Errata EngB nRF52832

nRF52832 Engineering B Errata
Change log
New and inherited anomalies
[12] COMP: Reference ladder is not correctly calibrated
[15] POWER: RAM[x].POWERSET/CLR read as zero
[20] RTC: Register values are invalid
[31] CLOCK: Calibration values are not correctly loaded from FICR at reset
[36] CLOCK: Some registers are not reset when expected
[51] I2S: Aligned stereo slave mode does not work
[54] I2S: Wrong LRCK polarity in Aligned mode
[55] I2S: RXPTRUPD and TXPTRUPD events asserted after STOP
[58] SPIM: An additional byte is clocked out when RXD.MAXCNT = 1
[62] NFCT: Can draw current when not enabled
[63] POWER: DC/DC does not automatically switch off in System ON IDLE
[64] NFCT: Only full bytes can be received or transmitted, but supports 4-bit frame transmit
[67] NFCT,PPI: Some events cannot be used with the PPI
[68] CLOCK: EVENTS_HFCLKSTARTED can be generated before HFCLK is stable
[70] COMP: Not able to wake CPU from System ON IDLE
[71] CLOCK: RCOSC calibration
[72] NFCT,PPI: TASKS_ACTIVATE cannot be used with the PPI
[73] TIMER: Event lost
[74] SAADC: Started events fires prematurely
[75] MWU: Increased current consumption
[76] LPCOMP: READY event is set sooner than it should
[77] CLOCK: RC oscillator is not calibrated when first started
[78] TIMER: High current consumption when using timer STOP task only
[79] NFCT: A false EVENTS_FIELDDETECTED event occurs after the field is lost
[81] GPIO: PIN_CNF is not retained when in debug interface mode
[83] TWIS: STOPPED event occurs twice if the STOP task is triggered during a transaction
[84] COMP: ISOURCE not functional
[86] SAADC: Triggering START task after offset calibration may write a sample to RAM
[87] CPU: Unexpected wake from System ON Idle when using FPU
[88] WDT: Increased current consumption when configured to pause in System ON idle
[89] TWI: Static 400 µA current while using GPIOTE
[97] GPIOTE: High current consumption in System ON Idle mode
[108] RAM: RAM content cannot be trusted upon waking up from System ON Idle or System OFF mode
Fixed anomalies

Back to home page