Address offset: 0xE28
Packet configuration register 1
| Bit number | 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | F | E | D | C | C | C | B | B | B | B | B | B | B | B | A | A | A | A | A | A | A | A | |||||||||||||
| Reset 0x00000000 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | |||
| ID | R/W | Field | Value ID | Value | Description | ||||||||||||||||||||||||||||||
| A |
RW |
MAXLEN |
[0..255] |
Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN. |
|||||||||||||||||||||||||||||||
| B |
RW |
STATLEN |
[0..255] |
Static length in number of bytes The static length parameter is added to the total length of the payload when sending and receiving packets, e.g. if the static length is set to N the radio will receive or send N bytes more than what is defined in the LENGTH field of the packet. |
|||||||||||||||||||||||||||||||
| C |
RW |
BALEN |
[2..4] |
Base address length in number of bytes The address field is composed of the base address and the one byte long address prefix, e.g. set BALEN=2 to get a total address of 3 bytes. |
|||||||||||||||||||||||||||||||
| D |
RW |
ENDIAN |
On-air endianness of packet, this applies to the S0, LENGTH, S1, and the PAYLOAD fields. |
||||||||||||||||||||||||||||||||
|
Little |
0 |
Least significant bit on air first |
|||||||||||||||||||||||||||||||||
|
Big |
1 |
Most significant bit on air first |
|||||||||||||||||||||||||||||||||
| E |
RW |
WHITEEN |
Enable or disable packet whitening Including the address field to CRC check is not supported for whitened packets. |
||||||||||||||||||||||||||||||||
|
Disabled |
0 |
Disable |
|||||||||||||||||||||||||||||||||
|
Enabled |
1 |
Enable |
|||||||||||||||||||||||||||||||||
| F |
RW |
WHITEOFFSET |
If whitening is enabled S0 can be configured to be excluded from whitening |
||||||||||||||||||||||||||||||||
|
Include |
0 |
S0 included in whitening |
|||||||||||||||||||||||||||||||||
|
Exclude |
1 |
S0 excluded from whitening |
|||||||||||||||||||||||||||||||||