Connectivity command request decoders and command response encoders. More...

Functions
uint32_t	ant_enable_req_dec (uint8_t const const p_buf, uint32_t packet_len, ANT_ENABLE *const pp_ant_enable_params)
	Decodes sd_ant_enable command request. More...

uint32_t	ant_enable_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_enable command response. More...

uint32_t	ant_channel_assign_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_type, uint8_t const p_network, uint8_t *const p_ext_assign)
	Decodes sd_ant_channel_assign command request. More...

uint32_t	ant_channel_assign_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_assign command response. More...

uint32_t	ant_channel_open_with_offset_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint16_t *const p_usOffset)
	Decodes sd_ant_channel_open command request. More...

uint32_t	ant_channel_open_with_offset_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_open command response. More...

uint32_t	ant_channel_id_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint16_t const p_device_number, uint8_t const p_device_type, uint8_t *const p_transmission_type)
	Decodes sd_ant_channel_id_set command request. More...

uint32_t	ant_channel_id_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_id_set command response. More...

uint32_t	ant_channel_period_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint16_t *const p_period)
	Decodes sd_ant_channel_period_set command request. More...

uint32_t	ant_channel_period_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_period_set command response. More...

uint32_t	ant_channel_radio_freq_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const p_freq)
	Decodes sd_ant_channel_radio_freq_set command request. More...

uint32_t	ant_channel_radio_freq_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_radio_freq_set command response. More...

uint32_t	ant_broadcast_message_tx_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_size, uint8_t *const pp_mesg)
	Decodes sd_ant_broadcast_message_tx command request. More...

uint32_t	ant_broadcast_message_tx_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_broadcast_message_tx command response. More...

uint32_t	ant_acknowledge_message_tx_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_size, uint8_t *const pp_mesg)
	Decodes sd_ant_acknowledge_message_tx command request. More...

uint32_t	ant_acknowledge_message_tx_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_acknowledge_message_tx command response. More...

uint32_t	ant_channel_unassign_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_unassign command request. More...

uint32_t	ant_channel_unassign_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_unassign command response. More...

uint32_t	ant_channel_close_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_close command request. More...

uint32_t	ant_channel_close_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_close command response. More...

uint32_t	ant_network_address_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_network, uint8_t **const pp_network_key)
	Decodes sd_ant_network_address_set command request. More...

uint32_t	ant_network_address_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_network_address_set command response. More...

uint32_t	ant_channel_radio_tx_power_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_tx_power, uint8_t const p_custom_tx_power)
	Decodes sd_ant_channel_radio_tx_power_set command request. More...

uint32_t	ant_channel_radio_tx_power_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_radio_tx_power_set command response. More...

uint32_t	ant_channel_rx_search_timeout_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const p_timeout)
	Decodes sd_ant_channel_rx_search_timeout_set command request. More...

uint32_t	ant_channel_rx_search_timeout_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_rx_search_timeout_set command response. More...

uint32_t	ant_channel_low_priority_rx_search_timeout_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const p_timeout)
	Decodes sd_ant_channel_low_priority_rx_search_timeout_set command request. More...

uint32_t	ant_channel_low_priority_rx_search_timeout_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_channel_low_priority_rx_search_timeout_set command response. More...

uint32_t	ant_prox_search_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_prox_threshold, uint8_t const p_custom_prox_threshold)
	Decodes sd_ant_prox_search_set command request. More...

uint32_t	ant_prox_search_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_prox_search_set command response. More...

uint32_t	ant_search_waveform_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint16_t *const p_waveform)
	Decodes sd_ant_search_waveform_set command request. More...

uint32_t	ant_search_waveform_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_search_waveform_set command response. More...

uint32_t	ant_channel_id_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_id_get command request. More...

uint32_t	ant_channel_id_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint16_t const const p_device_number, uint8_t const const p_device_type, uint8_t const *const p_transmit_type)
	Encodes sd_ant_channel_id_get command response. More...

