Address offset: 0x11C
Use this to set, or read, the sequencer state.
Might ignore writes when the trace unit is enabled or not idle.
Only returns stable data when TRCSTATR.PMSTABLE == 1.
When the sequencer is used, all sequencer state transitions must be programmed with a valid event.
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | A | A | |||||||||||||||||||||||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
RW |
STATE |
Sets or returns the state of the sequencer. |
||||||||||||||||||||||||||||||||
|
State0 |
0 |
The sequencer is in state 0. |
|||||||||||||||||||||||||||||||||
|
State1 |
1 |
The sequencer is in state 1. |
|||||||||||||||||||||||||||||||||
|
State2 |
2 |
The sequencer is in state 2. |
|||||||||||||||||||||||||||||||||
|
State3 |
3 |
The sequencer is in state 3. |
|||||||||||||||||||||||||||||||||