Address offset: 0x0A8
ViewData include / exclude control.
Might ignore writes when the trace unit is enabled or not idle.
This register must be programmed when one or more address comparators are implemented.
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | P | O | N | M | L | K | J | I | H | G | F | E | D | C | B | A | |||||||||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A-H |
RW |
INCLUDE[i] (i=0..7) |
Include range field. Selects which address range comparator pairs are in use with ViewData include control. |
||||||||||||||||||||||||||||||||
|
Disabled |
0 |
The address range that address range comparator i defines, is not selected for ViewData include control. |
|||||||||||||||||||||||||||||||||
|
Enabled |
1 |
The address range that address range comparator i defines, is selected for ViewData include control. |
|||||||||||||||||||||||||||||||||
| I-P |
RW |
EXCLUDE[i] (i=0..7) |
Exclude range field. Selects which address range comparator pairs are in use with ViewData exclude control. |
||||||||||||||||||||||||||||||||
|
Disabled |
0 |
The address range that address range comparator i defines, is not selected for ViewData exclude control. |
|||||||||||||||||||||||||||||||||
|
Enabled |
1 |
The address range that address range comparator i defines, s selected for ViewData exclude control. |
|||||||||||||||||||||||||||||||||