uint32_t	ant_channel_radio_freq_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_radio_freq_get command request. More...

uint32_t	ant_channel_radio_freq_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_r_freq)
	Encodes sd_ant_channel_radio_freq_get command response. More...

uint32_t	ant_channel_period_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_period_get command request. More...

uint32_t	ant_channel_period_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint16_t const *const p_period)
	Encodes sd_ant_channel_period_get command response. More...

uint32_t	ant_search_channel_priority_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const p_search_priority)
	Decodes sd_ant_search_channel_priority_set command request. More...

uint32_t	ant_search_channel_priority_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_search_channel_priority_set command response. More...

uint32_t	ant_active_search_sharing_cycles_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const p_cycles)
	Decodes sd_ant_active_search_sharing_cycles_set command request. More...

uint32_t	ant_active_search_sharing_cycles_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_active_search_sharing_cycles_set command response. More...

uint32_t	ant_lib_config_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_ant_lib_config)
	Decodes sd_ant_lib_config_set command request. More...

uint32_t	ant_lib_config_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_lib_config_set command response. More...

uint32_t	ant_active_search_sharing_cycles_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_active_search_sharing_cycles_get command request. More...

uint32_t	ant_active_search_sharing_cycles_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_cycles)
	Encodes sd_ant_active_search_sharing_cycles_get command response. More...

uint32_t	ant_lib_config_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_ant_lib_config)
	Encodes sd_ant_lib_config_get command response. More...

uint32_t	ant_lib_config_clear_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_ant_lib_config)
	Decodes sd_ant_lib_config_clear command request. More...

uint32_t	ant_lib_config_clear_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_lib_config_clear command response. More...

uint32_t	ant_stack_reset_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_stack_reset command response. More...

uint32_t	ant_rx_scan_mode_start_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_sync_channel_packets_only)
	Decodes sd_ant_rx_scan_mode_start command request. More...

uint32_t	ant_rx_scan_mode_start_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_rx_scan_mode_start command response. More...

uint32_t	ant_id_list_add_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t *const pp_dev_id, uint8_t const p_list_index)
	Decodes sd_ant_id_list_add command request. More...

uint32_t	ant_id_list_add_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_id_list_add command response. More...

uint32_t	ant_id_list_config_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_id_list_size, uint8_t const p_inc_exc_flag)
	Decodes sd_ant_id_list_config command request. More...

uint32_t	ant_id_list_config_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_id_list_add command response. More...

uint32_t	ant_channel_status_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_channel_status_get command request. More...

uint32_t	ant_channel_status_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_status)
	Encodes sd_ant_channel_status_get command response. More...

uint32_t	ant_cw_test_mode_init_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_cw_test_mode_init command response. More...

uint32_t	ant_cw_test_mode_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_radio_freq, uint8_t const p_tx_power, uint8_t const p_custom_tx_power, uint8_t *const p_mode)
	Decodes sd_ant_cw_test_mode command request. More...

uint32_t	ant_cw_test_mode_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_cw_test_mode command response. More...

uint32_t	ant_version_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_version)
	Encodes sd_ant_version_get command response. More...

uint32_t	ant_capabilities_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t const *const p_capabilities)
	Encodes sd_ant_capabilities_get command response. More...

uint32_t	ant_crypto_channel_enable_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, uint8_t const p_enable, uint8_t const p_key_num, uint8_t *const p_decimation_rate)
	Decodes sd_ant_crypto_channel_enable command request. More...

uint32_t	ant_crypto_channel_enable_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_crypto_channel_enable command response. More...

uint32_t	ant_adv_burst_config_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_config, uint8_t *const p_size)
	Decodes sd_ant_adv_burst_config_set command request. More...

uint32_t	ant_adv_burst_config_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_adv_burst_config_set command response. More...

uint32_t	ant_crypto_key_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_key_num, uint8_t **const pp_key)
	Decodes sd_ant_crypto_key_set command request. More...

uint32_t	ant_crypto_key_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_crypto_key_set command response. More...

