When sampling in the Scope mode, the sampling starts only when the specified Trigger settings are reached. The sampling then lasts for the specified Length value. The sampling always happens at 100 000 samples per second (100 kHz).
The following table lists all available Scope parameters.
| Option | Description |
|---|---|
| Length | Total time after the trigger event during which the application samples and displays the data. |
| Offset | Total time before the trigger event during which the application samples and displays the data. If sampling runs for a shorter period of time than the value of Offset when the trigger happens, only sampling for this shorter period of time is displayed. |
| Single | Select this option to stop sampling after one trigger event takes place. |
| Continuous | Select this option to continue sampling after one trigger event, and display trigger events until you click Stop. The first trigger must be fulfilled for the specified Length before another trigger can be displayed. |