Instances
| Instance | Domain | Base address | TrustZone | Split access | Description | ||
|---|---|---|---|---|---|---|---|
| Map | Att | DMA | |||||
|
USBHS : S |
GLOBAL |
0x5005A000 |
US | S | SA | No |
USBHS |
Configuration
| Instance | Domain | Configuration |
|---|---|---|
|
USBHS : S |
GLOBAL |
Has Start of Frame (SOF) event. RTUNE method for calibrating DP and DM 45Ohm source impedance without external TXRTUNE resistor available. Includes STATUS register |
Register overview
| Register | Offset | TZ | Description |
|---|---|---|---|
| TASKS_START | 0x000 |
Start the USB peripheral. |
|
| TASKS_STOP | 0x004 |
Stop the USB peripheral |
|
| PUBLISH_SOF | 0x180 |
Publish configuration for SOF event. |
|
| ENABLE | 0x400 |
Enable USB peripheral. |
|
| STATUS | 0x408 |
This register contains status bits for the USBHS |
|
| PHY.CONFIG | 0x440 |
USB PHY parameter overrides |
|
| PHY.CLOCK | 0x444 |
USB PHY clock configurations |
|
| PHY.BATTCHRG | 0x448 |
Battery Charging Configuration |
|
| PHY.BATTCHRGSTATUS | 0x44C |
Battery charger input signals |
|
| PHY.INPUTOVERRIDE | 0x458 |
Enables overriding of individual signals to the PHY, the override values are set in PHY.OVERRIDEVALUES |
|
| PHY.OVERRIDEVALUES | 0x45C |
Values that are used to override the input signals to the PHY. |
|
| PHY.RTUNE | 0x464 |
The RTUNE mode is an alternative method for calibrating the DP and DM 45-Ohm source impedance. |