uint32_t	ant_crypto_info_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_type, uint8_t **const pp_info)
	Decodes sd_ant_crypto_info_set command request. More...

uint32_t	ant_crypto_info_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_crypto_info_set command response. More...

uint32_t	ant_crypto_info_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_type)
	Decodes sd_ant_crypto_info_get command request. More...

uint32_t	ant_crypto_info_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, uint8_t type, uint8_t const *const p_info)
	Encodes sd_ant_crypto_info_get command response. More...

uint32_t	ant_coex_config_set_req_dec (uint8_t const const p_buf, uint32_t packet_len, uint8_t const p_channel, ANT_BUFFER_PTR const p_coex_config, ANT_BUFFER_PTR const p_adv_coex_config)
	Decodes sd_ant_coex_config_set command request. More...

uint32_t	ant_coex_config_set_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len)
	Encodes sd_ant_coex_config_set command response. More...

uint32_t	ant_coex_config_get_req_dec (uint8_t const const p_buf, uint16_t packet_len, uint8_t const p_channel)
	Decodes sd_ant_coex_config_get command request. More...

uint32_t	ant_coex_config_get_rsp_enc (uint32_t return_code, uint8_t const p_buf, uint32_t const p_buf_len, ANT_BUFFER_PTR const p_coex_config, ANT_BUFFER_PTR const p_adv_coex_config)
	Encodes sd_ant_coex_config_get command response. More...

Detailed Description

Connectivity command request decoders and command response encoders.

Function Documentation

uint32_t ant_acknowledge_message_tx_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_size ,
		uint8_t **const	pp_mesg
	)

Decodes sd_ant_acknowledge_message_tx command request.

See Also: ant_acknowledge_message_tx_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to send the data on will be set.
[out]	p_size	Pointer to an unsigned char (1 octet) where the size of the message will be set.
[out]	pp_mesg	Pointer to pointer to the buffer where the acknowledge message will be set (array must be 8 octets).

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_acknowledge_message_tx_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_acknowledge_message_tx command response.

See Also: ant_acknowledge_message_tx_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_active_search_sharing_cycles_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_active_search_sharing_cycles_get command request.

See Also: ant_active_search_sharing_cycles_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_active_search_sharing_cycles_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_cycles
	)

Encodes sd_ant_active_search_sharing_cycles_get command response.

See Also: ant_active_search_sharing_cycles_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_cycles	Pointer to cycles.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_active_search_sharing_cycles_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_cycles
	)

Decodes sd_ant_active_search_sharing_cycles_set command request.

See Also: ant_active_search_sharing_cycles_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_cycles	Pointer to an unsigned char (1 octet) where the numbe of cycles will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_active_search_sharing_cycles_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_active_search_sharing_cycles_set command response.

See Also: ant_active_search_sharing_cycles_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_adv_burst_config_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_config ,
		uint8_t *const	p_size
	)

Decodes sd_ant_adv_burst_config_set command request.

See Also: ant_adv_burst_config_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_config	Pointer to the buffer where advanced burst configuration will be set.
[out]	p_size	Pointer to an unsigned char (1 octet) where the size of the configuration parameter buffer will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_adv_burst_config_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_adv_burst_config_set command response.

See Also: ant_adv_burst_config_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_broadcast_message_tx_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_size ,
		uint8_t **const	pp_mesg
	)

Decodes sd_ant_broadcast_message_tx command request.

See Also: ant_broadcast_message_tx_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to send the data on will be set.
[out]	p_size	Pointer to an unsigned char (1 octet) where the size of the message will be set.
[out]	pp_mesg	Pointer to pointer to the buffer where the broadcast message will be set (array must be 8 octets).

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_broadcast_message_tx_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_broadcast_message_tx command response.

See Also: ant_broadcast_message_tx_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_capabilities_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_capabilities
	)

Encodes sd_ant_capabilities_get command response.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_capabilities	Pointer to ant capabilities buffer.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_assign_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_type ,
		uint8_t *const	p_network ,
		uint8_t *const	p_ext_assign
	)

Decodes sd_ant_channel_assign command request.

See Also: ant_channel_assign_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to be assigned will be set.
[out]	p_type	Pointer to an unsigned char (1 octet) where the channel type to be assigned will be set.
[out]	p_network	Pointer to an unsigned char (1 octet) where the network key to associate with the channel will be set.
[out]	p_ext_assign	Pointer to a bit field (1 octet) where an extended assign will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_assign_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_assign command response.

See Also: ant_channel_assign_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_close_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_close command request.

See Also: ant_channel_close_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to be closed will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_close_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_close command response.

See Also: ant_channel_close_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_id_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_id_get command request.

See Also: ant_channel_id_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_id_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint16_t const *const	p_device_number ,
		uint8_t const *const	p_device_type ,
		uint8_t const *const	p_transmit_type
	)

Encodes sd_ant_channel_id_get command response.

See Also: ant_channel_id_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_device_number	Pointer to device number
[in]	p_device_type	Pointer to device type
[in]	p_transmit_type	Pointer to transmit type

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_id_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint16_t *const	p_device_number ,
		uint8_t *const	p_device_type ,
		uint8_t *const	p_transmission_type
	)

Decodes sd_ant_channel_id_set command request.

See Also: ant_channel_id_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_device_number	Pointer to an unsigned short (2 octets) where the device number will be set.
[out]	p_device_type	Pointer to an an unsigned char (1 octet) where the device type will be set.
[out]	p_transmission_type	Pointer to an unsigned char (1 octet) where the transmission type will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_id_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_id_set command response.

See Also: ant_channel_id_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_low_priority_rx_search_timeout_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_timeout
	)

Decodes sd_ant_channel_low_priority_rx_search_timeout_set command request.

See Also: ant_channel_low_priority_rx_search_timeout_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_timeout	Pointer to an unsigned char (1 octet) where the time-out value will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_low_priority_rx_search_timeout_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_low_priority_rx_search_timeout_set command response.

See Also: ant_channel_low_priority_rx_search_timeout_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_open_with_offset_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint16_t *const	p_usOffset
	)

Decodes sd_ant_channel_open command request.

See Also: ant_channel_open_with_offset_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to be opened will be set.
[out]	p_usOffset	Pointer to a channel start time offset value.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_open_with_offset_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_open command response.

See Also: ant_channel_open_with_offset_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_period_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_period_get command request.

See Also: ant_channel_period_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_period_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint16_t const *const	p_period
	)

Encodes sd_ant_channel_period_get command response.

See Also: ant_channel_period_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_period	Pointer to period

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_period_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint16_t *const	p_period
	)

Decodes sd_ant_channel_period_set command request.

See Also: ant_channel_period_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number associated with the period will be set.
[out]	p_period	Pointer to an unsigned short (2 octets) where the period will be set. Value is in 32 kHz counts (usPeriod/32768 s).

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_period_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_period_set command response.

See Also: ant_channel_period_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_freq_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_radio_freq_get command request.

See Also: ant_channel_radio_freq_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_freq_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_r_freq
	)

Encodes sd_ant_channel_radio_freq_get command response.

See Also: ant_channel_radio_freq_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_r_freq	Pointer to radio frequency

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_freq_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_freq
	)

Decodes sd_ant_channel_radio_freq_set command request.

See Also: ant_channel_radio_freq_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number associated with the radio frequency will be set.
[out]	p_freq	Pointer to an unsigned char (1 octet) where the radio frequency will be set. Value is offset from 2400 MHz (eg. 2466 MHz, ucFreq = 66).

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_freq_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_radio_freq_set command response.

See Also: ant_channel_radio_freq_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_tx_power_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_tx_power ,
		uint8_t *const	p_custom_tx_power
	)

Decodes sd_ant_channel_radio_tx_power_set command request.

