Device Firmware Update Service. More...

Data Structures
struct	ble_dfu_pkt_write_t
	DFU Packet structure. More...

struct	ble_pkt_rcpt_notif_req_t
	Packet receipt notification request structure. More...

struct	ble_dfu_evt_t
	DFU Event structure. More...

struct	ble_dfu_s
	DFU service structure. More...

struct	ble_dfu_init_t
	DFU service initialization structure. More...

Macros
#define	BLE_DFU_SERVICE_UUID 0x1530

#define	BLE_DFU_PKT_CHAR_UUID 0x1532

#define	BLE_DFU_CTRL_PT_UUID 0x1531

#define	BLE_DFU_STATUS_REP_UUID 0x1533

#define	BLE_DFU_REV_CHAR_UUID 0x1534

Typedefs
typedef struct ble_dfu_s	ble_dfu_t

typedef void(*	ble_dfu_evt_handler_t )( ble_dfu_t p_dfu, ble_dfu_evt_t p_evt)
	DFU Service event handler type.

Enumerations
enum	ble_dfu_evt_type_t { BLE_DFU_START , BLE_DFU_RECEIVE_INIT_DATA , BLE_DFU_RECEIVE_APP_DATA , BLE_DFU_VALIDATE , BLE_DFU_ACTIVATE_N_RESET , BLE_DFU_SYS_RESET , BLE_DFU_PKT_RCPT_NOTIF_ENABLED , BLE_DFU_PKT_RCPT_NOTIF_DISABLED , BLE_DFU_PACKET_WRITE , BLE_DFU_BYTES_RECEIVED_SEND }
	DFU Event type. More...

enum	ble_dfu_procedure_t { BLE_DFU_START_PROCEDURE = 1, BLE_DFU_INIT_PROCEDURE = 2, BLE_DFU_RECEIVE_APP_PROCEDURE = 3, BLE_DFU_VALIDATE_PROCEDURE = 4, BLE_DFU_PKT_RCPT_REQ_PROCEDURE = 8 }
	DFU Procedure type. More...

enum	ble_dfu_resp_val_t { BLE_DFU_RESP_VAL_SUCCESS = 1, BLE_DFU_RESP_VAL_INVALID_STATE , BLE_DFU_RESP_VAL_NOT_SUPPORTED , BLE_DFU_RESP_VAL_DATA_SIZE , BLE_DFU_RESP_VAL_CRC_ERROR , BLE_DFU_RESP_VAL_OPER_FAILED }
	DFU Response value type. More...

Functions
void	ble_dfu_on_ble_evt ( ble_dfu_t p_dfu, ble_evt_t p_ble_evt)
	Function for handling a BLE event. More...

uint32_t	ble_dfu_init ( ble_dfu_t p_dfu, ble_dfu_init_t p_dfu_init)
	Function for initializing the DFU service. More...

uint32_t	ble_dfu_response_send ( ble_dfu_t *p_dfu, ble_dfu_procedure_t dfu_proc, ble_dfu_resp_val_t resp_val)
	Function for sending response to a control point command. More...

uint32_t	ble_dfu_bytes_rcvd_report ( ble_dfu_t *p_dfu, uint32_t num_of_firmware_bytes_rcvd)
	Function for notifying the peer about the number of bytes of firmware data received. More...

uint32_t	ble_dfu_pkts_rcpt_notify ( ble_dfu_t *p_dfu, uint32_t num_of_firmware_bytes_rcvd)
	Function for sending Packet Receipt Notification to the peer. More...

Detailed Description

Device Firmware Update Service.

The Device Firmware Update (DFU) service is a GATT based service that can be used for performing firmware updates over BLE. Note that this implementation uses vendor specific UUIDs for service and characteristics and is intended to demonstrate the firmware updates over BLE. Refer BLE DFU Service and BLE DFU Profile for more information on the service and profile respectively.

Macro Definition Documentation

#define BLE_DFU_CTRL_PT_UUID 0x1531

The UUID of the DFU Control Point.

#define BLE_DFU_PKT_CHAR_UUID 0x1532

The UUID of the DFU Packet Characteristic.

#define BLE_DFU_REV_CHAR_UUID 0x1534

The UUID of the DFU Revision Characteristic.

#define BLE_DFU_SERVICE_UUID 0x1530

The UUID of the DFU Service.

#define BLE_DFU_STATUS_REP_UUID 0x1533

The UUID of the DFU Status Report Characteristic.

Enumeration Type Documentation

enum ble_dfu_evt_type_t

DFU Event type.

This enumeration contains the types of events that will be received from the DFU Service.

Enumerator
BLE_DFU_START	The event indicating that the peer wants the application to prepare for a new firmware update.
BLE_DFU_RECEIVE_INIT_DATA	The event indicating that the peer wants the application to prepare to receive init parameters.
BLE_DFU_RECEIVE_APP_DATA	The event indicating that the peer wants the application to prepare to receive the new firmware image.
BLE_DFU_VALIDATE	The event indicating that the peer wants the application to validate the newly received firmware image.
BLE_DFU_ACTIVATE_N_RESET	The event indicating that the peer wants the application to undergo activate new firmware and restart with new valid application
BLE_DFU_SYS_RESET	The event indicating that the peer wants the application to undergo a reset and start the currently valid application image.
BLE_DFU_PKT_RCPT_NOTIF_ENABLED	The event indicating that the peer has enabled packet receipt notifications. It is the responsibility of the application to call ble_dfu_pkts_rcpt_notify each time the number of packets indicated by num_of_pkts field in ble_dfu_evt_t is received.
BLE_DFU_PKT_RCPT_NOTIF_DISABLED	The event indicating that the peer has disabled the packet receipt notifications.
BLE_DFU_PACKET_WRITE	The event indicating that the peer has written a value to the 'DFU Packet' characteristic. The data received from the peer will be present in the BLE_DFU_PACKET_WRITE element contained within ble_dfu_evt_t .
BLE_DFU_BYTES_RECEIVED_SEND	The event indicating that the peer is requesting for the number of bytes of firmware data last received by the application. It is the responsibility of the application to call ble_dfu_pkts_rcpt_notify in response to this event.

enum ble_dfu_procedure_t

DFU Procedure type.

