The Blinky FreeRTOS example shows FreeRTOS features like Task, TaskDelay, and Timer.

When the application starts, two GPIO pins are configured using the BSP module as outputs to drive the LEDs. Then, a new thread and a timer are created.

Setup

You can find the source code and the project file of the example in the following folder: <InstallFolder>\examples\peripheral\blinky_freertos

LED assignments:

• LED 1 and LED 2: Blinking.

Testing

Test the Blinky FreeRTOS Example application by performing the following steps:

1. Compile and program the application.
2. Observe that the LEDs are blinking.

Note

See FreeRTOS support for more information about FreeRTOS.