When the cloud connects, the application runs its first cloud synchronization. It sends a device message ({"appId":"SMHA","messageType":"DATA","data":"hello"}), polls the device shadow, checks for firmware updates, and uploads pending remote debugging data. With the Wi-Fi location build, it also scans for Wi-Fi access points and logs the resolved position. The synchronization repeats every 10 minutes while the cloud stays connected (CONFIG_APP_MAIN_SYNC_INTERVAL_SECONDS).
- Wait for the first synchronization to complete in the host console, or press Button 1 (BUTTON0 on the DK) to start one right away. With no errors after
Cloud connected, the device is sending data. - Log in to nRF Cloud and find the device under its Device ID in the device list.