NORDIC.RTPERIPHCTRL

Address offset: 0x7CC

RT peripheral control


Bit number				31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ID															F			E	E	D	D	D	D				C				B				A
Reset 0x00000000				0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0
ID	R/W	Field	Value ID	Value								Description
A	RW	CLOCKPOLARITY										Clock polarity This field is applicable only when OUTMODE.MODE = OutBBufToggleClk
			Low	0x0								Clock polarity is low
			High	0x1								Clock polarity is High
B	RW	STOPCOUNTERS										Stop counters CNT0 and CNT1 on OUTB under-run, or on INB Overflow if OUTMODE2 and INMODE2 This feature is used for clock stretching during OUTB under-run
			NoStop	0								Counters do not stop on OUTB under-run
			Stop	1								Counters stop on OUTB under-run Resume the counters when OUTB is written
C	RW	INSEL										Input pin selection
			SamePin	0x0								Sample on same OUT pin
			SeparatePin	0x1								Sample on separate pin (OUT+1)
D	RW	EVPINSEL										Event pin select Event pin select: VIO 0-15
E	RW	EVEDGE										Event pin edge
			AnyEdge	0x0								Any edge
			RisingEdge	0x1								Rising edge
			FallingEdge	0x2								Falling edge
F	RW	EVSAMPLE										Event pin sampling
			Continuous	0x0								Sample continuously
			Event	0x1								Sample on CNT1 event