nRF5 SDK v11.0.0
The simple timer driver can be used to create a single timer instance based on the TIMER1 peripheral. On time-out, a user-defined time-out handler is called directly from the TIMER1 interrupt handler.
The interrupt handler runs at priority level APP_LOW.
The following features are supported:
- Tickless timer.
- Two modes: single shot mode and repeated mode.
The following limitations are known:
- No more than one timer can run simultaneously.
- The timer is hard-coded to use the TIMER1 peripheral.
- The timer is hard-coded to 16-bit width mode.