This enumeration contains the types of DFU procedures.

Enumerator
BLE_DFU_START_PROCEDURE	DFU Start procedure.
BLE_DFU_INIT_PROCEDURE	DFU Initialization procedure.
BLE_DFU_RECEIVE_APP_PROCEDURE	Firmware receiving procedure.
BLE_DFU_VALIDATE_PROCEDURE	Firmware image validation procedure .
BLE_DFU_PKT_RCPT_REQ_PROCEDURE	Packet receipt notification request procedure.

enum ble_dfu_resp_val_t

DFU Response value type.

Enumerator
BLE_DFU_RESP_VAL_SUCCESS	Success.
BLE_DFU_RESP_VAL_INVALID_STATE	Invalid state.
BLE_DFU_RESP_VAL_NOT_SUPPORTED	Operation not supported.
BLE_DFU_RESP_VAL_DATA_SIZE	Data size exceeds limit.
BLE_DFU_RESP_VAL_CRC_ERROR	CRC Error.
BLE_DFU_RESP_VAL_OPER_FAILED	Operation failed.

Function Documentation

uint32_t ble_dfu_bytes_rcvd_report	(	ble_dfu_t *	p_dfu ,
		uint32_t	num_of_firmware_bytes_rcvd
	)

Function for notifying the peer about the number of bytes of firmware data received.

Parameters

[in]	p_dfu	Pointer to the DFU service structure.
[in]	num_of_firmware_bytes_rcvd	Number of bytes.

Returns: NRF_SUCCESS if the DFU Service has successfully requested the SoftDevice to send the notification. Otherwise an error code. This function returns NRF_ERROR_INVALID_STATE if the device is not connected to a peer or if the DFU service is not initialized or if the notification of the DFU Status Report characteristic was not enabled by the peer. It returns NRF_ERROR_NULL if the pointer p_dfu is NULL.

uint32_t ble_dfu_init	(	ble_dfu_t *	p_dfu ,
		ble_dfu_init_t *	p_dfu_init
	)

Function for initializing the DFU service.

Parameters

[out]	p_dfu	Device Firmware Update service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify the service instance.
[in]	p_dfu_init	Information needed to initialize the service.

Returns: NRF_SUCCESS if the DFU service and its characteristics were successfully added to the SoftDevice. Otherwise an error code. This function returns NRF_ERROR_NULL if the value of evt_handler in p_dfu_init structure provided is NULL or if the pointers supplied as input are NULL.

void ble_dfu_on_ble_evt	(	ble_dfu_t *	p_dfu ,
		ble_evt_t *	p_ble_evt
	)

Function for handling a BLE event.

The DFU service expects the application to call this function each time an event is received from the SoftDevice. This function processes the event, if it is relevant for the DFU service and calls the DFU event handler of the application if necessary.

Parameters

[in]	p_dfu	Pointer to the DFU service structure.
[in]	p_ble_evt	Pointer to the event received from SoftDevice.

uint32_t ble_dfu_pkts_rcpt_notify	(	ble_dfu_t *	p_dfu ,
		uint32_t	num_of_firmware_bytes_rcvd
	)

Function for sending Packet Receipt Notification to the peer.

        This function will encode the number of bytes received as input parameter into a
        notification of the control point characteristic and send it to the peer.

Parameters

[in]	p_dfu	Pointer to the DFU service structure.
[in]	num_of_firmware_bytes_rcvd	Number of bytes of firmware image received.

Returns: NRF_SUCCESS if the DFU Service has successfully requested the SoftDevice to send the notification. Otherwise an error code. This function returns NRF_ERROR_INVALID_STATE if the device is not connected to a peer or if the DFU service is not initialized or if the notification of the DFU Status Report characteristic was not enabled by the peer. It returns NRF_ERROR_NULL if the pointer p_dfu is NULL.

uint32_t ble_dfu_response_send	(	ble_dfu_t *	p_dfu ,
		ble_dfu_procedure_t	dfu_proc ,
		ble_dfu_resp_val_t	resp_val
	)

Function for sending response to a control point command.

This function will encode a DFU Control Point response using the given input parameters and will send a notification of the same to the peer.

Parameters

[in]	p_dfu	Pointer to the DFU service structure.
[in]	dfu_proc	Procedure for which this response is to be sent.
[in]	resp_val	Response value.

Returns: NRF_SUCCESS if the DFU Service has successfully requested the SoftDevice to send the notification. Otherwise an error code. This function returns NRF_ERROR_INVALID_STATE if the device is not connected to a peer or if the DFU service is not initialized or if the notification of the DFU Status Report characteristic was not enabled by the peer. It returns NRF_ERROR_NULL if the pointer p_dfu is NULL.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation