Hardware access layer for managing the Analog-to-Digital Converter (ADC) peripheral. More...

Data Structures
struct	nrf_adc_config_t
	Analog-to-digital converter configuration. More...

Typedefs
typedef uint16_t	nrf_adc_value_t
	Analog-to-digital value type.

Enumerations
enum	nrf_adc_int_mask_t { NRF_ADC_INT_END_MASK = ADC_INTENSET_END_Msk }
	ADC interrupts. More...

enum	nrf_adc_config_resolution_t { NRF_ADC_CONFIG_RES_8BIT = ADC_CONFIG_RES_8bit, NRF_ADC_CONFIG_RES_9BIT = ADC_CONFIG_RES_9bit, NRF_ADC_CONFIG_RES_10BIT = ADC_CONFIG_RES_10bit }
	Resolution of the analog-to-digital converter. More...

enum	nrf_adc_config_scaling_t { NRF_ADC_CONFIG_SCALING_INPUT_FULL_SCALE = ADC_CONFIG_INPSEL_AnalogInputNoPrescaling, NRF_ADC_CONFIG_SCALING_INPUT_TWO_THIRDS = ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling, NRF_ADC_CONFIG_SCALING_INPUT_ONE_THIRD = ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling, NRF_ADC_CONFIG_SCALING_SUPPLY_TWO_THIRDS = ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling, NRF_ADC_CONFIG_SCALING_SUPPLY_ONE_THIRD = ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling }
	Scaling factor of the analog-to-digital conversion. More...

enum	nrf_adc_config_extref_t { NRF_ADC_CONFIG_EXTREFSEL_NONE = ADC_CONFIG_EXTREFSEL_None, NRF_ADC_CONFIG_EXTREFSEL_AREF0 = ADC_CONFIG_EXTREFSEL_AnalogReference0, NRF_ADC_CONFIG_EXTREFSEL_AREF1 = ADC_CONFIG_EXTREFSEL_AnalogReference1 }
	External reference selection of the analog-to-digital converter. More...

enum	nrf_adc_config_reference_t { NRF_ADC_CONFIG_REF_VBG = ADC_CONFIG_REFSEL_VBG, NRF_ADC_CONFIG_REF_SUPPLY_ONE_HALF = ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling, NRF_ADC_CONFIG_REF_SUPPLY_ONE_THIRD = ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling, NRF_ADC_CONFIG_REF_EXT = ADC_CONFIG_REFSEL_External }
	Reference selection of the analog-to-digital converter. More...

enum	nrf_adc_config_input_t { NRF_ADC_CONFIG_INPUT_DISABLED = ADC_CONFIG_PSEL_Disabled, NRF_ADC_CONFIG_INPUT_0 = ADC_CONFIG_PSEL_AnalogInput0, NRF_ADC_CONFIG_INPUT_1 = ADC_CONFIG_PSEL_AnalogInput1, NRF_ADC_CONFIG_INPUT_2 = ADC_CONFIG_PSEL_AnalogInput2, NRF_ADC_CONFIG_INPUT_3 = ADC_CONFIG_PSEL_AnalogInput3, NRF_ADC_CONFIG_INPUT_4 = ADC_CONFIG_PSEL_AnalogInput4, NRF_ADC_CONFIG_INPUT_5 = ADC_CONFIG_PSEL_AnalogInput5, NRF_ADC_CONFIG_INPUT_6 = ADC_CONFIG_PSEL_AnalogInput6, NRF_ADC_CONFIG_INPUT_7 = ADC_CONFIG_PSEL_AnalogInput7 }
	Input selection of the analog-to-digital converter. More...

enum	nrf_adc_task_t { NRF_ADC_TASK_START = offsetof(NRF_ADC_Type, TASKS_START), NRF_ADC_TASK_STOP = offsetof(NRF_ADC_Type, TASKS_STOP) }
	Analog-to-digital converter tasks. More...

enum	nrf_adc_event_t { NRF_ADC_EVENT_END = offsetof(NRF_ADC_Type, EVENTS_END) }
	Analog-to-digital converter events. More...

Functions
__STATIC_INLINE void	nrf_adc_task_trigger ( nrf_adc_task_t task)
	Function for activating a specific ADC task. More...

__STATIC_INLINE uint32_t	nrf_adc_task_address_get ( nrf_adc_task_t task)
	Function for getting the address of an ADC task register. More...

__STATIC_INLINE bool	nrf_adc_event_check ( nrf_adc_event_t event)
	Function for checking the state of an ADC event. More...

__STATIC_INLINE void	nrf_adc_event_clear ( nrf_adc_event_t event)
	Function for clearing an ADC event. More...

__STATIC_INLINE uint32_t	nrf_adc_event_address_get ( nrf_adc_event_t adc_event)
	Function for getting the address of a specific ADC event register. More...

__STATIC_INLINE void	nrf_adc_int_enable (uint32_t int_mask)
	Function for enabling the specified interrupts. More...

__STATIC_INLINE void	nrf_adc_int_disable (uint32_t int_mask)
	Function for disabling the specified interrupts. More...

__STATIC_INLINE bool	nrf_adc_int_enable_check (uint32_t int_mask)
	Function for retrieving the state of the specified ADC interrupts. More...

__STATIC_INLINE bool	nrf_adc_busy_check (void)
	Function for checking whether the ADC is busy. More...

__STATIC_INLINE void	nrf_adc_enable (void)
	Function for enabling the ADC.

__STATIC_INLINE void	nrf_adc_disable (void)
	Function for disabling the ADC.

__STATIC_INLINE bool	nrf_adc_enable_check (void)
	Function for checking if the ADC is enabled. More...

__STATIC_INLINE nrf_adc_value_t	nrf_adc_result_get (void)
	Function for retrieving the ADC conversion result. More...

__STATIC_INLINE void	nrf_adc_init ( nrf_adc_config_t const *p_config)
	Function for initializing the ADC. More...

Detailed Description

Hardware access layer for managing the Analog-to-Digital Converter (ADC) peripheral.

Enumeration Type Documentation

enum nrf_adc_config_extref_t

External reference selection of the analog-to-digital converter.

Enumerator
NRF_ADC_CONFIG_EXTREFSEL_NONE	Analog reference inputs disabled.
NRF_ADC_CONFIG_EXTREFSEL_AREF0	AREF0 as analog reference.
NRF_ADC_CONFIG_EXTREFSEL_AREF1	AREF1 as analog reference.

enum nrf_adc_config_input_t

Input selection of the analog-to-digital converter.

Enumerator
NRF_ADC_CONFIG_INPUT_DISABLED	No input selected.
NRF_ADC_CONFIG_INPUT_0	Input 0.
NRF_ADC_CONFIG_INPUT_1	Input 1.
NRF_ADC_CONFIG_INPUT_2	Input 2.
NRF_ADC_CONFIG_INPUT_3	Input 3.
NRF_ADC_CONFIG_INPUT_4	Input 4.
NRF_ADC_CONFIG_INPUT_5	Input 5.
NRF_ADC_CONFIG_INPUT_6	Input 6.
NRF_ADC_CONFIG_INPUT_7	Input 7.

enum nrf_adc_config_reference_t

Reference selection of the analog-to-digital converter.

Enumerator
NRF_ADC_CONFIG_REF_VBG	1.2 V reference.
NRF_ADC_CONFIG_REF_SUPPLY_ONE_HALF	1/2 of power supply.
NRF_ADC_CONFIG_REF_SUPPLY_ONE_THIRD	1/3 of power supply.
NRF_ADC_CONFIG_REF_EXT	External reference. See nrf_adc_config_extref_t for further configuration.

enum nrf_adc_config_resolution_t

Resolution of the analog-to-digital converter.

