Address offset: 0x534
CRC configuration
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | B | B | A | A | |||||||||||||||||||||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
RW |
LEN |
[0..3] |
CRC length in number of bytes For MODE Ble_LR125Kbit and Ble_LR500Kbit, only LEN set to 3 is supported |
|||||||||||||||||||||||||||||||
|
Disabled |
0 |
CRC length is zero and CRC calculation is disabled |
|||||||||||||||||||||||||||||||||
|
One |
1 |
CRC length is one byte and CRC calculation is enabled |
|||||||||||||||||||||||||||||||||
|
Two |
2 |
CRC length is two bytes and CRC calculation is enabled |
|||||||||||||||||||||||||||||||||
|
Three |
3 |
CRC length is three bytes and CRC calculation is enabled |
|||||||||||||||||||||||||||||||||
| B |
RW |
SKIPADDR |
Include or exclude packet address field out of CRC calculation. |
||||||||||||||||||||||||||||||||
|
Include |
0 |
CRC calculation includes address field |
|||||||||||||||||||||||||||||||||
|
Skip |
1 |
CRC calculation does not include address field. The CRC calculation will start at the first byte after the address. |
|||||||||||||||||||||||||||||||||
|
Ieee802154 |
2 |
CRC calculation as per 802.15.4 standard. Starting at first byte after length field. |
|||||||||||||||||||||||||||||||||