Address offset: 0x3C
Controls which regions in the memory map are enabled to use branch broadcasting.
Might ignore writes when the trace unit is enabled or not idle.
Must be programmed if TRCCONFIGR.BB == 1.
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | H | G | F | E | D | C | B | A | |||||||||||||||||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A-H |
RW |
RANGE[i] (i=0..7) |
Address range field. Selects which address range comparator pairs are in use with branch broadcasting. Each field represents an address range comparator pair, so field[i] controls the selection of address range comparator pair i. |
||||||||||||||||||||||||||||||||
|
Disabled |
0 |
The address range that address range comparator pair i defines, is not selected. |
|||||||||||||||||||||||||||||||||
|
Enabled |
1 |
The address range that address range comparator pair n defines, is selected. |
|||||||||||||||||||||||||||||||||