[111] SAADC: Output data is incorrect when noise shaping is used

nRF54LM20A Revision 1 Errata

This anomaly applies to Revision 1, build code PAAA-B00.

It was inherited from the previous SoC revision Engineering B.

Symptoms

SAADC output is incorrect, which can be observed as large intermittent errors or data inversion.

Conditions

SAADC is configured in single-ended mode, noise shaping is enabled, and input amplitude is over 50% of the ADC core's input range with the selected gain setting.

Consequences

SAADC output is incorrect.

Workaround

Apply one of the following workarounds:
  • Use differential mode with negative input tied to GND.
  • Use single-ended mode and guarantee that the input amplitude does not exceed 50% of the ADC core's input range with the selected gain setting.