See Also: ant_channel_radio_tx_power_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number to assign the radio TX power will be set.
[out]	p_tx_power	Pointer to an unsigned char (1 octet) where the ANT transmit power index will be set. See Radio TX Power Definitions in ant_parameters.h.
[out]	p_custom_tx_power	Pointer to an unsigned char (1 octet) where the custom nRF transmit power as defined in nrf51_bitfields.h will be set. Only applicable if tx_power is set to custom TX power selection.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_radio_tx_power_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_radio_tx_power_set command response.

See Also: ant_channel_radio_tx_power_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_rx_search_timeout_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_timeout
	)

Decodes sd_ant_channel_rx_search_timeout_set command request.

See Also: ant_channel_rx_search_timeout_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_timeout	Pointer to an unsigned char (1 octet) where the time-out value will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_rx_search_timeout_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_rx_search_timeout_set command response.

See Also: ant_channel_rx_search_timeout_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_status_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_status_get command request.

See Also: ant_channel_status_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_status_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_status
	)

Encodes sd_ant_channel_status_get command response.

See Also: ant_channel_status_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_status	Pointer to status

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_channel_unassign_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_channel_unassign command request.

See Also: ant_channel_unassign_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel to be unassigned will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_channel_unassign_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_channel_unassign command response.

See Also: ant_channel_unassign_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_coex_config_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_channel
	)

Decodes sd_ant_coex_config_get command request.

See Also: ant_channel_id_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_coex_config_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		ANT_BUFFER_PTR *const	p_coex_config ,
		ANT_BUFFER_PTR *const	p_adv_coex_config
	)

Encodes sd_ant_coex_config_get command response.

See Also: ant_channel_id_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_coex_config	Pointer to the coexistence configuration.
[in]	p_adv_coex_config	Pointer to the advanced coexistence configuration.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_coex_config_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		ANT_BUFFER_PTR *const	p_coex_config ,
		ANT_BUFFER_PTR *const	p_adv_coex_config
	)

Decodes sd_ant_coex_config_set command request.

See Also: ant_coex_config_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[in]	p_channel	Pointer to an unsigned char (1 octet) where the channel for which the coexistence configuration is to be set will be copied.
[in]	p_coex_config	Pointer to a buffer where the coexistence configuration to be set will be copied.
[in]	p_adv_coex_config	Pointer to a buffer where the advanced coexistence configuration to be set will be copied.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_coex_config_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_coex_config_set command response.

See Also: ant_coex_config_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_crypto_channel_enable_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_enable ,
		uint8_t *const	p_key_num ,
		uint8_t *const	p_decimation_rate
	)

Decodes sd_ant_crypto_channel_enable command request.

See Also: ant_crypto_channel_enable_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel in which encryption mode is set will be copied to.
[out]	p_enable	Pointer to an unsigned char (1 octet) where the encryption mode will be set.
[out]	p_key_num	Pointer to an unsigned char (1 octet) where the key index of the 128-bit key to be used for encryption will be set.
[out]	p_decimation_rate	Pointer to an unsigned char (1 octet) where the decimate rate to apply for encrypted slave channel will be set. Must be > 0.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_crypto_channel_enable_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_crypto_channel_enable command response.

See Also: ant_crypto_channel_enable_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_crypto_info_get_req_dec	(	uint8_t const *const	p_buf ,
		uint16_t	packet_len ,
		uint8_t *const	p_type
	)

Decodes sd_ant_crypto_info_get command request.

See Also: ant_crypto_info_get_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_type	Pointer to an unsigned char (1 octet) where the type of information being set will be copied.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_crypto_info_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t	type ,
		uint8_t const *const	p_info
	)

Encodes sd_ant_crypto_info_get command response.

See Also: ant_crypto_info_get_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	type	The type of information being set.
[in]	p_info	Pointer to info buffer.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_crypto_info_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_type ,
		uint8_t **const	pp_info
	)

Decodes sd_ant_crypto_info_set command request.

See Also: ant_crypto_info_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_type	Pointer to an unsigned char (1 octet) where the type of information being set will be copied.
[out]	pp_info	Pointer to pointer to buffer where information being set will be copied.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_crypto_info_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_crypto_info_set command response.

