analog-to-digital converter configuration structure
o C nrf_sdh_ant_evt_observer_t ANT event observer
o C nrf_sdh_ble_evt_observer_t BLE event observer
o C nrf_sdh_req_observer_t SoftDevice Handler state request observer
o C nrf_sdh_soc_evt_observer_t SoC event observer
o C nrf_sdh_stack_observer_t SoftDevice stack event observer
o C nrf_sdh_state_observer_t SoftDevice Handler state observer
o C nrf_section_iter_t Section iterator structure
o C nrf_section_set_t Set of the sections description structure
o C nrf_section_t Single section description structure
o C nrf_serial_buffers_t Serial buffers. Data slices used by nrf_drv_uart_tx and nrf_drv_uart_rx
o C nrf_serial_config_t Configuration of UART serial interface
o C nrf_serial_ctx_t Serial port context. Contains all data structures that need to be stored in RAM memory
o C nrf_serial_flash_params_t Serial flash memory parameters
o C nrf_serial_queues_t Serial port RX and TX queues
o C nrf_serial_s Serial port instance declaration
o C nrf_sortlist_cb_t Sorted list instance control block
o C nrf_sortlist_item_s A structure for item in the sorted list
o C nrf_sortlist_t Structure for sorted list instance
o C nrf_spi_mngr_cb_t SPI instance control block
o C nrf_spi_mngr_t SPI transaction manager instance
o C nrf_spi_mngr_transaction_t SPI transaction descriptor
o C nrf_spi_mngr_transfer_t SPI transfer descriptor
o C nrf_svc_func_reg_t Type holding the SVC number, SVCI number, and the pointer to the corresponding handler function
o C nrf_tls_certificate_t Certificate to be used when using certificates for key derivation
o C nrf_tls_instance_t TLS Instance identifier
o C nrf_tls_key_settings_t Key settings to be used for TLS instance
o C nrf_tls_options_t Options when requesting an TLS instance
o C nrf_tls_preshared_key_t Information needed when using Pre-shared key ciphers
o C nrf_tls_raw_key_t Information provided when using Raw Public key ciphers
o C nrf_twi_mngr_cb_t TWI instance control block
o C nrf_twi_mngr_t TWI transaction manager instance
o C nrf_twi_mngr_transaction_t TWI transaction descriptor
o C nrf_twi_mngr_transfer_t TWI transfer descriptor
o C nrf_twi_sensor_cmd_t Union for sensor commands. Needed in buffer definition
o C nrf_twi_sensor_read_cmd_t Struct describing sensor read command
o C nrf_twi_sensor_t Structure holding sensor instance
o C nrf_twi_sensor_write_cmd_t Struct describing sensor write command
o C nrfx_adc_channel_s ADC channel
o C nrfx_adc_config_t ADC configuration
o C nrfx_adc_done_evt_t Analog-to-digital converter driver DONE event
o C nrfx_adc_evt_t Analog-to-digital converter driver event
o C nrfx_adc_sample_evt_t Analog-to-digital converter driver SAMPLE event
o C nrfx_comp_config_t COMP configuration
o C nrfx_gpiote_in_config_t Input pin configuration
o C nrfx_gpiote_out_config_t Output pin configuration
o C nrfx_i2s_buffers_t I2S driver buffers structure
o C nrfx_i2s_config_t I2S driver configuration structure
o C nrfx_lpcomp_config_t LPCOMP configuration
o C nrfx_pdm_config_t PDM interface driver configuration structure
o C nrfx_pdm_evt_t PDM event structure
o C nrfx_power_config_t General power configuration
o C nrfx_power_pofwarn_config_t The configuration for power failure comparator
o C nrfx_power_sleepevt_config_t The configuration of sleep event processing
o C nrfx_power_usbevt_config_t The configuration of USB related power events
o C nrfx_pwm_config_t PWM driver configuration structure
o C nrfx_pwm_t PWM driver instance data structure
o C nrfx_qdec_config_t QDEC configuration structure
o C nrfx_qdec_event_t QDEC event handler structure
o C nrfx_qdec_report_data_evt_t QDEC report event data
o C nrfx_qdec_sample_data_evt_t QDEC sample event data
o C nrfx_qspi_config_t QSPI driver instance configuration structure
o C nrfx_rng_config_t Struct for RNG configuration
o C nrfx_rtc_config_t RTC driver instance configuration structure
o C nrfx_rtc_t RTC driver instance structure
o C nrfx_saadc_config_t Analog-to-digital converter driver configuration structure
o C nrfx_saadc_done_evt_t Analog-to-digital converter driver done event data
o C nrfx_saadc_evt_t Analog-to-digital converter driver event structure
o C nrfx_saadc_limit_evt_t Analog-to-digital converter driver limit event data
o C nrfx_spi_config_t SPI master driver instance configuration structure
