| Symbol | Description | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|
| VBUSOVP | Overvoltage protection threshold | 5.5 | V | ||
| VBUSVALIDR | VBUS valid threshold, VBUS - VBAT, VBUS rising | 210 | mV | ||
| VBUSVALIDF | VBUS valid threshold, VBUS - VBAT, VBUS falling or VBAT rising | 160 | mV | ||
| VBUSPOR | Power-on reset release voltage for VBUS | 3.9 | V | ||
| VBUSBOR | Brownout reset trigger for VBUS with VBAT not present | 3.8 | V | ||
| VBUSMIN | Undervoltage threshold with VBAT present | 3.6 | V | ||
| IBUS100MA | VBUS input current limit, 100 mA 1 | 95 | mA | ||
| IBUS500MA | VBUS input current limit, 500 mA 1 | 495 | mA | ||
| IBUSLIMACC | Accuracy of IBUS current limit (steps from 600 to 1500 mA)1 | -10 | +10 | % | |
| ISUSP |
VBUS current consumption in suspend mode Current from VBUSOUT is excluded |
1.8 | mA | ||
| RON |
Resistance between VBUS and VSYS VBUSINLIM0 = 15 (1.5 A) VBUS = 5 V |
300 | mΩ | ||
| RVBUSOUT |
On resistance of the VBUSOUT switch VBUS = 5.0 V |
7.5 | Ω | ||
| Rd | Pull-down resistance on pins CC1 and CC2 | 5.1 | kΩ | ||
| VRDCONN | Threshold to detect connection | 0.2 | V | ||
| VRD1A5 |
Threshold to detect charger type on CC1 or CC2 pins |
0.66 | V | ||
| VRD3A | Threshold for 3 A current limit | 1.23 | V | ||
| RPDVBUSOUT | Pull-down resistor on VBUSOUT pin when VBUS is disconnected. | 35 | kΩ | ||
| tRDDEB | Debounce time for CC voltage level detection | 15 | ms |
1Includes internal device consumption and current flowing through pin VBUSOUT.