How to flash a single board

nRF Connect for VS Code
tags
nRF Connect for VS Code

To flash the active build configuration of your application onto one device, complete the following steps:

  1. Make sure your board is connected to your machine and appears in the Connected Devices View.

  2. Click on the Flash option from the Actions View.

    Tip

    In some cases, for example when you want to erase UICR, you can use Erase and Flash to Board.

  3. If you have multiple boards connected, pick one device to flash when a prompt appears at the top of the screen.

Once the flashing starts, a small notification banner appears in the bottom right corner of VS Code to display the progress and confirm when the flashing is complete.