| February 2025 |
1.6 |
The following content has been added or updated:
|
| June 2024 |
1.5 |
The following content has been added or updated:
|
| February 2024 |
1.4 |
The following content has been added or updated:
- Pin assignments – Updated description for A25, B12, B26, G1,
H2, and J31 pins connected to VSS in Reference circuitry
- Reference circuitry – Aligned pin names of A25,
B12, B26, G1, H2, and J31 with Pin assignments
- KMU – Access to OTP region must be full 32-bit word aligned
to a 32-bit address
- IPS – Added missing electrical parameter and guidance on
latency/jitter for between MCU subsystems
- CTRL-AP – Debugger side ERASEPROTECT.DISABLE is RW1
- Mechanical specification – Updated A3 dimension
according to Errata 162
- Mechanical specification – Added inner-to-outer
pad offset
- TWIM, TWIS – Clarified
Setup/hold time
- GPIO – Added Min/Max pull-up resistance
- REGULATORS – Added register VREGH.EXTSILENTEN
- RADIO – Added missing electrical parameter
Evm
- Editorial changes
|
| December 2023 |
1.3.1 |
The following content has been added or updated:
|
| October 2022 |
1.3 |
The following content has been added or updated:
- OSCILLATORS – Added high-frequency (32 MHz)
crystal oscillator (HFXO) equation
- Mechanical specification – Updated L
dimension according to Errata 154
- Current consumption – Updated COMPOUND10 according to Errata 152
- QSPI – Updated IFCONFIG0 and DPMDUR register
description
- RADIO – Updated ED_RSSISCALE
- GPIO – Added guidance on maximum combined GPIO
sink/source current
- Editorial changes
|
| September 2021 |
1.2 |
The following content has been added or updated:
|
| April 2021 |
1.1 |
The following content has been added or updated:
- Added WLCSP package variant information to the following chapters:
- Reference circuitry – nRF5340-QKAA Config. 1 updated; N/C capacitor
footprint removed; component designators re-ordered; schematic drawing
updates
- Reference circuitry – Added additional reference circuits for
nRF5340-QKAA and nRF5340-CLAA
- DPPI – Corrected number of DPPI channels (32) for the
network core
- RADIO – Added electrical parameters for TX only run
current, PRF = +3 dBm; clarified use of EDSAMPLE register in
combination with CCA
- Added electrical specifications for the following chapters:
- Product overview – Added missing SAADC
- Ordering information – Updated box labels
- Editorial changes
- Fixed error in document ID
|
| December 2020 |
1.0 |
First release |