The set command activates and deactivates the support of the Release Assistance Indication (RAI) feature. The command configuration is
stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is
set to minimum functionality mode with the +CFUN=0
command.
Active %XPOFWARN warning blocks the storing to NVM.v1.3.x≥2
Note: Access stratum RAI requires feature enabling with the %REL14FEAT command. %REL14FEAT is not
needed to activate control plane
RAI.
Syntax:
%RAI[=<rai>]The set command parameter and its defined values are the following:
- <rai>
- 0 – Deactivate.
The following command example activates RAI feature support:
AT%RAI=1
OK