o C nrfx_spi_evt_t
o C nrfx_spi_t SPI master driver instance data structure
o C nrfx_spi_xfer_desc_t Single transfer descriptor structure
o C nrfx_spim_config_t SPIM master driver instance configuration structure
o C nrfx_spim_evt_t
o C nrfx_spim_t SPIM master driver instance data structure
o C nrfx_spim_xfer_desc_t Single transfer descriptor structure
o C nrfx_spis_config_t SPI peripheral device configuration data
o C nrfx_spis_evt_t SPI slave driver event structure
o C nrfx_spis_t SPI slave driver instance data structure
o C nrfx_systick_state_t The value type that holds the SysTick state
o C nrfx_timer_config_t Timer driver instance configuration structure
o C nrfx_timer_t Timer driver instance data structure
o C nrfx_twi_config_t Structure for the TWI master driver instance configuration
o C nrfx_twi_evt_t Structure for a TWI event
o C nrfx_twi_t Structure for the TWI master driver instance
o C nrfx_twi_xfer_desc_t Structure for a TWI transfer descriptor
o C nrfx_twim_config_t Structure for the TWI master driver instance configuration
o C nrfx_twim_evt_t Structure for a TWI event
o C nrfx_twim_t Structure for the TWI master driver instance
o C nrfx_twim_xfer_desc_t Structure for a TWI transfer descriptor
o C nrfx_twis_config_t Structure for TWIS configuration
o C nrfx_twis_evt_t TWIS driver event structure
o C nrfx_twis_t TWIS driver instance data structure
o C nrfx_uart_config_t Structure for UART configuration
o C nrfx_uart_error_evt_t Structure for UART error event
o C nrfx_uart_event_t Structure for UART event
o C nrfx_uart_t UART driver instance data structure
o C nrfx_uart_xfer_evt_t Structure for UART transfer completion event
o C nrfx_uarte_config_t Structure for UARTE configuration
o C nrfx_uarte_error_evt_t Structure for UARTE error event
o C nrfx_uarte_event_t Structure for UARTE event
o C nrfx_uarte_t Structure for the UARTE driver instance
o C nrfx_uarte_xfer_evt_t Structure for UARTE transfer completion event
o C nrfx_wdt_config_t Struct for WDT initialization
o C optiga_comms Optiga comms structure
o C pal_gpio Structure defines the PAL GPIO configuration
o C pal_i2c PAL I2C context structure
o C pal_socket This structure contains socket communication data
o C parsed_ndef_msg_1_t Memory allocated for a one-record message
o C parsed_ndef_msg_2_t Memory allocated for a two-record message
o C pd_data_conf_private_t Private information which is passed with PD-DATA.confirm. Not covered by standard
o C pd_data_conf_t PD-DATA.confirm parameters
o C pd_data_ind_private_t Private information which is passed with PD-DATA.indication. Not covered by standard
o C pd_data_ind_t PD-DATA.indication parameters
o C pd_data_req_t PD-DATA.request parameters
o C phy_pib_item_t PHY PIB attribute type sizes
o C phy_plme_ed_mem_t This structure holds static data of this module
o C pib_id_t United PIB attribute identifiers
o C plme_cca_conf_t PLME-CCA.confirm parameters
o C plme_ed_conf_t PLME-ED.confirm parameters
o C plme_get_conf_t PLME-GET.confirm parameters
o C plme_get_req_t PLME-GET.request parameters
o C plme_set_conf_t PLME-SET.confirm parameters
o C plme_set_req_t PLME-SET.request parameters
o C plme_trx_conf_t PLME-TRX.confirm parameters
o C plme_trx_req_t PLME-SET_TRX_STATE.request parameters
o C pm_conn_sec_config_t Configuration of a security procedure
o C pm_conn_sec_params_req_evt_t Parameters specific to the PM_EVT_CONN_SEC_PARAMS_REQ event
o C pm_conn_sec_start_evt_t Events parameters specific to the PM_EVT_CONN_SEC_START event
o C pm_conn_sec_status_t Security status of a connection
o C pm_conn_secure_failed_evt_t Parameters specific to the PM_EVT_CONN_SEC_FAILED event
o C pm_conn_secured_evt_t Parameters specific to the PM_EVT_CONN_SEC_SUCCEEDED event
o C pm_evt_slave_security_req_t Events parameters specific to the PM_EVT_SLAVE_SECURITY_REQ event
o C pm_evt_t An event from the Peer Manager module
o C pm_failure_evt_t Standard parameters for failure events
o C pm_peer_data_bonding_t Data associated with a bond to a peer
o C pm_peer_data_local_gatt_db_t Data on a local GATT database
o C pm_peer_data_update_failed_t Parameters specific to the PM_EVT_PEER_DATA_UPDATE_FAILED event
o C pm_peer_data_update_succeeded_evt_t Parameters specific to the PM_EVT_PEER_DATA_UPDATE_SUCCEEDED event