See Also: ant_crypto_info_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_crypto_key_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_key_num ,
		uint8_t **const	pp_key
	)

Decodes sd_ant_crypto_key_set command request.

See Also: ant_crypto_key_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_key_num	Pointer to an unsigned char (1 octet) where the key index for assignment will be set.
[out]	pp_key	Pointer to pointer to buffer (16 octets) where the 128-bit AES key to be assigned to the key index will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_crypto_key_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_crypto_key_set command response.

See Also: ant_crypto_key_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_cw_test_mode_init_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_cw_test_mode_init command response.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_cw_test_mode_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_radio_freq ,
		uint8_t *const	p_tx_power ,
		uint8_t *const	p_custom_tx_power ,
		uint8_t *const	p_mode
	)

Decodes sd_ant_cw_test_mode command request.

See Also: ant_cw_test_mode_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_radio_freq	Pointer to an unsigned char (1 octet) where the radio frequency offset from 2400 MHz for continuous wave mode will be set. (eg. 2466 MHz, ucRadioFreq = 66).
[out]	p_tx_power	Pointer to an unsigned char (1 octet) where the ANT transmit power index for continuous wave mode will be set. See Radio TX Power Definitions in ant_parameters.h
[out]	p_custom_tx_power	Pointer to an unsigned char (1 octet) where the custom nRF transmit power as defined in nrf51_bitfields.h will be set. Only applicable if ucTxPower is set to custom TX power selection.
[out]	p_mode	Pointer to an unsigned char (1 octet) where the test mode type will be set.
[in]	p_buf	Pointer to buffer where encoded data command will be returned.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_cw_test_mode_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_cw_test_mode command response.

See Also: ant_cw_test_mode_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_enable_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		ANT_ENABLE **const	pp_ant_enable_params
	)

Decodes sd_ant_enable command request.

See Also: ant_enable_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	pp_ant_enable_params	Pointer to pointer to ANT_ENABLE . `It` will be set to NULL if p_ant_enable_params is not present in the packet.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_enable_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_enable command response.

See Also: ant_enable_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_id_list_add_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t **const	pp_dev_id ,
		uint8_t *const	p_list_index
	)

Decodes sd_ant_id_list_add command request.

See Also: ant_id_list_add_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number to add the list entry to will be set.
[out]	pp_dev_id	Pointer to pointer to where the Dev ID will be stored.
[out]	p_list_index	Pointer to an unsigned char (1 octet) where the list index (0-3), will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_id_list_add_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_id_list_add command response.

See Also: ant_id_list_add_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_id_list_config_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_id_list_size ,
		uint8_t *const	p_inc_exc_flag
	)

Decodes sd_ant_id_list_config command request.

See Also: ant_id_list_config_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) wher the channel number of the device ID list will be stored.
[out]	p_id_list_size	Pointer to an unsigned char (1 octet) where the size of the inclusion or exclusion list (0-4) will be stored.
[out]	p_inc_exc_flag	Pointer to an unsigned char (1 octet) where the type of list will be stored.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_id_list_config_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_id_list_add command response.

See Also: ant_id_list_config_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_lib_config_clear_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_ant_lib_config
	)

Decodes sd_ant_lib_config_clear command request.

See Also: ant_lib_config_clear_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_ant_lib_config	Pointer to an unsigned char (1 octet) where the ANT lib config bit(s) to clear will be set. See ANT Library Config in ant_parameters.h.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_lib_config_clear_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_lib_config_clear command response.

See Also: ant_lib_config_clear_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_lib_config_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_ant_lib_config
	)

Encodes sd_ant_lib_config_get command response.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_ant_lib_config	Pointer to ANT library configuration.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_lib_config_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_ant_lib_config
	)

Decodes sd_ant_lib_config_set command request.

