In Transmitter tab, you can configure and test the transmission of the Bluetooth packets and verify the fidelity of the transmission.
Click Start test to start transmitting test packets.
The available settings are related to the DTM specification.
| Settings | Option | Description |
|---|---|---|
| Channel mode | Single | Transmit on the specified channel only. |
| Sweep | Transmit in the specified channel range. | |
| Channel settings | Transmit on channel | Channel on which to transmit test packets. |
| Transmit power | Power of the transmission, from -40 dBm to 8 dBm. | |
| Transmit period | Time during which to transmit. Only available for the Sweep mode. | |
| Physical layer | Select the PHY layers on which to transmit test packets. | |
| Packet type | Select the test pattern for the test packets. Constant carrier uses vendor-specific packet payload. |
|
| Packet length | Select the length of the packet. | |
| Timeout | Select the duration of time for which the device under test (DUT) waits for a response from another device. |