o C ral_mem_t
o C regcertdatalist_t IEEE 11073-20601 Regulatory Certification Data List Structure
o C RSAPrivContext_t
o C RSAPubContext_t
o C SaSi_PalDmaBlockInfo_t
o C SaSi_PalListItem
o C SaSiAesHwKeyData_t
o C SaSiAesUserContext_t
o C SaSiAesUserKeyData_t
o C sbBlob_d Structure to specify a byte stream consisting of length and data pointer
o C sdc_evt_t SDC event structure
o C sdc_type_t SDC type information structure
o C sdk_mapped_flags_key_list_t Type used to present a subset of the registered keys
o C sec_aes_ccm_req_t AES CCM request
o C sensorsim_cfg_t Triangular waveform sensor simulator configuration
o C sensorsim_state_t Triangular waveform sensor simulator state
o C ser_ble_gap_app_keyset_t GAP connection - keyset mapping structure
o C ser_ble_gap_conn_keyset_t GAP connection - keyset mapping structure
o C ser_ble_user_mem_t Connection - user memory mapping structure
o C ser_hal_transport_evt_phy_error_params_t Struct containing parameters of event of type SER_HAL_TRANSP_EVT_PHY_ERROR
o C ser_hal_transport_evt_rx_pkt_received_params_t Struct containing parameters of event of type SER_HAL_TRANSP_EVT_RX_PKT_RECEIVED
o C ser_hal_transport_evt_t Struct containing events from the Serialization HAL Transport layer
o C ser_phy_evt_hw_error_params_t A struct containing parameters of event of type SER_PHY_EVT_HW_ERROR
o C ser_phy_evt_rx_buf_request_params_t A struct containing parameters of event of type SER_PHY_EVT_RX_BUF_REQUEST
o C ser_phy_evt_rx_pkt_received_params_t A struct containing parameters of event of type SER_PHY_EVT_RX_PKT_RECEIVED
o C ser_phy_evt_t A struct containing events from a Serialization PHY module
o C ser_phy_hci_evt_hw_error_params_t Struct containing parameters of event of type SER_PHY_HCI_SLIP_EVT_HW_ERROR
o C ser_phy_hci_pkt_params_t Struct representing a PHY HCI packet
o C ser_phy_hci_slip_evt_t Struct containing events from the Serialization PHY module
o C sercon_ble_user_mem_t Connection - user memory mapping structure
o C sfloat_t SFLOAT format (IEEE-11073 16-bit FLOAT, meaning 4 bits for exponent (base 10) and 12 bits mantissa)
o C sha256_context_t Current state of a hash operation
o C slip_t Representation of a SLIP packet
o C sntp_client_cb_param_t SNTP client callback parameter
o C sntp_client_init_param_t SNTP client initialization structure
o C sockaddr Generic socket address
o C sockaddr_in Address record for IPv4 addresses
o C sockaddr_in6 Address record for IPv6 addresses
o C socket_params_t Create parameters for a socket
o C socket_t The state associated with a socket handle
o C socket_transport The transport interface
o C spi_master_config_t Struct containing configuration parameters of the SPI master
o C spi_master_evt_t Struct containing parameters of the SPI MASTER event
o C SW_Shared_CRYS_RSAPrimeData_t
o C sx1509b_instance_t Structure containing expander instance
o C sys_event_desc_t Event descriptor
o C sys_fsm_const_descriptor_t Constant FSM descriptor which can reside in read-only memory
o C sys_fsm_t FSM dynamic descriptor, holding the current state of the FSM
o C sys_fsm_transition_t FSM transition description (item of FSM transition table)
o C sys_list_head
o C sys_queue_item_s Queue item descriptor
o C sys_ringbuffer_t
o C sys_timer_t Timer descriptor
o C timeval Structure specifying time interval
o C tlv_block_t TLV block descriptor
o C trickle_params_t Structure holds Trickle timer instance parameters
o C tx_message_t Data to be transmitted to the connected master
o C type_2_tag_capability_container_t Descriptor for the Capability Container (CC) bytes of a Type 2 Tag
o C type_2_tag_serial_number_t Descriptor for the internal bytes of a Type 2 Tag
o C type_2_tag_t Type 2 Tag descriptor
o C uda1380_iface_t UDA1380 interface
o C uda1380_reg_t UDA1380 register descriptor
o C udp6_header_t
o C udp6_socket_t UDP socket reference
o C uint8_array_t Byte array type
o C ulong_union_t Uint32_t type presentation as an union
o C uri_payload_desc_t Type of description of the payload of a URI record
o C ushort_union_t Uint16_t type presentation as an union
o C win_launchapp_payload_desc_t Type of description of payload of Windows LaunchApp record
\ C write_params_t Structure for writing a message to the central, thus the Control Point or CCCD