Address offset: 0x024
The TARGETID register provides information about the target when the host is connected to a single device.
The TARGETID register is accessed by a read of DP register 0x4 when the DPBANKSEL bit in the SELECT register is set to 0x2.
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | C | C | C | C | B | B | B | B | B | B | B | B | B | B | B | B | A | A | A | A | A | A | A | A | A | A | A | ||||||||
| Reset 0x00000289 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
R |
TDESIGNER |
An 11-bit code JEDEC JEP106 continuation code and identity code. The ID identifies the designer of the part. |
||||||||||||||||||||||||||||||||
|
NordicSemi |
0x144 |
Nordic Semiconductor ASA. |
|||||||||||||||||||||||||||||||||
| B |
R |
TPARTNO |
Part number. |
||||||||||||||||||||||||||||||||
| C |
R |
TREVISION |
Target revision. |
||||||||||||||||||||||||||||||||