Enumerator
NRF_ADC_CONFIG_RES_8BIT	8-bit resolution.
NRF_ADC_CONFIG_RES_9BIT	9-bit resolution.
NRF_ADC_CONFIG_RES_10BIT	10-bit resolution.

enum nrf_adc_config_scaling_t

Scaling factor of the analog-to-digital conversion.

Enumerator
NRF_ADC_CONFIG_SCALING_INPUT_FULL_SCALE	Full scale input.
NRF_ADC_CONFIG_SCALING_INPUT_TWO_THIRDS	2/3 scale input.
NRF_ADC_CONFIG_SCALING_INPUT_ONE_THIRD	1/3 scale input.
NRF_ADC_CONFIG_SCALING_SUPPLY_TWO_THIRDS	2/3 of supply.
NRF_ADC_CONFIG_SCALING_SUPPLY_ONE_THIRD	1/3 of supply.

enum nrf_adc_event_t

Analog-to-digital converter events.

Enumerator
NRF_ADC_EVENT_END	End of a conversion event.

enum nrf_adc_int_mask_t

ADC interrupts.

Enumerator
NRF_ADC_INT_END_MASK	ADC interrupt on END event.

enum nrf_adc_task_t

Analog-to-digital converter tasks.

Enumerator
NRF_ADC_TASK_START	ADC start sampling task.
NRF_ADC_TASK_STOP	ADC stop sampling task.

Function Documentation

__STATIC_INLINE bool nrf_adc_busy_check ( void )

Function for checking whether the ADC is busy.

This function checks whether the ADC converter is busy with a conversion.

Return values

true	If the ADC is busy.
false	If the ADC is not busy.

__STATIC_INLINE bool nrf_adc_enable_check ( void )

Function for checking if the ADC is enabled.

Return values

true	If the ADC is enabled.
false	If the ADC is not enabled.

__STATIC_INLINE uint32_t nrf_adc_event_address_get ( nrf_adc_event_t adc_event )

Function for getting the address of a specific ADC event register.

Parameters

[in] adc_event ADC event.

Returns: Address of the specified ADC event.

__STATIC_INLINE bool nrf_adc_event_check ( nrf_adc_event_t event )

Function for checking the state of an ADC event.

Parameters

[in] event Event to check.

Return values

true	If the event is set.
false	If the event is not set.

__STATIC_INLINE void nrf_adc_event_clear ( nrf_adc_event_t event )

Function for clearing an ADC event.

Parameters

[in] event Event to clear.

__STATIC_INLINE void nrf_adc_init ( nrf_adc_config_t const * p_config )

Function for initializing the ADC.

This function writes data to ADC's CONFIG register. After the configuration, the ADC is in DISABLE state and must be enabled before using it.

Parameters

[in] p_config Configuration parameters.

__STATIC_INLINE void nrf_adc_int_disable ( uint32_t int_mask )

Function for disabling the specified interrupts.

Parameters

[in] int_mask Interrupts to disable.

__STATIC_INLINE void nrf_adc_int_enable ( uint32_t int_mask )

Function for enabling the specified interrupts.

Parameters

[in] int_mask Interrupts to enable.

__STATIC_INLINE bool nrf_adc_int_enable_check ( uint32_t int_mask )

Function for retrieving the state of the specified ADC interrupts.

Parameters

[in] int_mask Interrupts to check.

Return values

true	If all specified interrupts are enabled.
false	If at least one of the given interrupts is not enabled.

__STATIC_INLINE nrf_adc_value_t nrf_adc_result_get ( void )

Function for retrieving the ADC conversion result.

This function retrieves and returns the last analog-to-digital conversion result.

Returns: Last conversion result.

__STATIC_INLINE uint32_t nrf_adc_task_address_get ( nrf_adc_task_t task )

Function for getting the address of an ADC task register.

Parameters

[in] task ADC task.

Returns: Address of the specified ADC task.

__STATIC_INLINE void nrf_adc_task_trigger ( nrf_adc_task_t task )

Function for activating a specific ADC task.

Parameters

[in] task Task to activate.

ADC HAL

nRF5 SDK v15.0.0

Data Structures

Typedefs

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation