In the Receiver tab, you can configure and test the reception of the Bluetooth packets and verify the fidelity of the reception.
Click Start test to start receiving test packets.
The available settings are related to the DTM specification.
| Settings | Option | Description |
|---|---|---|
| Channel mode | Single | Receive on the specified channel only. |
| Sweep | Receive in the specified channel range. | |
| Channel settings | Receive on channel | Channel on which to receive test packets. |
| Receive period | Time during which to receive packets. Only available for the Sweep mode. | |
| Physical layer | Select the PHY layers on which to receive test packets. | |
| Timeout | Select the duration of time for which the device under test (DUT) waits for a response from another device. |