See Also: ant_lib_config_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_ant_lib_config	Pointer to an unsigned char (1 octet) where the ANT lib config bit flags will be set. See ANT Library Config in ant_parameters.h.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_lib_config_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_lib_config_set command response.

See Also: ant_lib_config_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_network_address_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_network ,
		uint8_t **const	pp_network_key
	)

Decodes sd_ant_network_address_set command request.

See Also: ant_network_address_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_network	Pointer to an unsigned char (1 octet) where the network number to assign the network address to will be set.
[out]	pp_network_key	Pointer to a pointer to where the network key (8 octets in length) will be set.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_network_address_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_network_address_set command response.

See Also: ant_network_address_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_prox_search_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_prox_threshold ,
		uint8_t *const	p_custom_prox_threshold
	)

Decodes sd_ant_prox_search_set command request.

See Also: ant_prox_search_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_prox_threshold	Pointer to an unsigned char (1 octet) where the minimum RSSI threshold required for acquisition during a search will be set. See Radio Proximity Search Threshold in ant_parameters.h.
[out]	p_custom_prox_threshold	Pointer to an unsigned char (1 octet) where the custom minimum RSSI threshold for acquisition during a search will be set. Only applicable if prox_threshold is set to custom proximity selection.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_prox_search_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_prox_search_set command response.

See Also: ant_prox_search_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_rx_scan_mode_start_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_sync_channel_packets_only
	)

Decodes sd_ant_rx_scan_mode_start command request.

See Also: ant_rx_scan_mode_start_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_sync_channel_packets_only	Pointer to an unsigned char (1 octet) where the synchronous channel only scanning mode will be set. 0 = disable, 1 = enable.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_rx_scan_mode_start_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_rx_scan_mode_start command response.

See Also: ant_rx_scan_mode_start_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_search_channel_priority_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint8_t *const	p_search_priority
	)

Decodes sd_ant_search_channel_priority_set command request.

See Also: ant_search_channel_priority_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_search_priority	Pointer to an unsigned char (1 octet) where the search priority value will be set. 0 to 7 (Default = 0).

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_search_channel_priority_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_search_channel_priority_set command response.

See Also: ant_search_channel_priority_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_search_waveform_set_req_dec	(	uint8_t const *const	p_buf ,
		uint32_t	packet_len ,
		uint8_t *const	p_channel ,
		uint16_t *const	p_waveform
	)

Decodes sd_ant_search_waveform_set command request.

See Also: ant_search_waveform_set_rsp_enc for response encoding.

Parameters

[in]	p_buf	Pointer to beginning of command request packet.
[in]	packet_len	Length (in bytes) of response packet.
[out]	p_channel	Pointer to an unsigned char (1 octet) where the channel number will be set.
[out]	p_waveform	Pointer to an unsigned short (2 octets) where the channel waveform period (usWaveform/32768 s) will be set. Default = 316.

Return values

NRF_SUCCESS	Decoding success.
NRF_ERROR_NULL	Decoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Decoding failure. Incorrect buffer length.

uint32_t ant_search_waveform_set_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_search_waveform_set command response.

See Also: ant_search_waveform_set_req_dec for request decoding.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_stack_reset_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len
	)

Encodes sd_ant_stack_reset command response.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

uint32_t ant_version_get_rsp_enc	(	uint32_t	return_code ,
		uint8_t *const	p_buf ,
		uint32_t *const	p_buf_len ,
		uint8_t const *const	p_version
	)

Encodes sd_ant_version_get command response.

Parameters

[in]	return_code	Return code indicating if command was successful or not.
[out]	p_buf	Pointer to buffer where encoded data command response will be returned.
[in,out]	p_buf_len	`in:` Size of `p_buf` buffer. `out:` Length of encoded command response packet.
[in]	p_version	Pointer to version.

Return values

NRF_SUCCESS	Encoding success.
NRF_ERROR_NULL	Encoding failure. NULL pointer supplied.
NRF_ERROR_INVALID_LENGTH	Encoding failure. Incorrect buffer length.

Functions

Detailed Description

Function Documentation