Macros
#define	NRF_BLE_SCAN_ENABLED
	Enabling the Scanning Module. More...
#define	NRF_BLE_SCAN_BUFFER
	Data length for an advertising set. More...
#define	NRF_BLE_SCAN_NAME_MAX_LEN
	Maximum size for the name to search in the advertisement report. More...
#define	NRF_BLE_SCAN_SHORT_NAME_MAX_LEN
	Maximum size of the short name to search for in the advertisement report. More...
#define	NRF_BLE_SCAN_SCAN_INTERVAL
	Scanning interval. Determines the scan interval in units of 0.625 millisecond. More...
#define	NRF_BLE_SCAN_SCAN_DURATION
	Duration of a scanning session in units of 10 ms. Range: 0x0001 - 0xFFFF (10 ms to 10.9225 ms). If set to 0x0000, the scanning continues until it is explicitly disabled. More...
#define	NRF_BLE_SCAN_SCAN_WINDOW
	Scanning window. Determines the scanning window in units of 0.625 millisecond. More...
#define	NRF_BLE_SCAN_MIN_CONNECTION_INTERVAL
	Determines minimum connection interval in milliseconds. More...
#define	NRF_BLE_SCAN_MAX_CONNECTION_INTERVAL
	Determines maximum connection interval in milliseconds. More...
#define	NRF_BLE_SCAN_SLAVE_LATENCY
	Determines the slave latency in counts of connection events. More...
#define	NRF_BLE_SCAN_SUPERVISION_TIMEOUT
	Determines the supervision time-out in units of 10 millisecond. More...
#define	NRF_BLE_SCAN_SCAN_PHY
	PHY to scan on. More...
#define	NRF_BLE_SCAN_FILTER_ENABLE
	Enabling filters for the Scanning Module. More...
#define	NRF_BLE_SCAN_UUID_CNT
	Number of filters for UUIDs. More...
#define	NRF_BLE_SCAN_NAME_CNT
	Number of name filters. More...
#define	NRF_BLE_SCAN_SHORT_NAME_CNT
	Number of short name filters. More...
#define	NRF_BLE_SCAN_ADDRESS_CNT
	Number of address filters. More...
#define	NRF_BLE_SCAN_APPEARANCE_CNT
	Number of appearance filters. More...

Detailed Description

Macro Definition Documentation

#define NRF_BLE_SCAN_ADDRESS_CNT

Number of address filters.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_APPEARANCE_CNT

Number of appearance filters.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_BUFFER

Data length for an advertising set.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_ENABLED

Enabling the Scanning Module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_FILTER_ENABLE

Enabling filters for the Scanning Module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_MAX_CONNECTION_INTERVAL

Determines maximum connection interval in milliseconds.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_MIN_CONNECTION_INTERVAL

Determines minimum connection interval in milliseconds.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_NAME_CNT

Number of name filters.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_NAME_MAX_LEN

Maximum size for the name to search in the advertisement report.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SCAN_DURATION

Duration of a scanning session in units of 10 ms. Range: 0x0001 - 0xFFFF (10 ms to 10.9225 ms). If set to 0x0000, the scanning continues until it is explicitly disabled.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SCAN_INTERVAL

Scanning interval. Determines the scan interval in units of 0.625 millisecond.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SCAN_PHY

PHY to scan on.

Following options are available:

• 0 - BLE_GAP_PHY_AUTO
• 1 - BLE_GAP_PHY_1MBPS
• 2 - BLE_GAP_PHY_2MBPS
• 4 - BLE_GAP_PHY_CODED
• 255 - BLE_GAP_PHY_NOT_SET

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SCAN_WINDOW

Scanning window. Determines the scanning window in units of 0.625 millisecond.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SHORT_NAME_CNT

Number of short name filters.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SHORT_NAME_MAX_LEN

Maximum size of the short name to search for in the advertisement report.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SLAVE_LATENCY

Determines the slave latency in counts of connection events.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_SUPERVISION_TIMEOUT

Determines the supervision time-out in units of 10 millisecond.

Note

This is an NRF_CONFIG macro.

#define NRF_BLE_SCAN_UUID_CNT

Number of filters for UUIDs.

Note

This is an NRF_CONFIG macro.