UART peripheral driver configuration

Enable UART0 instance.

Note

This is an NRF_CONFIG macro.

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

Default Baudrate.

Following options are available:

• 323584 - 1200 baud
• 643072 - 2400 baud
• 1290240 - 4800 baud
• 2576384 - 9600 baud
• 3866624 - 14400 baud
• 5152768 - 19200 baud
• 7729152 - 28800 baud
• 8388608 - 31250 baud
• 10309632 - 38400 baud
• 15007744 - 56000 baud
• 15462400 - 57600 baud
• 20615168 - 76800 baud
• 30924800 - 115200 baud
• 61845504 - 230400 baud
• 67108864 - 250000 baud
• 123695104 - 460800 baud
• 247386112 - 921600 baud
• 268435456 - 1000000 baud

Note

This is an NRF_CONFIG macro.

Hardware Flow Control.

Following options are available:

• 0 - Disabled
• 1 - Enabled

Note

This is an NRF_CONFIG macro.

Interrupt priority.

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (Software Component only)
• 5 - 5 (Software Component only)
• 6 - 6 (Software Component only)
• 7 - 7 (Software Component only)

Note

This is an NRF_CONFIG macro.

Parity.

Following options are available:

• 0 - Excluded
• 14 - Included

Note

This is an NRF_CONFIG macro.

Enable UART driver.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.